New polyimide–silica organic–inorganic hybrids

A series of polyimide–silica hybrid films with silica contents up to 30 wt % were successfully prepared by the sol‐gel reaction of tetraethoxysiliane in the presence of poly(amic acid) containing pendent hydroxyl groups. The films were yellow and transparent when the silica content was less than 11 wt %. The chemical structure of the films was characterized by Fourier transform infrared spectroscopy, and the morphology of the films was investigated by scanning electronic microscopy and atomic force microscopy. Thermogravimetric analysis, differential scanning calorimetry, and stress–strain tests were used to measure the performance of the films. The results indicate that the glass‐transition temperatures and decomposition temperatures of the hybrid films increased with increasing silica content, whereas the tensile strength had a maximum with the variety of silica contents. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2210–2214, 2003     

Seeded Crystallization of Leucite

The leucite crystallization kinetics from a hydrothermally derived precursor seeded with nano-crystalline leucite was investigated by X-ray diffraction and non-isothermal differential thermal analysis. The nano-crystalline leucite was prepared by high-energy milling of high-purity leucite powder and the leucite precursor was prepared by the hydrothermal method of silica sol, aluminum nitrate, and potassium nitrate. After the seeds were introduced, the crystallization temperature of the precursor was lowered by 100°C and the transition phase kalsilite did not appear during the crystallization process. When the seeded precursor was heat treated at 700°C, a small amount of cubic leucite was stabilized to room temperature. The seeded precursor showed an exothermic peak between 800° and 920°C under different heating rates. The activation energy for the growth of leucite from the seeded precursor was 256(SD9) kJ/mol.     

Decolorisation and mineralisation of CI Reactive Black 8 by the Fenton and ultrasound/Fenton methods

The effects of pH, ferrous ion and hydrogen peroxide dosage on the decolorisation and mineralisation of CI Reactive Black 8 by the Fenton process with/without ultrasonic irradiation were investigated. It was verified that the presence of ultrasonic irradiation did not enhance the decolorisation of CI Reactive Black 8 significantly by Fenton's reagents, but it enhanced the chemical oxygen demand removal efficiency. The enhancement was more pronounced for lower (<0.89 mm) or higher (>1.78 mm) ferrous ion dosage. The optimal pH for chemical oxygen demand removal was 3.0. Chemical oxygen demand removal efficiency increased with the increasing H₂O₂ dosage and reached the highest level at 5.88 mm, but further increase in H₂O₂ dosage would not increase removal efficiency significantly.     

药用中间体苯丙酮含量的气相色谱/质谱分析

苯丙酮是合成利胆药苯丙醇的重要中间体。本文建立了用气相色谱 /质谱法 (GC/MS)测定苯丙酮含量的方法。组分的定性依靠GC/MS联用技术和NIST谱库标准质谱图对照分析。以苯乙酮为内标 ,苯丙酮含量在 1.0× 10 -5～ 2 .0× 10 -4g/mL范围内呈线性 ,线性相关系数r =0 .994 9,苯丙酮最低检测浓度为 1.0× 10 -8g/mL。该法操作简便、快速 ,结果准确可靠 ,且具有很好的实用价值     

波节式换热管压缩失稳试验研究

通过对不同材料、直径和壁厚的波节式换热管进行压缩失稳试验,绘出应力和应变强度关系曲线,指出直光管经胀管成型为波节管后,应力状态分布明显不同于光管,壁厚和直径等规格尺寸的不同会影响波纹管的强度性能.     

黄荆提取物对几种害虫的杀虫活性

研究了黄荆种子二氯甲烷提取物对5种害虫的杀虫活性以及对天敌异色瓢虫的安全性。结果表明：黄荆提取物对菜青虫、小菜蛾、麦长管蚜和桃蚜都有较高的杀虫活性，尤其是对菜青虫的活性最高，稀释100倍，处理4龄幼虫死亡率可达93．3％。但对大猿叶甲的杀虫活性则很低。黄荆提取物对异色瓢虫幼虫有一定的杀虫活性，但对其成虫无任何影响。本研究结果为开发利用这一新的杀虫植物资源提供了依据。     

多CPU控制器在大功率整流控制系统中的应用

介绍了利用多CPU来设计整流控制器，解决大功率整流装置产生的磁场对整流计算机控制系统产生的干扰。     

活性污泥法处理污水两个重要参数的理论探讨

负荷、泥龄是活性污泥法处理城市污水设计、运行中的重要参数.给出了有机负荷的动力学表达形式(称之为动力学负荷),并对有机负荷和泥龄的关系,有机负荷和泥龄对水质、污泥沉降性能影响进行了理论探讨.     

改性膨润土对甲基橙的吸附

在用Cu^2 A‘^3 Fe^3 对膨润土改性中，Fe^3 改性的膨润土对甲基橙的吸附性能最好，在振荡20分钟后即可达到吸附平衡。pH=3～7、用量为3g／L、25℃时对甲基橙的吸附量达到最大，在pH=7及常温条件下，铁基膨润土的用量为11g／L时，对浓度为250mg／L甲基橙的吸附量和去除率分别为22.2mg／g98．6％；对浓度为40mg／L的甲基橙去除率达97.1％。     

乳液聚合中单体醋酸乙烯酯与保护胶体聚乙烯醇的接枝反应研究

研究了以聚乙烯醇为保护胶体的醋酸乙烯乳液聚合中,聚乙烯醇与单体的接枝反应。探讨了引发剂用量、聚合反应温度、保护胶体聚合度等因素对接枝反应的影响。