Use of postconsumer polyethylene in blends with polyamide 6: Effects of the extrusion method and the compatibilizer

Blends of polyamide and high‐density polyethylene show adequate properties for a large range of applications: they are used for the production of filaments, containers, and molding resins. The effect of the addition of 2 wt % of a compatibilizer, maleic anhydride grafted polyethylene, to the blend was studied and compared to the use of postconsumer polyethylene. The samples were extruded with single‐ and twin‐screw extruders with 25, 50, or 75 wt % f polyethylene, and the test specimens, molded by injection, were characterized by stress–strain tests, thermal properties, and morphologies. Processing the blends with postconsumer polyethylene in both extruders improved the mechanical properties in comparison to the blends processed with high‐density polyethylene and the compatibilizer. The morphologies of these blends showed that there was a decrease in the domain size of the disperse phase with the use of the compatibilizer or postconsumer polyethylene. The results indicate that for this blend, postconsumer polyethylene substituted, with advantages, for the necessity of a compatibilizer and the use of the high‐density polyethylene. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008.     

Investigation of the thermal, mechanical, and fracture properties of alumina-epoxy composites

A combination of dynamic shear rheology, thermomechanical analysis (TMA), scanning electron microscopy (SEM), Near-Edge X-ray Absorption Fine Structure (NEXAFS), and fracture toughness testing was utilized to characterize the thermal, mechanical, chemical, and fracture properties of alumina (α-Al₂O₃)-filled epoxy resins as a function of average filler size, size distribution, particle shape, loading, and epoxy crosslink density. In general the cured properties of the filled composites were robust. Small changes in particle size, shape, and size distribution had little impact on the final properties. Resin crosslink density and filler loading were the most critical variables, causing changes in all properties. However, most applications could likely tolerate small changes in these variables also. SEM and NEXAFS characterization of the fracture surfaces revealed that the fracture occurs at the filler interface and the interfacial epoxy composition is similar to the bulk resin, indicating a weak epoxy-alumina interaction. These results are critical for implementation of particulate-filled polymer composites in practical applications because relaxed material specifications and handling procedures can be incorporated in production environments to improve efficiency.     

Hybrid finite-element method for discretising cylindrically symmetric parts in electrotechnical models

In many technical devices such as transformers and electrical machines, large differences in geometric dimensions are observed. As a consequence, the generation of a 3D computational grid for the whole device leads to unacceptably large numbers of elements or can even fail. In addition to the commonly applied cartesian or cylindrical symmetries of the overall geometry, the model can be subdivided into parts featuring translational or cylindrical symmetries. Such parts are discretised separately, accounting for the local symmetry, and are then combined with the surrounding 3D model. Excitations and boundary conditions of the submodels are not necessarily symmetric but are expected to be smooth in the direction of the symmetry. Then, the field distribution at the interface is well approximated by a set of spectral elements along the dimension of symmetry. Coupling between the model parts is carried out by means of Lagrange multipliers. A single-phase transformer with thin insulation sheets is taken as an example to illustrate the proposed hybrid discretisation. The cross-section of the cylindrically symmetric part containing thin sheets, is represented by a fine 2D finite-element mesh so that all the geometrical details can be resolved, and the rest of the structure is discretised by a 3D mesh. Nevertheless, a fully 3D field distribution is calculated in all model parts. Only a small number of harmonic functions is needed to account for the azimuthal field variation at the cylindrical interface. Hence, the number of unknowns in the numerical model is reduced significantly, while a high level of accuracy is maintained     

Neutron Reflectometry Characterization of Interface Width between Sol-Gel Titanium Dioxide and Silicon Dioxide Thin Films

Neutron reflectometry (NR) was used to directly measure the interface width between a titanium dioxide and a silicon dioxide film deposited by sol-gel processing. In a bilayer heated to 450°C, NR measurements showed that the interface width is 0.8 nm. This width is the same as the roughness of a sol-gel silicon dioxide surface after the same heat treatment, suggesting no interdiffusion or mixing at the bilayer interface.     

Efficacy and tolerability of brodimoprim in otitis

We managed four cases of lymphorrhea after extraperitoneal pelvic lymphadenectomy by means of minocycline instillation into the cavity around the drainage tube. Two patients had concomitantly undergone cystectomy and one prostatectomy via the extraperitoneal approach. In all four cases, the lymphorrhea markedly subsided, which dramatically shortened the duration of drainage. No side effects occurred. These findings indicate that minocycline instillation is an efficacious treatment for lymphorrhea.     

Practical accuracy analysis of some existing effective channellength and series resistance extraction methods for MOSFET's

A method to analyze the accuracy of the extracted values for the channel length (L_eff) and series resistance (R_s) of MOSFET devices is presented. The analysis is based on a statistical argument being the variance σ of the extracted results. This variance is found to be a good measure for the accuracy of the particular extraction method used. It is shown that, in the case of deep submicron technologies, errors as large as 200 nm for ΔL can be made for these extraction methods depending on the process design and the process control. The use of a single transistor method is suggested as a possible solution to the low accuracy of the L-array methods     

Stability, in-Vitro and in-Vivo Release Studies from Metronidazole Ointments

The influence of ointment formulation on the stability, the in-vitro release and the in-vivo absorption through the skin of rabbits was investigated. The choice of the selected ointments has no influence on the drug stability with the exception of an acidified emulsion base. A good correlation between in-vitro release and in-vivo absorption was found revealing that metronidazole was quickly released and effectively absorbed from a polyethylene glycol base.     

Preparation of V/ZrO2 catalysts by the sol-gel method: Physical and structural characterization

Some zirconia-supported vanadium oxides have been prepared by sol-gel method and characterized by different techniques. The vanadium content exerts an effect on the area and pore-size of precursors and samples calcined. The presence of vanadium also affects the decomposition of precursors into ZrO₂ and to its phase transformation, as well as the formation of fibres, as shown by SEM-EDX. XPS analyses show the presence of two species of vanadium at the surface, V^5– and V⁴⁺, the percentage of each one depending on the load of vanadium in the catalyst.     

Study on phase behavior–impact strength relationship of unsaturated polyester/polyurethane hybrid polymer network

The phase behavior of a hybrid polymer network (HPN) composed of poly[(propylene glycol maleate)-co-(propylene glycol phthalate)] crosslinked with styrene and polyester–urethane crosslinked with methylene-bis-ortho-chloroaniline was examined. The correlation between phase separation and impact strength of the HPNs is discussed. The composition of HPNs has an effect on their properties.