Electrical linewidth test structures fabricated in monocrystallinefilms for reference-material applications

The physical widths of reference features incorporated into electrical linewidth test structures patterned in films of monocrystalline silicon have been determined from Kelvin voltage measurements. The films in which the test structures are patterned are electrically insulated from the bulk-silicon substrate by a layer of silicon dioxide provided by SIMOX (Separation by the IMplantation of OXygen) processing. The motivation is to facilitate the development of linewidth reference materials for critical-dimension (CD) metrology-instrument calibration. The selection of the (110) orientation of the starting silicon and the orientation of the structures' features relative to the crystal lattice enable a lattice-plane-selective etch to generate reference-feature properties of rectangular cross section and atomically planar sidewalls. These properties are highly desirable for CD applications in which feature widths are certified with nanometer-level uncertainty for use by a diverse range of CD instruments. End applications include the development and calibration of new generations of CD instruments directed at controlling processes for manufacturing devices having sub-quarter-micrometer features     

A unified diode model for circuit simulation

A new commercially available diode model is described. This unified model is capable of simulating the widest range of diode technologies of any presently available. The emphasis of this paper is on describing the model's extensive features and flexibility in the different domains of operation and is of particular interest in power applications     

Interactions of lactone, carboxylate and self-aggregated forms of camptothecin with human and bovine serum albumins

Highly degenerate primers to conserved regions of the eukaryotic phosphoinositol-specific phospholipase C (PLC) were used to amplify fragments of plant PLCs from Arabidopsis thaliana genomic DNA. Eight completely different fragment sequences that showed high homology to PLCs of both animals and plants were isolated. The variation between these putative PLCs was high and suggests that, like animals, plants have multiple isoforms of PLC. Using one of the PCR clones, we isolated a corresponding full-length Arabidopsis PLC gene (ATHATPLC1G), and sequence analysis indicated that it was most like a delta-type PLC. This gene is 2.5 kb and contains seven introns, all but one of which has intron/exon border sequences that conform to the Arabidopsis consensus. The structural complexity of the gene is relatively simple compared to mammalian beta-type PLCs that can be 15 kb long with up to 30 introns. The plant gene is a single copy and was mapped to four Arabidopsis YACs, one located on chromosome 2. The promoter region contained two TATA-like elements at -43 and -185 and other putative regulatory elements that suggest that this PLC is hormonally regulated. This is the first plant PLC gene and the first delta type-PLC gene from a higher organism to be sequenced.     

Predictors of underlying coronary artery disease in cocaine associated myocardial infarction: a meta-analysis of case reports

A preliminary report presenting the results of fibular strut grafting in the severely resorbed mandibular and maxillary region is presented. Thirteen patients were treated due to severe resorption of alveolar and basilar bone of 49 segments of the mandible and the maxilla. Two patients additionally had pathological fractures of the mandible. In 10 cases the strut graft was harvested by means of a new minimally invasive technique. After modelling the fibular bone it was fixed to the recipient site by miniscrews or implants. After a mean follow-up period of 20 months (max. 31, min. 11 months) a retrospective analysis of clinical and radiological findings was carried out. It showed that a mean augmentation of 16 mm was achieved. Compared to other studies the fibular strut graft was resorbed less, and due to the primary stability it could be used for the treatment of fractures of the mandible. No more than natural resorption was observed when the patients received their prostheses fixed to dental implants.     

Conditions for reliable dewatering systems based on voidless drainage in slightly permeable soils

Conclusions 1. Use of dewatering systems based on voidless drainage is most effective when dewatering slightly permeable soils in regions with a deep seasonal frost. 2. Two-story drainage with the upper and lower stories spaced 30 m apart accelerates the discharge of gravitational water from the arable layer. Results of observations on two-story drainage in experimental-production sections indicated that it discharges 2 – 3.8 times more water than systematic tubular drainage with an interdrain spacing of 10 m and a 0.2-m thick three-dimensional filter of a sandy-gravelly mixture. 3. It is recommended to use crushed stone and porous-clay gravel with a fineness of 10 – 20 mm as a filler. In that case, protection of the drain filler is, as a rule, required only from the intrusion of soil from above during construction in cohesive soils with a plasticity indexW _p≥7. 4. seepage rate in a voidless drain should be lower than the scouring velocity for the soil in which the voidless drainage is placed. In the opposite case, it is necessary to lower the grade of the drains or select a filler gradation such that the seepage rate in the drain be lower than the scouring velocity. Translated from Gidrotekhnicheskoe Stroitel’stvo, No. 8, pp. 41–43, August, 1998.     

Error in the UNITY substitution rule for subscripted operators

UNITY, introduced by Chandy and Misra [ChM88], is a programming logic intended to reason about temporal properties of distributed programs. Despite the fact that UNITY does not have the full power of, for example, linear temporal logic, it enjoys popularity due to its simplicity.There was however a serious problem with the Substitution Rule. The logic is incomplete without the rule, and with the rule it is inconsistent.     

Performance evaluation of rule grouping on a real-time expertsystem architecture

Uses a Markov process to model a real-time expert system architecture characterized by message passing and event-driven scheduling. The model is applied to the performance evaluation of rule grouping for real-time expert systems running on this architecture. An optimizing algorithm based on Kernighan-Lin heuristic graph partitioning for the real-time architecture is developed and a demonstration system based on the model and algorithm has been developed and tested on a portion of the advanced GPS receiver (AGR) and manned manoeuvring unit (MMU) knowledge bases     

Sort vs. hash revisited

Efficient algorithms for processing large volumes of data are very important both for relational and new object-oriented database systems. Many query-processing operations can be implemented using sort- or hash-based algorithms, e.g. intersections, joins, and duplicate elimination. In the early relational database systems, only sort-based algorithms were employed. In the last decade, hash-based algorithms have gained acceptance and popularity, and are often considered generally superior to sort-based algorithms such as merge-join. In this article, we compare the concepts behind sort- and hash-based query-processing algorithms and conclude that (1) many dualities exist between the two types of algorithms, (2) their costs differ mostly by percentages rather than by factors, (3) several special cases exist that favor one or the other choice, and (4) there is a strong reason why both hash- and sort-based algorithms should be available in a query-processing system. Our conclusions are supported by experiments performed using the Volcano query execution engine     

Processor membership in asynchronous distributed systems

Presents protocols for determining processor membership in asynchronous distributed systems that are subject to processor and communication faults. These protocols depend on the placement of a total order on broadcast messages. The types of systems for which each of these protocols is applicable are characterized by the properties of the communication mechanisms and by the availability of stable storage. In the absence of stable storage or of a mechanism for distinguishing promptly delivered messages, the authors show that no membership protocol can exist. They also discuss their experience in implementing these membership protocols     

Parallel architecture for fast transforms with trigonometric kernel

We present an unified parallel architecture for four of the most important fast orthogonal transforms with trigonometric kernel: Complex Valued Fourier (CFFT), Real Valued Fourier (RFFT), Hartley (FHT), and Cosine (FCT). Out of these, only the CFFT has a data flow coinciding with the one generated by the successive doubling method, which can be transformed on a constant geometry flow using perfect unshuffle or shuffle permutations. The other three require some type of hardware modification to guarantee the constant geometry of the successive doubling method. We have defined a generalized processing section (PS), based on a circular CORDIC rotator, for the four transforms. This PS section permits the evaluation of the CFFT and FCT transforms in n data recirculations and the RFFT and FHT transforms in n-1 data recirculations, with n being the number of stages of a transform of length N=rⁿ. Also, the efficiency of the partitioned parallel architecture is optimum because there is no cycle loss in the systolic computation of all the butterflies for each of the four transforms