ZnBO-doped (Ba, Sr)TiO3 ceramics for the low-temperature sintering process

ZnBO-doped (Ba, Sr)TiO₃ ceramics were investigated for low-temperature co-fired ceramics (LTCCs) applications. Until now, B₂O₃ and Li₂CO₃ dopants have been commonly employed as the low-temperature sintering aids. In this paper, we suggest ZnBO as an alternative dopant to the B₂O₃ and Li₂CO₃. To reduce the sintering temperature of (Ba, Sr)TiO₃, we have added 1–5 wt.% of ZnBO to (Ba, Sr)TiO₃. ZnBO-doped (Ba, Sr)TiO₃ ceramics were respectively sintered from 750 to 1350 °C by 50 °C to confirm the sintering temperature with different dopant contents. By adding 5 wt.% of ZnBO to the (Ba, Sr)TiO₃ ceramics, the sintering temperature of (Ba, Sr)TiO₃ ceramics can be reduced to 1100 °C. From the XRD analysis, ZnBO-doped (Ba, Sr)TiO₃ has no pyro phase. By adding ZnBO dopants to (Ba, Sr)TiO₃ ceramics, both of relative dielectric permittivity and loss tangent were decreased. From the frequency dispersion of dielectric properties, the relative dielectric permittivity and loss tangent of 5 wt.% ZnBO-doped (Ba, Sr)TiO₃ were 1180 and 3.3 × 10⁻³, while those of BST were 1585 and 4.8 × 10⁻³, respectively.     

Synthesis and characterization of propylene‐α‐olefin random copolymers with isotactic propylene sequence. II. Propylene–hexene‐1 random copolymers

A series of novel hexene‐1–propylene random copolymers with isotactic sequence of propylene was synthesized with a MgCl₂‐supported Cr(acac)₃ catalyst. The molecular weight distribution of copolymers and homopolymers was considerably narrower than that of typical polyolefins produced by heterogeneous Ziegler–Natta catalysts. The crystallizability of the copolymers having a propylene‐unit content of more than 50 mol % drastically decreased with decreasing propylene‐unit content, and the copolymers with a propylene content of less than 50 mol % were completely amorphous. In the present novel type of random copolymers with crystallizable and noncrystallizable units, a single glass transition was observed between pure polypropylene and polyhexene‐1, and a major component was found to govern the final morphology and the mechanical characteristics. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2949–2954, 2004     

Mobile Oriented Future Internet (MOFI):Architectural Design and Implementations

With the recent growth in smartphone services, the “mobile” environment has become a key factor to consider in the design of the future Internet. In this paper, we propose Mobile‐Oriented Future Internet (MOFI), which is a new architecture for the future Internet for mobile‐oriented environments. The MOFI architecture is designed with three functional features: global identifier and local locator in the identifier‐locator separation, query‐first data delivery for route optimization, and distributed control of identifier‐locator mapping. The proposed architecture and functional operations are implemented and tested using the Linux platform. From the experiment results, we see that the MOFI architecture performs better than the existing identifier‐locator separation schemes, such as Proxy Mobile IP and Host Identity Protocol, in terms of data throughout, mapping control overhead, and handover delay.     

Criteria for versatile GaN MOVPE tool:high growth rate GaN by atmospheric pressure growth

Growth rate has a direct impact on the productivity of nitride LED production.Atmospheric pressure growth of GaN with a growth rate as high as 10μm/h and also Al_0.1Ga_0.9N growth of 1μm/h by using 4 inch by 11 production scale MOVPE are described.XRD of（002） and（102） direction was 200 arcsec and 250 arcsec, respectively.Impact of the growth rate on productivity is discussed.     

How necessary is a fast testkit for mitigation of pandemic flu?

It is widely feared that a novel, highly pathogenic, human transmissible influenza virus may evolve that could cause the next global pandemic. Mitigating the spread of such an influenza pandemic would require not only the timely administration of antiviral drugs to those infected, but also the implementation of suitable intervention policies for stunting the spread of the virus. Towards this end, mathematical modelling and simulation studies are crucial as they allow us to evaluate the predicted effectiveness of the various intervention policies before enforcing them. Diagnosis plays a vital role in the overall pandemic management framework by detecting and distinguishing the pathogenic strain from the less threatening seasonal strains and other influenza-like illnesses. This allows treatment and intervention to be deployed effectively, given limited antiviral supplies and other resources. However, the time required to design a fast and accurate testkit for novel strains may limit the role of diagnosis. Herein, we aim to investigate the cost and effectiveness of different diagnostic methods using a stochastic agent-based city-scale model, and then address the issue of whether conventional testing approaches, when used with appropriate intervention policies, can be as effective as fast testkits in containing a pandemic outbreak. We found that for mitigation purposes, fast and accurate testkits are not necessary as long as sufficient medication is given, and are generally recommended only when used with extensive contact tracing and prophylaxis. Additionally, in the event of insufficient medication and fast testkits, the use of slower, conventional testkits together with proper isolation policies while waiting for the diagnostic results can be an equally effective substitute.     

Biomolecular screening with encoded porous-silicon photonic crystals

Strategies to encode or label small particles or beads for use in high-throughput screening and bioassay applications focus on either spatially differentiated, on-chip arrays or random distributions of encoded beads. Attempts to encode large numbers of polymeric, metallic or glass beads in random arrays or in fluid suspension have used a variety of entities to provide coded elements (bits)--fluorescent molecules, molecules with specific vibrational signatures, quantum dots, or discrete metallic layers. Here we report a method for optically encoding micrometre-sized nanostructured particles of porous silicon. We generate multilayered porous films in crystalline silicon using a periodic electrochemical etch. This results in photonic crystals with well-resolved and narrow optical reflectivity features, whose wavelengths are determined by the etching parameters. Millions of possible codes can be prepared this way. Micrometre-sized particles are then produced by ultrasonic fracture, mechanical grinding or by lithographic means. A simple antibody-based bioassay using fluorescently tagged proteins demonstrates the encoding strategy in biologically relevant media.     

A Managerial Perspective on Electronic Commerce Development in Malaysia

This research investigates the development of electronic commerce in Malaysia. It reviews the nation's e-commerce readiness and surveys local firms, a majority of them small- and medium-sized enterprises (SMEs), on their Web presence and e-commerce initiatives, management, capabilities and performance. Overall, while e-commerce in Malaysia is in its formative phases, a majority of firms in the survey sample have progressed beyond brochureware into the interactions phase; few have reached the e-commerce phase but many are planning to. They are driven primarily by marketing considerations and have seen the greatest impact of e-commerce on their marketing and overall business operations. Taking the lead are SMEs in IT/Internet services and solutions that see great opportunities in the nation's need to build the foundation layers for its emerging Internet economy. Most reluctant and least satisfied to date are SMEs in manufacturing that find the business-to-business sector largely undeveloped. The government can take some credits for its leadership in addressing the barriers to e-commerce development but the most significant barriers falls squarely within the private sector's domain. They will have to be overcome by entrepreneurial talents and management foresight.     

Analysis of spatial arrangement of particles in thin foil of Al-Al4C3 material

TEM images of thin foils with quasi-globular particles are examined by means of two methods of spatial statistics. The spatial arrangement of particle reference points is described by means of quadrat count statistics and by polygonal method (the analysis of the Voronoi mosaic generated by patterns of particle reference points). A good agreement between the both approaches is found, the polygonal method is more sensitive and its results are more conclusive.     

MEAN STRESS EFFECTS ON LOW CYCLE FATIGUE FOR A HIGH STRENGTH STEEL

Abstract— ASTM A723 Q & T steel with a yield strength and ultimate strength of 1170 and 1262 MPa respectively was evaluated for mean stress-strain effects under smooth specimen axial strain controlled low cycle fatigue conditions with strain ratios R of −2, −1, 0, 0.5 and 0.75. Cycles to failure ranged from 15 to 10⁵. Cyclic stress-strain response based upon half-life hysteresis loop peaks were similar for all R ratios. Mean stress relaxation occurred for R ≠−1 only when plastic strain amplitudes were present and this occurred above total strain amplitudes of 0.005. Thus, mean stress relaxation was completely dependent upon cyclic plasticity. Mean strains did not affect low cycle fatigue life unless accompanied by half-life mean stress. Tensile mean stress was detrimental and compressive mean stress was beneficial and these effects only occurred at strain ampltidues below 0.005. Three different mean stress models were used to evaluate the low cycle fatigue data and the SWT log-log linear model best represented the data. These results can be used with the local notch strain fatigue life prediction methodology.