贵金属Cu、Ag、Au的电子结构和物理性质

由纯金属单原子理论(OA)确定了面心立方结构(FCC)贵金属Cu、Ag、Au的电子结构依次为[Ar](3dn)5.58(3dc)4.21(4sc)0.23(4sf)0.98、[Kr](4dn)4.87(4dc)4.56(5sc)0.66(5sf)0.91、[Xe](5dn)4.20(5dc)4.90(6sc)1.57(6sf)0.33,并确定了Cu、Ag、Au的密排六方结构(HCP)和体心立方结构(BCC)两种初态特征晶体和初态液体的电子结构。根据自然态的电子结构定性解释了熔点、拉伸强度、维氏硬度、体弹性模量、电导和热导率物理性质差异与电子结构的关系,定量计算了晶格常数、结合能、势能曲线及线热膨胀系数随温度的变化。根据非自然态的电子结构,定性解释了晶体结构BCC和HCP的关系。     

混凝土小砌块与普通砖混住宅楼造价分析

指出混凝土小型空心砌块是一种节能型的新型墙体材料。本文从经济角度对该种材料和粘土砖材料进行了实例分析、比较,得出了这种新型材料值得推广使用的结论。     

浸渗工艺对SiC/Al复合材料残余气孔率的影响

采用无压浸渗法制备了SiC/Al复合材料,从浸渗动力学和工艺方法的角度探讨了浸渗保温时间和降温方式对复合材料的残余气孔率的影响。结果表明:随着保温时间的适当延长,能有效地降低复合材料的残余气孔率;连续降温优于分段降温,有利于降低SiC/Al复合材料的残余气孔率。     

Diffusion bonding between nickel-base superalloy K24 and heat-resisting steel 1Cr11Ni2W2MoV

IntroductionSLlperalloyandheat-resistingsteelarenowwidelyusedasstructurematerialsinaerospace,a\-lationalldshipbuildingindustries.Nickel-basesuperalloywasfirstlyrevealedasanengineeringmaterialduringtheearly1960swhenitwasrecognizedasbeingsuitableforllledium-temperaturegasturbinel'l.Now.nickel-basesuperalloyhasbeenpracticallyusedinhigheffectiveturbinestosatisfytheincreasingdemandsforhighertemperatureenvironmentsIZI.Insomeaerospaceengines,theimpellersshouldserveattemperatureof1000C~1100C,andala…     

离心泵性能参数的自动测定和自动控制

通过将计算机技术应用于离心泵性能参数的研究，实现了离心泵性能参数的自动测定和自动控制。     

二层组装四磺酸酞菁铜修饰电极的制备、表征与应用

四磺酸酞菁铜在1，3-二环己基碳二亚胺（DCC）的活化下与自组装膜上的氨基发生表面化学反应，制得了二层组装半胱胺．四磺酸酞菁铜／金电极，将四磺酸酞菁铜固定在金电极表面。利用循环伏安、扫描电镜进行了组装电极的表征。这种二层组装的电极对半胱胺酸具有催化作用。     

Preparation of Protein-Stabilized β-Carotene Nanodispersions by Emulsification–Evaporation Method

This work was initiated to prepare protein-stabilized β-carotene nanodispersions using emulsification–evaporation. A pre-mix of the aqueous phase composed of a protein and hexane containing β-carotene was subjected to high-pressure homogenization using a microfluidizer. Hexane in the resulting emulsion was evaporated under reduced pressures, causing crystallization and precipitation of β-carotene inside the droplets and formation of β-carotene nanoparticles. Sodium caseinate (SC) was the most effective emulsifier among selected proteins in preparing the nanodispersion, with a monomodal β-carotene particle-size distribution and a 17-nm mean particle size. The results were confirmed by transmission-electron microscopy analysis. SC-stabilized nanodispersion also had considerably high ζ-potential (−27 mV at pH 7), suggesting that the nanodispersion was stable against particle aggregation. Increasing the SC concentration decreased the mean particle size and improved the polydispersity of the nanodispersions. Nanodispersions prepared with higher β-carotene concentrations and higher organic-phase ratios resulted in larger β-carotene particles. Although increased microfluidization pressure did not decrease particle size, it did improve the polydispersity of the nanodispersions. Repeating the microfluidization process at 140 MPa caused the nanodispersions to become polydisperse, indicating the loss of emulsifying capacity of SC due to protein denaturation.     

钛合金叶片隔热烘漆的研制

以双酚A型环氧树脂为主要成膜物质,以氮化硼为功能填料,以丁醇醚化脲醛树脂为固化剂,并添加己二酸聚酯弹性体树脂改善其柔韧性、提高涂膜的机械性能,最终得到附着力强、耐热性好、隔热作用明显的飞机发动机叶片用防护涂料.     

A rheological model for iron oxide suspensions

We have examined the rheological properties of a Co-adsorbed γ-Fe₂O₃ magnetic suspension with polyurethane (PU) as a binder and methyl ethyl ketone (MEK) or cyclohexanone (CH) as a solvent. A Haake RV20 viscometer was used to measure the suspension viscosity and the vane method was adopted to determine the fluid yield stress. A rheological model which can be viewed as a combination of the Casson model and the Bingham model is proposed to describe the suspension viscosity. The effects of temperature, particle content, and binder concentration are included in the model.     

Packed bed electrodes. I. The electrochemical extraction of copper ions from dilute aqueous solutions

A study has been made of the cathodic deposition of copper ions from flowing dilute aqueous solutions onto a packed bed of graphite. The electrodeposition reaction is mass transfer controlled and expressions are presented for the cathodic current as a function of time, solution flow rate and bed characteristics. These have been verified from potentiostatic experiments. The cathode current efficiency is shown to approach 100% and packed bed electrodes are shown to be an effective means of extracting or removing metal ions from dilute solutions.