Determination of ethyl carbamate in some fermented Korean foods and beverages

Ethyl carbamate has been associated with cancer for several decades. It is mainly found in fermented foods and beverages. In view of the importance of fermented foods in the Korean diet and the significant level of ethyl carbamate expected, we determined ethyl carbamate concentrations in some of the staple food items and estimated the daily intake for the Korean population. Ethyl carbamate in commercial samples of kimchi, soy sauce, vinegar, soybean paste, and alcoholic beverages were determined by gas chromatography-mass spectrometry/selective ion monitoring (GC-MS/SIM). Homemade soy sauce and kimchi were also analysed. The maximum ethyl carbamate concentrations observed were 73 mu g/kg in soy sauce, 7.9 mu g/kg in soybean paste, 2.5 mu g/l in vinegar, 16.2 mu g/kg in kimchi and 15.4 mu/l in Korean traditional alcoholic beverages. Combining these values with the average daily food intake data, we estimated that the maximum daily exposure of Korean population to ethyl carbamate is 2.8 mu g/day, which is not a negligible amount considering the 'virtually safe dose' derived by animal experiment ranges between 1.2 and 4.8 mu g/day. It would be desirable to closely monitor ethyl carbamate levels in Korean foods and to find ways to reduce the daily intake.     

Proteome profiling of exosomes derived from plasma of heifers with divergent genetic merit for fertility

The current study evaluated exosomes isolated from plasma of heifers bred to have high or low fertility through developing extreme diversity in fertility breeding values, however, key animal traits (e.g., body weight, milk production, and percentage of North American genetics) remained similar between the 2 groups. The exosomes were isolated by a combined ultracentrifugation and size exclusion chromatography approach and characterized by their size distribution (nanoparticle tracking analysis), morphology (transmission electron microscopy), and presence of exosomal markers (immunoblotting). In addition, a targeted mass spectrometry approach was used to confirm the presence of 2 exosomal markers, tumor susceptibility gene 101 and flotillin 1. The number of exosomes from plasma of high fertility heifers was greater compared with low fertility heifers. Interestingly, the exosomal proteomic profile, evaluated using mass spectrometry, identified 89 and 116 proteins in the high and low fertility heifers respectively, of which 4 and 31 were unique, respectively. These include proteins associated with specific biological processes and molecular functions of fertility. Most notably, the tetratricopeptide repeat protein 41-related, glycodelin, and kelch-like protein 8 were identified in plasma exosomes unique to the low fertility heifers. These proteins are suggested to play a role in reproduction; however, the role of these proteins in dairy cow reproduction remains to be elucidated. Their identification underscores the potential for proteins within exosomes to provide information on the fertility status and physiological condition of the cow. This may potentially lead to the development of prognostic tools and interventions to improving dairy cow fertility.     

High performance microshield line components

Several millimeter-wave passive components have been fabricated using the microshield transmission line geometry, and their performance is presented herein. Microshield is a quasi-planar, half-shielded design which uses a thin dielectric membrane (1.5 μm) to support the conducting lines. This approach provides a nearly homogeneous, air-filled environment and thus allows extremely broad-band TEM operation. This paper examines the conductor loss and effective dielectric constant of microshield lines and presents results on transitions to conventional coplanar waveguide, right-angle bends, different stub configurations, and lowpass and bandpass filters. Experimental data is provided along with numerical results derived from an integral equation method. The microshield line is shown to be very suitable for high performance millimeter and submillimeter-wave applications     

Miniature and tunable filters using MEMS capacitors

Microelectromechanical system (MEMS) bridge capacitors have been used to design miniature and tunable bandpass filters at 18-22 GHz. Using coplanar waveguide transmission lines on a quartz substrate (/spl epsiv//sub r/ = 3.8, tan/spl delta/ = 0.0002), a miniature three-pole filter was developed with 8.6% bandwidth based on high-Q MEMS bridge capacitors. The miniature filter is approximately 3.5 times smaller than the standard filter with a midband insertion loss of 2.9 dB at 21.1 GHz. The MEMS bridges in this design can also be used as varactors to tune the passband. Such a tunable filter was made on a glass substrate (/spl epsiv//sub r/ = 4.6, tan/spl delta/ = 0.006). Over a tuning range of 14% from 18.6 to 21.4 GHz, the miniature tunable filter has a fractional bandwidth of 7.5 /spl plusmn/ 0.2% and a midband insertion loss of 3.85-4.15 dB. The IIP/sub 3/ of the miniature-tunable filter is measured at 32 dBm for the difference frequency of 50 kHz. The IIP/sub 3/ increases to >50 dBm for difference frequencies greater than 150 kHz. Simple mechanical simulation with a maximum dc and ac (ramp) tuning voltages of 50 V indicates that the filter can tune at a conservative rate of 150-300 MHz//spl mu/s.     

Offset-trimming bit-line sensing scheme for gigabit-scale DRAM's

A new offset-trimming bit-line sensing scheme is described which is suitable for gigabit-scale DRAM's. This sensing scheme can suppress the sensitivity degradation caused by the large electrical parameter variation of deep submicron transistors. The effective offset voltage dependence on trimming time is analyzed and verified with simulation results. As compared with a conventional direct sensing scheme, the proposed scheme shows remarkable improvement on the sensitivity. A test device was fabricated with a 0.25 μm CMOS technology and its measurement results indicate the successful operation of offset-trimming     

Multiple cerebellar infarction due to vertebral artery obstruction and bulbar symptoms associated with vertical subluxation and atlanto-occipital subluxation in ankylosing spondylitis

Ankylosing spondylitis (AS) results in disease-specific inflammation at the site of ligamentous insertion into the bone. Atlantoaxial joint subluxation and vertical subluxation of the axis may occur as a consequence of instability resulting from the inflammatory process. Spontaneous anterior atlantoaxial subluxation is a well recognized complication in about 2% of patients with AS, and presents with or without signs of spinal cord compression. Vertical subluxation may follow anterior or posterior subluxation. It was noted in 3-8% of patients with rheumatoid arthritis, but is an exceedingly rare complication of AS. Moreover, it has never been reported that multiple cerebellar infarction and bulbar symptoms developed spontaneously due to atlanto-occipital subluxation and vertical subluxation in a patient with a long [corrected] history of AS. We describe a man with AS who developed multiple cerebellar infarction due to vertebral artery obstruction and bulbar symptoms associated with atlanto-occipital subluxation and vertical subluxation.     

Design on semiconductor coupled SAW convolver

This paper presents results of a design study on a semiconductor coupled surface acoustic wave (SAW) convolver in which bi-directionally propagating SAWs, on a piezoelectric substrate with a high coupling coefficient, couple with bonded semiconductor diodes through multistrips. To obtain convolution signals with a high efficiency, we adopted a diode-balanced bridge structure for the nonlinear operation. We also found that the tapping pitches of the multi-strip electrodes have robustness against operation frequency variation and temperature-dependent variation on the delay of the SAW. We verified the effectiveness of the device in. a circuit simulation and an experiment on a test circuit, which was fabricated by using an epitaxial lift-off film-bonding process.     

Processing properties of Korean rice varieties in relation to rice noodle quality

The purpose of this study was to investigate the physicochemical and pasting properties of rice developed in Korea in relation to noodle quality. Two indica lines (Hanareumbyeo and Chenmaai) and 7 japonica lines (Jinsumi, Goamibyeo, Manmibyeo, Milyang261, Seolgaeng, Suweon517, and YR24088 Acp9) were wet milled followed by lyophilized and passed through a 115 mesh sieve. The amylose contents were varied from 10.1 to 32.1%. Among them, Milyang261 showed unique paste viscosity although its amylose content was very high as 32.1% with poor cooking properties. Except Milyang261 and Suweon517, the high amylose content lines of Chenmaai, Goamibyeo, and YR24088 Acp9 showed desirable cooking properties in cooking loss, tensile strength, and texture profile. No item was selected as a key factor for rice noodles. However, amylose content, paste viscosity, and damaged starch could be positive components for improvement of rice noodle quality. The high amylose line of Chenmaai, YR24088 Acp9, and Goamibyeo showed the most appropriate properties for making extruded rice noodles with good cooking and textural properties. The paste properties, damaged starch, and high amylose content of the flour can be used as indicators of the rice noodle quality.