智能压力传感器

讨论了压阻式智能传感器的设计,并以80C31单片机为核心构成了一个能检测压力、温度的智能传感器,它能实现量程的自动变换、故障的自诊断及数据的处理,通过软件实现了对半导体传感器的零点修正、非线性修正及温度补偿。实验表明,传感器的智能化改善了传感器的性能。     

浅谈书籍装帧设计

“佛靠金装，人靠衣装”。封面设计是书籍装帧设计的重要内容。封面设计要体现书的内容、性质、色彩要考虑读书对象、文化层次，装帧设计给人以美的感觉。     

深斜井永久式封隔器两种套铣方式风险分析与优化措施

在深斜井大修作业中,为了适应海上修井机作业能力的需要,需要处理井下永久式封隔器。采用磨铣方式处理难度大、周期长、费用高,因此通常采取套铣方式,仅将可钻式永久性封隔器卡瓦及密封套铣掉,再打捞回收或下推至人工井底,直至不妨碍下一步作业。从作业井实际情况出发,针对深斜井永久式封隔器,采用了两种不同动力驱动方式进行套铣处理:一种是地面转盘驱动,井下全部钻具都处于旋转状态,全程摩阻及扭矩大,可以施加较大钻压;另一种为井下马达驱动,即只有马达以下钻具旋转,而马达以上钻具不转,从而降低摩阻,但施加钻压较小,否则容易引起马达失速,所以对马达性能要求较高。通过套铣风险对比分析,分别对两种套铣钻具与参数进行了优化,提出了套铣成功与否的判断依据,为现场应用提供了借鉴。     

石油钻机提升系统穿绳方法研究

目前国内外钻机大绳一般采用顺穿法或花穿法。分析了2种穿绳方法的受力特点,大绳顺穿时游车的受力不平衡,会发生倾斜和摆动;采用大绳花穿方法,避免了游车的倾斜和摆动,但造成大绳入轮槽的倾角大,大绳易脱槽。顺穿法一般在电动钻机上采用,主要考虑到电控操作提升系统比较平稳;花穿法一般在机械钻机上使用,以受力平衡来缓解气控操作带来的冲击载荷的影响。为了克服这2种穿绳方法的不足,提出了两行双联滑轮组顺穿法和双联滑轮组顺穿法,可以提高安全性,减少磨损。     

EMMP: a highly efficient membership management protocol

Gossip (or epidemic) algorithms have recently become popular solutions to multicast message dissemination in peer-to-peer systems. Nevertheless, it is not straightforward to apply gossip to on-demand streaming because it often fails to achieve a timely delivery. To solve this problem and taking into account the characteristic of peers randomly joining and leaving in peer-to-peer systems, an Efficient Membership Management Protocol (EMMP) has been presented. Every node only needs to keep contact with O (log(N)) nodes, and EMMP can support the reliable dissemination of messages. Considering the “distance” between peers, it causes the major data to be transmitted in a local area and reduces the backbone’s traffic, and speeds up the dissemination of messages between peers. This paper has adopted the “goodfriend” mechanism to reduce the influence on the system when a peer fails or leaves. Simulation results show that EMMP is highly efficient, and both the redundancy and the delay of the system are well solved.     

Separating inviscid flows

Summary The separating flow of an inviscid fluid is not only a limit solution of the steady separating, laminar fluid flow at high values of the Reynolds number but it is also part of its structure (Smith [1], [2]). This work aims at reexamining the separating flow of inviscid fluid past a bluff body which is fixed in an otherwise uniform stream of fluid. For the purpose of this paper we will assume that the bluff body is a circular cylinder but the theory is applicable to bodies of any shape. It is further assumed that the fluid is in steady two-dimensional motion and is inviscid and of constant density. The flow structure is assumed to consist of a separated flow region, caviting flows in which there exists a free surface on which the pressure is constant, and a wake. A twin spiral vortex model is used in order to determine the shape of the free streamline. Based on the free streamline theory the problem reduces to solving a mixed boundary value problem and a Hilbert solution for the inverse problem in the auxiliary plane is obtained. When we consider the flow in the physical plane the problem is transformed into a direct problem in which the geometry of the solid body is given in advance. We assume that the separation is smooth and thus the curvature of the free streamline at the point of free detachment be equal to that of the body surface. A numerical method for solving the two-dimensional potential flows past arbitrarily shaped curved bluff bodies is developed.When the cavitation number is zero the angle of separation is approximately 55° and the computed results predict that the position of the separation point will move backward as the cavition number increases. The relationships between the drag coefficient, and the width and length of the cavity is determined and is found to be in very good agreement with the predictions of Smith [1].     

A Novel Athermal 40-Channel DWDM Multi/Demultiplexer Based on the Combination of AWGs and Interleaver

An athermal 40-channel dense wavelength-division-multiplexing multi/demultiplexer using a novel combination technology is proposed. It consists of one 1times4 100- to 400-GHz spacing interleaver filter and four sub-arrayed-waveguide gratings (AWGs). The temperature-dependent wavelength shift of the combined device is successfully suppressed to 0.058 nm in the -20degC to 70degC temperature range. Moreover, the combined device's adjacent crosstalk (typically -35 dB) is much better than conventional AWGs (typically -25 dB).     

大朝山水电站碾压混凝土重力坝台阶式溢流面设计

大朝山水电站碾压混凝土重力坝的最大坝高为111m,设计洪水位为899m(500年一遇),此时,表孔下泄的设计流量为9992m3/s,堰顶设计单宽流量为132.7m3(/s·m)。通过多次表孔水工模型试验研究和近三年表孔泄水运行,验证了大朝山水电站碾压混凝土重力坝的表孔采用宽尾墩、台阶式溢流面和戽式消力池联合消能的设计方案是合理可行的,为全段面碾压混凝土重力坝和表孔溢流面的设计开拓了新的思路。     

China＇s Electric Power Reform：Different Economics and Challenges

China＇s electric power reform has followed the western reform format, however, it doest not seem to have endorsed the liberalization ideology underlying the reform model. This raises the concern of whether and how a competitive power market may be established and reform objectives reached. The new market competition model is easy to build in theory. The experience of many countries suggests that the market reform is extremely difficult because of the interruptions by different interest groups. To transform a centrally planned power sector into a competitive power market is a daunting task. Policy makers need to take into consideration the transitional nature of the economy and power industry as they implement the competitive power market model.