Force-clamp spectroscopy with a small dithering of AFM tip, and its application to explore the energy landscape of single avidin-biotin complex

We have recently developed a new method for directly measuring the spring constant of single molecules and molecular complexes on a real-time basis [L.A. Chtcheglova, G.T. Shubeita, S.K. Sekatskii, G. Dietler, Biophys. J. 86 (2004) 1177]. The technique combines standard force spectroscopy with a small dithering of tip. Changes in the amplitude of the oscillations are measured as a function of the pulling-off force to yield the spring constant of the complex. In this report, we present the first results of combination of this approach with the force-clamp spectroscopy. The standard atomic-force microscope has been supplemented with an electronic unit, which is capable of realizing an arbitrary force function, and permits the force-loading regime to be interrupted at any time. Using this method, the time needed to rupture a single bond can be measured as a function of the force that is required to maintain the complex in a stretched condition. The energy landscape of the avidin-biotin complex is explored and discussed.     

Thermal comfort and sensation in men wearing a cooling system controlled by skin temperature

OBJECTIVE: The study was done to determine whether thermal comfort (TC), thermal sensation (TS), and subjective factors gauging environmental stress were negatively affected with different cooling methods in men exercising in chemical protective clothing. BACKGROUND: Previous studies have reported that intermittent regional cooling improved the efficacy of cooling as compared with constant cooling (CC), but no studies have addressed whether there is any improvement in thermal comfort. METHODS: Eight male volunteers exercised at moderate work intensity (425 W) in three microclimate cooling tests. The circulating fluid in the cooling garment was provided during exercise to the head (6% body surface area [BSA]), torso (22% BSA), and thighs (44% BSA) and manipulated under three methods: (a) CC, (b) pulsed cooling (PC), and (c) PC activated by mean skin temperature (T(sk)) control (PC(skin)). TC and TS ratings were recorded every 20 min during the 80-min test. RESULTS: TC and TS ratings were not different for PC(skin) and CC; thus the participants perceived PC(skin) as being similar to CC. TS was significantly warmer with PC than with PC(skin) and CC (p < .001). In PC(skin), T(sk) was significantly higher than in PC and CC (p < .001), and PC(skin) was rated as being not as warm as PC according to TS. CONCLUSION: This indicates that the PC(skin) method was perceived as being as cool as CC and cooler than PC. APPLICATION: These findings indicate that the PC(skin) cooling method is an acceptable alternative to CC and PC based on human perceptions.     

Intermittent microclimate cooling during exercise-heat stress in US army chemical protective clothing

The effectiveness of intermittent, microclimate cooling for men who worked in US Army chemical protective clothing (modified mission-oriented protective posture level 3; MOPP 3) was examined. The hypothesis was that intermittent cooling on a 2 min on-off schedule using a liquid cooling garment (LCG) covering 72% of the body surface area would reduce heat strain comparably to constant cooling. Four male subjects completed three experiments at 30 degrees C, 30% relative humidity wearing the LCG under the MOPP 3 during 80 min of treadmill walking at 224 +/- 5 W . m(-2). Water temperature to the LCG was held constant at 21 degrees C. The experiments were; 1) constant cooling (CC); 2) intermittent cooling at 2-min intervals (IC); 3) no cooling (NC). Core temperature increased (1.6 +/- 0.2 degrees C) in NC, which was greater than IC (0.5 +/- 0.2 degrees C) and CC (0.5 +/- 0.3 degrees C) ( p < 0.05). Mean skin temperature was higher during NC (36.1 +/- 0.4 degrees C) than IC (33.7 +/- 0.6 degrees C) and CC (32.6 +/- 0.6 degrees C) and mean skin temperature was higher during IC than CC ( p < 0.05). Mean heart rate during NC (139 +/- 9 b . min(-1)) was greater than IC (110 +/- 10 b . min(-1)) and CC (107 +/- 9 b . min(-1)) ( p < 0.05). Cooling by conduction (K) during NC (94 +/- 4 W . m(-2)) was lower than IC (142 +/- 7 W . m(-2)) and CC (146 +/- 4 W . m(-2)) ( p < 0.05). These findings suggest that IC provided a favourable skin to LCG gradient for heat dissipation by conduction and reduced heat strain comparable to CC during exercise-heat stress in chemical protective clothing.     

Fluorescence methods for determination of temperature in fuel sprays

Fluorescent additives which allow the determination of droplet temperatures in hydrocarbon fuel sprays have been developed. These systems, which exploit the chemistry of organic exciplexes; should make possible the determination of droplet temperatures within 1 degree C. Two specific systems are described: 3,10-dicyanophenanthrene/diethylaniline over the 20-135 degrees C range, and naphthalene/tetramethyl-p-phenylene diamine over the 140-265 degrees C range. These additives should allow 2-D real-time nonintrusive visualization of the droplet temperatures in an evolving fuel spray.     

Observations of shadow bands at the total solar eclipse of 16 February 1980

Photoelectric observations of short term light variations (shadow bands) at the 16 Feb. 1980 total solar eclipse have been made using a set of spatially separated PIN diodes. Light variations in a bandpass of 1-500 Hz were detected during the half-minutes preceding and following the total phase. Fourier analysis of the noise spectrum of the variations reveals a sharp drop-off for frequencies above 50 Hz and an overall spectrum quite similar to previously reported power spectra of stellar scintillation. This is consistent with an atmospheric origin for the shadow bands. Cross-correlations between the detector outputs are low, suggesting a short persistence time for the turbulent elements causing the patterns.     

CONTROLLER DESIGN AND STABILITY ANALYSIS OF TIME-CONTINUOUS SYSTEMS BASED ON A FUZZY STATE MODEL

利用Lyapunov方法研究广义系统的渐近稳定性及相关的镇定问题. 得到了渐近稳定的条件及镇定方法.     

原子光刻用亚稳态氖原子束源的研究

研制了一台用于原子光刻的亚稳态氖原子束源 ,其束流强度可达 3 3× 10 14 atoms/s·Sr.。研究了束流强度的变化规律 ,并对其机理进行了探讨。     

Intense source of spin-polarized electrons

Spin angular momentum conservation in chemiionization reactions involving optically oriented He(2(3)S) atoms in a flowing helium afterglow has been exploited to yield a source of spin-polarized electrons. Either transversely or longitudinally polarized electrons can be extracted. Polarized electron beam currents of approximately 2 muA have been realized at 40% polarization. The beam has an effective emittance of approximately 2 mrad/cm over the energy range 100-400 eV, an energy spread of less, similar0.15 eV, and the polarization is readily reversible. The source is relatively inexpensive and appears suitable for the majority of low-energy spin-dependent scattering experiments proposed to date.