Statistical algorithm for nonuniformity correction in focal-plane arrays.

A statistical algorithm has been developed to compensate for the fixed-pattern noise associated with spatial nonuniformity and temporal drift in the response of focal-plane array infrared imaging systems. The algorithm uses initial scene data to generate initial estimates of the gain, the offset, and the variance of the additive electronic noise of each detector element. The algorithm then updates these parameters by use of subsequent frames and uses the updated parameters to restore the true image by use of a least-mean-square error finite-impulse-response filter. The algorithm is applied to infrared data, and the restored images compare favorably with those restored by use of a multiple-point calibration technique.     

Geology and fluid chemistry of the Fushime geothermal field, Kyushu, Japan

The Fushime geothermal field is located in a depression close to the coast line. The system is characterized by very high reservoir temperature (>350°C), and a high salinity production fluid. Geological analysis shows that the main reservoir in this field occurs in a fractured zone developed around a dacite intrusion located in the center of the field. High permeability zones recognized by drilling data are found to be associated with fault zones. One of these zones is clearly associated with a NW–SE trending andesite dike swarm which was encountered in some wells.Alteration in the system can be divided into four zones, in order of increasing temperature, based on calcium–magnesium aluminosilicate mineral assemblages: i.e., the smectite, transition, chlorite and epidote zones. The feed zone is located in the chlorite and epidote zones, which can be further divided into three sub-zones according to their potassium or sodium aluminosilicate mineralogy, from the center of the discharge zone: K-feldspar–quartz, sericite–quartz, and albite–chlorite zones.Chloride concentration of the sea-water is 19,800 mg/l, and Br/Cl mole ratio is 1.55. Based on geochemical information, the reservoir chloride concentration of this field ranges from 11,600 to 22,000 mg/kg. The Clres (Cl in reservoir), Br/Cl ratios and stable isotope data indicate that the Fushime geothermal fluid originated from sea-water and is diluted by ground water during its ascent. Some fluids produced from geothermal wells show low pH (about 4). It is thought that sulfide mineral (PbS, ZnS) precipitation during production produces this acidic fluid.     

Study of the basic welding characteristics of Mg alloy

Offering the advantages of lightweight and high specific strength, magnesium (Mg) alloys are extensively used in the manufacture of automotive parts and light-gauge box-type products, such as laptop computers, mobile phones, etc, which are expected to see lighter-weight applications in future. Presently available Mg alloy products, however, are manufactured by molten or semi-molten working in diecasting or thixomoulding processes, with applications technology currently at the development stage. Suitable techniques for the further development of Mg alloy manufacturing technology include plastic working of wrought alloys and assembly of products with complex shapes by welding. This study focuses on TIG welding as a widely practised and convenient technique for assembly of general metal products. The article examines the basic welding characteristics of an Mg alloy equivalent to AZ31 as an Mg alloy in widespread practical use together with the deformation properties of the proposed alloy. A suitable welding procedure is then investigated. Also discussed is an assembly method for products in consideration of the working and welding characteristics of the proposed alloy.     

Validation of temporal BRDFs of paddy fields estimated from MODIS reflectance data

The effect of the bidirectional reflectance distribution function (BRDF) is one of the most important factors in correcting and validating the reflectance obtained from remotely sensed data. While the importance of BRDF has become widely recognized, bidirectional reflectance factor (BRF) data measured for correction and validation are insufficient because of the technical difficulty of the measurement. The primary objective of the present research is to estimate BRDF effects from Moderate Resolution Imaging Spectroradiometer (MODIS) data. Temporal ground-based BRDFs of rice paddy fields were estimated from ground measurements conducted in June and August 2002. MODIS-derived BRDFs obtained from MODIS reflectance data and ground-based BRDFs were estimated using the reciprocal form of the RossThick and LiSparse (RossThick-LiSparse-R) kernels, a semiempirical BRDF model adopted for the operational MODIS BRDF product. The MODIS-derived band 1 (620-680 nm) and band 2 (841-876 nm) BRDFs were compared with the ground-based BRDFs corresponding to the same waveband, respectively. The comparison results demonstrate that BRDFs of paddy fields change in accordance with paddy growth and that MODIS-derived BRDFs are closely related to ground-based BRDFs in most of the cases. It was also revealed that MODIS-derived BRDFs can be estimated to a high degree of accuracy when MODIS data necessary for the estimation are available.     

Effect of Al concentration on pseudoelasticity in Fe3Al single crystals

Pseudoelasticity in Fe₃Al single crystals with different Al contents was investigated focusing on the dislocation configuration and the ordered domain structure. Giant pseudoelasticity only appeared in the D0₃-ordered Fe₃Al single crystals, while the B2-ordered crystals and those with the disordered phase exhibited small strain recovery. The amount of shape recovery in the D0₃-ordered crystals showed a maximum near 23.0at.%Al and decreased with increasing deviation from this Al concentration. In the D0₃ phase at 22.0–25.0at.%Al, 1/4[1 1 1] superpartial dislocations moved individually dragging the nearest-neighbour antiphase boundaries (NNAPB), while couplets of the superpartials were observed to bow out, dragging the next-nearest-neighbour antiphase boundaries (NNNAPB) in Fe–28.0at.%Al. In Fe–22.0–25.0at.%Al single crystals, the NNAPB pulled back the superpartials to decrease its energy during unloading, resulting in the giant pseudoelasticity. In contrast, the surface tension of the NNNAPB was lower than that of the NNAPB, leading to the small strain recovery in Fe–28.0at.%Al.     

A specific and rapid method for determination of adenosine 3'-monophosphate (3'-AMP) content and 3'-AMP forming enzyme activity in rat liver mitochondria, using reversed-phase HPLC with fluorescence detection

To study the physiological significance of adenosine 3'-monophosphate (3'-AMP), an intracellular P-site inhibitor of adenylate cyclase, in rat liver mitochondria, a specific, rapid and reliable assay method for determination of 3'-AMP and the activity of its forming enzyme is required. 3'-AMP in rat liver was determined to be ca. 23+/-7 nmol/g wet weight, but no 2-deoxy-3'-AMP, another P-site inhibitor of adenylate cyclase, was detected, even when using a reversed-phase HPLC column with a fluorescent-reaction, as established in this study. By using the optimized assay method developed here, 3'-AMP forming enzyme activity in rat crude mitochondrial extract was found to be enhanced by EDTA and inhibited by p-chloromercurybenzoate. The optimum pH was ca. 5.8 and no divalent cation was required for activity. From these results, 3'-AMP forming enzyme(s) in rat liver mitochondria could be classified as acid exoribonuclease, which mainly existed in an active form. The results obtained in this study will help to gain more insight into the physiological roles of 3'-AMP in living systems.     

Stationary probability density of a class of non-linear dynamical systems to stochastic excitation

The response of a dynamical system to Gaussian white-noise excitations may be represented by the Markov process whose probability density is governed by the well-known Fokker-Plank equation. In this paper a general procedure is developed to obtain the solution for Fokker-Plank equation in the state of statistical stationary. The dynamical systems considered are generally non-linear. This paper also demonstrates that the stationary joint probability density of the coordinates and velocity may possess the form of a separate product for the systems both non-linear damping and non-linear restoring forces.