The Effects of Isolation and Acid Mine Drainage on Fish and Macroinvertebrate Communities of Monday Creek, Ohio, USA

Isolated headwater streams in mined watersheds may have good water quality and fish habitat, yet be disconnected from immigration sources by stream segments impaired by acid mine drainage (AMD). Studies of fish and macroinvertebrate communities, habitat, and a number of hydrochemical parameters in Monday Creek, Ohio, show that AMD eliminates fish communities and severely limits macroinvertebrate communities in directly affected tributaries. Isolated headwaters in the heavily mined Monday Creek watershed have relatively good water quality and habitat, but poor fish communities. Comparison of isolated Monday Creek headwaters with non-isolated reaches in unmined watersheds indicates that differences in fish communities are attributable to isolation. Fish communities in isolated headwaters have lower Indices of Biotic Integrity (IBI) than comparable non-isolated communities, reduced species numbers, and lower numbers of individuals, despite suitable habitat as measured by the Qualitative Habitat Evaluation Index (QHEI). Comparison of macroinvertebrate communities shows higher Invertebrate Community Indices (ICI), and no apparent species loss, which can be attributed to the obligate flight stage in the life cycle of many macroinvertebrates, which enables them to overcome aquatic barriers. The implication of this research is that there is an opportunity for recovery of depleted fish communities in large AMD-isolated areas with good water quality, suitable habitat, and intact macroinvertebrate communities, by downstream treatment or source control of AMD to create aquatic corridors for fish immigration.     

'EUROPART'. Airborne particles in the indoor environment. A European interdisciplinary review of scientific evidence on associations between exposure to particles in buildings and health effects

The relevance of particle mass, surface area or number concentration as risk indicators for health effects in non-industrial buildings has been assessed by a European interdisciplinary group of researchers (called EUROPART) by reviewing papers identified in Medline, Toxline, and OSH. Studies dealing with dermal effects or cancer or specifically addressing environmental tobacco smoke, house dust-mite, cockroach or animal allergens, microorganisms and pesticides were excluded. A total of 70 papers were reviewed, and eight were identified for the final review: Five experimental studies involving mainly healthy subjects, two cross-sectional office studies and one longitudinal study among elderly on cardiovascular effects. From most studies, no definite conclusions could be drawn. Overall, the group concluded that there is inadequate scientific evidence that airborne, indoor particulate mass or number concentrations can be used as generally applicable risk indicators of health effects in non-industrial buildings and consequently that there is inadequate scientific evidence for establishing limit values or guidelines for particulate mass or number concentrations.     

Characterization of particulate emissions from occupant activities in offices

This paper characterizes the relationship between occupant activities and indoor air particulate levels in a non-smoking office building. Occupant activities were recorded on video. Particulate concentrations were monitored by three optical particle counters (OPCs) in five size ranges at three heights. Particulate mass concentrations were measured gravimetrically and bioaerosol concentrations were determined by impaction methods. Occupant activities and number concentrations were determined with 1-min resolution over a 1-week period. Occupant activities such as walking past or visiting the monitoring site explained 24-55% of the variation of 1- to 25-micron diameter particle number concentrations. Statistical models associating particulate concentrations with occupant activities depended on the size fraction and included an autocorrelative term. Occupant activities are estimated to contribute up to 10 micrograms m-3 in particulate concentrations per person. Number concentrations of particles smaller than 1 micron had little correlation with indoor activities other than cigarette smoking and were highly correlated with outdoor levels. The method can be used to characterize emissions from activities if rapid measurements can be made and if activities can be coded from the video record.     

Uptake of cadmium, zinc, copper, lead and chromium in the pacific oyster. Crassostrea gigas. Grown in the tamar river. Tasmania

Hundreds of oysters and mud samples from 15 sites along the Tamar River were analysed for cadmium, copper, zinc, lead and chromium. The widely accepted concept of enrichment factors of up to several hundred thousand, describing accumulation by oysters of cadmium, zinc and copper from seawater has been found to be grossly misleading. Concentrations found for these three metals in oysters were only 10–40 times the concentrations in inhabited muds. Concentrations of metals in muds may be used to indicate whether a potential oyster bed would produce oysters that were grossly contaminated. Approximately 1 ppm cadmium in mud could result in oysters containing at least 25 ppm, i.e. 4–5 ppm wet wt. Similarly. 100 ppm zinc in mud could produce oysters containing at least 4000 ppm. i.e. 800–1000 ppm wet wt. Three heavy metal accumulation processes were discernible. Copper and chromium appeared to be absorbed up to a maximum weight that was limited by the size of the oyster and was independent of the amount of metal in the mud. Lead was not absorbed through any physiological demand, but was randomly incorporated at sites containing high concentrations in the mud. Zinc and cadmium were accumulated by a process that depended primarily on the concentrations of these metals in the mud at each site. Mean dry wt concentrations of metals in oysters and mud samples ranged from: 4.2–134 ppm and 0·4 to 5·7 ppm cadmium; 200–1700 ppm and 3–224 ppm copper: 0 135 ppm and 4–1500 ppm lead: 1–37 ppm and 2–88 ppm chromium; 1700 14.000 ppm and 20–500 ppm zinc. respectively.     

An extension of ASM2d including pH calculation

This paper presents an extension of the Activated Sludge Model No. 2d (ASM2d) including a chemical model able to calculate the pH value in biological processes. The developed chemical model incorporates the complete set of chemical species affecting the pH value to ASM2d describing non-equilibrium biochemical processes. It considers the system formed by one aqueous phase, in which biochemical processes take place, and one gaseous phase, and is based on the assumptions of instantaneous chemical equilibrium under liquid phase and kinetically governed mass transport between the liquid and gas phase. The ASM2d enlargement comprises the addition of every component affecting the pH value and an ion-balance for the calculation of the pH value and the dissociation species. The significant pH variations observed in a sequencing batch reactor operated for enhanced biological phosphorus removal were used to verify the capability of the extended model for predicting the dynamics of pH jointly with concentrations of acetic acid and phosphate. A pH inhibition function for polyphosphate accumulating bacteria has also been included in the model to simulate the behaviour observed. Experimental data obtained in four different experiments (with different sludge retention time and influent phosphorus concentrations) were accurately reproduced.     

Contact flocculation-filtration of humic substances

Contact flocculation-filtration of humic dispersions with alum in medium grain (0.62 mm) sand gave short runs to breakthrough, while in coarse (1.2 mm) media clarification was inefficient. Alum with cationic polymer gave in coarse media acceptable runs, but shorter then for mineral dispersions. Analysis of results by parameters of existing filtration models showed that using the Ives-Iwasaki model and plotting filtration coefficient λ vs specific deposit σ gave different λ_max for different polymer dose, plot of λ_max vs dose goes through maximum at optimum dose.Plotting the cube root of headloss vs square root of specific deposit gave a straight line corresponding to Shektman formula.Analysis by Adin-Rebhun model showed that for contact flocculation-filtration humic dispersions attachment coefficient k₁ was similar to, detachment k₂ was many fold higher then and theoretical maximum mass capacity much lower then in case of mineral dispersions.Calculations showed that the solid content and the density of alumo-organic deposits in bed are much lower than of alumo-mineral deposits. Polymers and minerals increase the solid content, the density of deposits and the mass capacity of filter beds.     

Effect of agitation, turbidity, aluminium foil reflectors and container volume on the inactivation efficiency of batch-process solar disinfectors

We report the results of experiments designed to improve the efficacy of the solar disinfection of drinking water, inactivation process. The effects of periodic agitation, covering the rear surface of the container with aluminium foil, container volume and turbidity on the solar inactivation kinetics of Escherichia coli (starting population = 10(6) CFU ml(-1)) were investigated. It was shown that agitation promoted the release of dissolved oxygen from water with subsequent decrease in the inactivation rates of E. coli. In contrast, covering the rear surface of the solar disinfection container with aluminium foil improved the inactivation efficiency of the system. The mean decay constant for bacterial populations in foil-backed bottles was found to be a factor of 1.85 (std. dev. = 0.43) higher than that of non-foil-backed bottles. Inactivation rates decrease as turbidity increases. However, total inactivation was achievable in 300 NTU samples within 8 h exposure to strong sunshine. Inactivation kinetics was not dependent on the volume of the water container for volumes in the range 500-1500 ml.