Stability of Circular Cylindrical Shells with a Single Local Dent

The theoretical-and-experimental investigation has been performed on the stability of smooth cylindrical shells of steel with a single local dent. All the shells manufactured using the same process were tested with the fulfillment of identical conditions for observations and measurements. Theoretical calculations were carried out by the mesh method with the use of the nonlinear theory of shells. A comparison of the experimental and theoretical values of the critical loads has been made. The theoretical-and-experimental approach proposed enables one to evaluate the quality of shells by studying local dents and other specific imperfections.     

Electrosprayed and selenized Cu/In metal particle films

Nano-particulate copper and indium metal layers of 1-2 μm have been deposited by non-vacuum techniques such as doctor blade, screen printing and electrospray using alcoholic suspension pastes. Electrospray showed a high efficiency of material usage and yielded the most uniform morphology. The metal precursor layers were subjected to a thermal treatment (500-600 °C) in selenium vapor to convert the porous metal layers into CuInSe₂ compound layers. The chemical conversion, investigated by X-ray diffraction, showed the presence of the In₂O₃ impurity phase in the precursor as well as in the selenized layers.     

A XRD study of Co/Au multilayers using a laboratory microdiffractometer

In this paper we show that by the analysis of 2D images collected with a laboratory X-ray microdiffractometer it is possible to non-destructively evaluate the structure, the microstructure, and the preferred orientation of films. In particular, the structural analysis of Co/Au multilayers on Si(1 0 0) deposited at different Ar pressures are reported and discussed.     

Accuracy Investigations of Boundary Element Methods for the Solution of Laplace Equations

Boundary element methods (BEMs) are approved methods for an efficient numerical solution of problems, which are based on a Laplace equation. Here, the solution of electrostatic field problems, steady current flow field problems, and magnetostatic field problems is considered. Focus of this paper is on investigations of accuracy of direct formulations, which are based on Green's theorem. Different types of coupling of computational domains are examined with respect to accuracy and convergence behavior of iterative solvers of the linear system of equations. Furthermore, the influence of singular and nearly singular integrals and the influence of matrix compression techniques to the accuracy of the solution are observed     

Preparation and properties of heavy-metal halide glasses

We have studied the effect of In³⁺, Pb²⁺, Gd³⁺, and Cl (heavier ions) substitutions for Al³⁺, Ba²⁺, La³⁺, and F^? on the crystallization stability and UV/IR optical properties of HBLAN fluorohafnatc glasses (HfF₄-BaF₂-LaF₃-AlF₃-NaF system). We obtained stable glasses containing InF₃ and BaCl₂ instead of AlF₃ and BaF₂, respectively, and offering increased IR transmission. The presence of CCl₄ in the process atmosphere and the removal of oxygen-containing impurities via directional solidification are shown to have an advantageous effect on the optical quality of the glasses. The fluoride-chloride glasses are capable of accommodating about 1.5 times higher levels of rare-earth activators in comparison with their fluoride analogs.     

Analysis of operating conditions of ground-fault protection schemes for generator stator winding

This paper presents results of simulation studies of the influence of methods of grounding the stator winding of the unit-connected generator neutral on the operating conditions of a 100-percent ground-fault protection excited by the third-harmonic voltage ratio in the generator neutral and at its terminals. The analysis was performed for a generator with the neutral grounded through a ground-fault neutralizer, a third-harmonic stop filter, a resistor, and a capacitive voltage divider. The influence of the parameters of the particular elements of the grounding circuits on the voltage-feeding measuring element of the protection was determined. The capacitance to ground of the generator breakers was taken into account. The simulations were run for 1110-MVA unit-connected generator at ground faults along the whole length of the generator stator winding. It has been found that the method of grounding the generator neutral and the parameter of the grounding elements significantly influences the operating conditions of this protection. It is shown that through the proper selection of these parameters, the ground-fault protection of whole stator winding, counting from the generator neutral to the terminals is ensured.     

Design of a wideband microstrip antenna and the use of artificial neural networks in parameter calculation

This paper deals with the design of a multi-slot hole-coupled microstrip antenna on a substrate of 2 mm thickness that gives multi-frequency (wideband) characteristics. The Method of Moments (MoM)-based IE3D software was used to simulate the results for return loss, VSWR, the Smith chart, and the radiation patterns. A tunnel-based artificial neural network (ANN) was also developed to calculate the radiation patterns of the antenna. The radiation patterns were measured experimentally at 10.5 GHz and 12 GHz. The experimental results were in good agreement with the simulated results from IE3D and those of the artificial neural network. A new method of using a genetic algorithm (GA) in an artificial neural network is also discussed. This new method was used to calculate the resonant frequency of a single-shorting-post microstrip antenna. The resonant frequency calculated using the genetic-algorithm-coupled artificial neural network was compared with the analytical and experimental results. The results obtained were in very good agreement with the experimental results.     

Terahertz characterisation of building materials

To obtain realistic models for propagation channels in future pico-cellular indoor terahertz communication systems it is necessary to know the reflective properties of building materials found in a typical office environment. The angular dependent reflection coefficients of different building materials were determined using terahertz time-domain spectroscopy in transmission geometry and Fresnel's equations. This approach is more efficient than a set of measurements in reflection geometry for different angles. Verification of the method with a set of such reflection measurements shows an excellent agreement.     

An efficient nonlinear circuit simulation technique

This paper proposes a novel method for the analysis and simulation of integrated circuits (ICs) with the potential to greatly shorten the IC design cycle. The circuits are assumed to be subjected to input signals that have widely separated rates of variation, e.g., in communication systems, an RF carrier modulated by a low-frequency information signal. The proposed technique involves two stages. Initially, a particular order result for the circuit response is obtained using a multiresolution collocation scheme involving cubic spline wavelet decomposition. A more accurate solution is then obtained by adding another layer to the wavelet series approximation. However, the novel technique presented here enables the reuse of results acquired in the first stage to obtain the second-stage result. Therefore, vast gains in efficiency are obtained. Furthermore, a nonlinear model-order reduction technique can readily be used in both stages making the calculations even more efficient. Results will highlight the efficacy of the proposed approach