Assessing the economic impact of a low-cost water-saving irrigation technology in Indian Punjab: the tensiometer

ABSTRACT

This article assesses the impact of the tensiometer on the consumption of groundwater and electric power in paddy cultivation in Indian Punjab, and its subsequent economic benefits. We find that compared to the continuous flooding method, the tensiometer-based application of irrigation reduces water and power consumption by 13%, cutting variable costs by 7% without any yield penalty. If 30% of the paddy area is irrigated following tensiometer-based schedules, then the state could save a total of 0.67 million ha m of water and 1516 million kWh of electric power in 2010–2025, with aggregate economic benefits of US$ 459 million.     

Nano-Underfills for High-Reliability Applications in Extreme Environments

Silica particles are used as a filler material in electronic underfills to reduce coefficient of thermal expansion of the underfill-epoxy matrix. In traditional underfills, the size of silica particles is in the micrometer range. Reduction in particle sizes into the nanometer range has the potential of attaining higher volume fraction particle loading in the underfills and greater control over underfill properties for higher reliability applications. Presently, no-flow underfills have very low or no filler content because micron-size filler particles hinder solder joint formation. Nano-silica underfills have the potential of attaining higher filler loading in no-flow underfills without hindering solder interconnect formation. In this paper, property prediction models based on representative volume element (RVE) and modified random spatial adsortion have been developed. The models can be used for development of nano-silica underfills with desirable thermo-mechanical properties. Temperature dependent thermo-mechanical properties of nano-underfills have been evaluated and correlated with models in a temperature range of -175degC to 150degC. Properties investigated include, temperature dependent stress-strain, creep and stress relaxation behavior. Nano-underfills on 63Sn37Pb eutectic and 95.5Sn3.5Ag1.0Cu leadfree flip-chip devices have been subjected to thermal shock tests in the range of -55degC to 125degC and -55degC to 150degC, respectively. The trade-offs between using nano-fillers instead of micron-fillers on thermo-mechanical properties and reliability has been benchmarked.     

System Design Issues for Harsh Environment Electronics Employing Metal-Backed Laminate Substrates

Designing harsh environment electronics continue to increase in difficulty to a rapid increase in feature content while electronics packaging technologies are often providing less reliability. In addition, restricted under-the-hood airflow and integrated (mechatronic) designs are significantly increasing operating temperatures toward their maximum operating capability. To provide a cost effective design, automotive electronics designers are pursuing circuit board assemblies directly attached to a metal plate. For cost purposes, this metal plate can also be used as part of the module housing to provide protection, as well as thermal efficiency. Unfortunately, the metal backing can often further reduce component reliability due to increases in substrate coefficient of thermal expansion. The paper investigates the impact of metal attachment on component reliability as it investigates the use of several board attachment options. These analyses are compared to finite element modeling to further understand the causes of earlier failure. In addition, the impact of additional component encapsulants and conformal coatings are investigated. Because all attachment materials must meet a certain thermal performance (both initial design and long-term performance) the thermal efficiencies of these design options are investigated, as well as the delamination due to product life. Finally, failure analyses are presented and ensure that failures match expected characteristics.     

Sequence-directed base mispairing in human oncogenes

The most frequently observed mutations in ras oncogenes in solid human tumors are GC-->AT transitions at the 3' G residue of the GG doublet in codon 12 of these oncogenes. We had shown previously that mutagenesis by thymidine occurred with the same sequence specificity in mammalian cells, in that mutagenesis occurred preferentially at the 3' G of GG doublets. In this study, in vitro DNA synthesis experiments were carried out to assess the effect of local DNA sequence on base mispairing in order to determine the mechanism of sequence-directed mutagenesis by thymidine and its possible relationship to activating point mutations in N-, Ki- and Ha-ras oncogenes in solid human tumors. To avoid complicating the interpretation of the results because of the occurrence of mismatch repair as well as base misincorporation, the experiments were carried out in a repair-free environment with exonuclease-free Klenow polymerase. The results of these experiments showed that misincorporation of deoxyribosylthymine (dT) occurred with several-fold-greater efficiency opposite the 3' G compared to the 5' G of the GG doublet in codon 12 of human ras oncogenes. These results further demonstrated that the relative difference in the extent of dT misincorporation opposite the 3' G and the 5' G of GG doublets in codon 12 in the various ras oncogenes was affected by the base immediately upstream of the doublet. Within the GG doublet, it was seen that the 5' G and 3' G residues had an effect on the extent of dT misincorporation opposite each other. The 5' G was shown to have a stimulatory effect on dT misincorporation opposite the 3' G, while the 3' G was shown to have an inhibitory effect on dT misincorporation opposite the 5' G. Presumably, these mutual interactions within GG doublets are additive, such that the large differential in dT misincorporation observed between the 3' G and 5' G residues in GG doublets is the end result of the combined stimulatory and inhibitory effects within these doublets. Since the observed pattern of dT misincorporation within GG doublets corresponds to the most frequent mode of activation of ras oncogenes in solid human tumors, the results of these experiments suggest that sequence-directed dT misincorporation may be involved in the pattern of activation of human ras oncogenes, by causing GC-->AT transitions preferentially at the 3' G of the GG doublet in codon 12 of these oncogenes.     

The deformation of silicon at high temperatures and strain rates

Polycrystalline and 〈100〉 single crystalline semiconductor grade silicon samples have been subjected to uniaxial compression at strain rates from 10⁻⁵ to 12 s⁻¹ at temperatures ranging from 1100 to 1380 °C. Both intrinsic and p-type polycrystalline material and p-type single crystalline material were tested. Except at the highest temperature and lowest strain rate, no steady state deformation was observed for the polycrystalline material. In all other cases strain hardening was observed which increased with increasing strain rates. The polycrystalline material could be compressed by as much as 50 pct at 1380 °C and a strain rate of 7 s⁻¹ without cracking. An axial stress of approximately 170 MPa produces a strain rate of 5 s⁻¹ at 1380 °C. The stress necessary to produce a given strain rate increases rapidly with decreasing temperature while the ductility rapidly decreases. A preliminary forming limit diagram has also been determined for the polycrystalline material at 1380 °C. The deformation rate-controlling process in the polycrystalline material at high stresses could be the production of vacancies on jogged dislocations. Formerly with the Department of Materials Science and Engineering, University of Pennsylvania     

Solder Joint Reliability in Electronics Under Shock and Vibration Using Explicit Finite-Element Submodeling

Modeling approaches for first-level solder interconnects in shock and drop of electronics assemblies have been developed without any assumptions of geometric symmetry or loading symmetry. The problem involves multiple scales from macroscale transient-dynamics of electronic assembly to microstructural damage history of interconnects. Previous modeling approaches include, solid-to-solid submodeling using a half test PCB board, shell-to-solid submodeling technique using a quarter-symmetry model. Inclusion of model symmetry in state-of-the-art models saves computational time but targets primarily symmetric mode shapes. The modeling approach proposed in this paper enables prediction of both symmetric and antisymmetric modes, which may dominate an actual drop-event. Approaches investigated include smeared property models, Timoshenko-beam element models, explicit submodels, and continuum-shell models. Transient dynamic behavior of the board assemblies in free and JEDEC drop has been measured using high-speed strain and displacement measurements. Model predictions have been correlated with experimental data     

Modeling and Optimization of Transmission Schemes in Energy-Constrained Wireless Sensor Networks

We consider a wireless sensor network with energy constraints. We model the energy consumption in the transmitter circuit along with that for data transmission. We model the bottom three layers of the traditional networking stack - the link layer, the medium access control (MAC) layer, and the routing layer. Using these models, we consider the optimization of transmission schemes to maximize the network lifetime. We first consider the optimization of a single layer at a time, while keeping the other layers fixed. We make certain simplifying assumptions to decouple the layers and formulate optimization problems to compute a strategy that maximizes the network lifetime. We then extend this approach to cross-layer optimization of time division multiple access (TDMA) wireless sensor networks. In this case, we construct optimization problems to compute the optimal transmission schemes to an arbitrary degree of accuracy and efficiently. We then consider networks with interference, and propose methods to compute approximate solutions to the resulting optimization problems. We give numerical examples that illustrate the computational approaches as well as the benefits of cross-layer design in wireless sensor networks.     

Asynchronous hybrid systems with jumps – analysis and synthesis methods

In this paper we show that the H_∞ synthesis problem for a class of linear systems with asynchronous jumps can be reduced to a purely discrete-time synthesis problem. The system class considered includes continuous-time systems with discrete jumps, or discontinuities, in the state. New techniques are developed for the analysis of asynchronous time-varying hybrid systems which allow a particularly simple treatment, and provide an elementary proof for the sampled-data H_∞ problem.     

Influence of dietary protein level and source on the course of protein digestion along the small intestine of the veal calf

The objective of this study was to examine the effect of the dietary crude protein (CP) content and source on the distribution of digesta proteins and peptides according to their molecular mass along the small intestine of veal calves. Diets contained 14, 104, 205, and 279 g/kg of CP supplied by skim milk powder (SMP) in experiment 1. Diets contained only SMP or SMP plus proteins (1:1 on digestible CP basis) from either a soybean protein concentrate (SPC), an isolated soy protein partially hydrolyzed (HSPI), or a potato protein concentrate (PPC) in experiment 2. Duodenal, jejunal, and ileal digesta were collected from calves fitted with simple cannulae and continuously infused the milk replacers into the abomasum. The distribution of molecular mass (Mr) of proteins and peptides was studied by gel filtration chromatography. Increasing the dietary CP level of milk replacers increased the flow of oligopeptides and free amino acids in ileal digesta. Incorporating plant protein increased the flow of proteins with Mr > 20,000 in the duodenum and that of proteins and peptides with Mr < 10,000 in the ileum. Hydrolysis of oligopeptides and absorption may be a limiting step in the digestion of plant protein in the veal calf.