Retrofit of RC hollow piers with CFRP sheets

Hollow bridge piers, particularly those built before the seventies, often have insufficient shear capacity due to inadequate transverse reinforcement details. Therefore, special attention must be given to this very important aspect when reinforced concrete (RC) piers with hollow sections are analysed and retrofitted. This paper covers the experimental analysis of retrofit solutions using CFRP sheets along the piers’ entire height to prevent shear failure. Experimental cyclic tests were carried out to evaluate the shear retrofit strategy efficiency on a set of RC piers with square hollow sections. This work also covers the study of design procedures for CFRP shear retrofitting and the evaluation of the associated ductility capacity improvement. The various transverse reinforcement detailing scenarios were assessed to determine their shear-failure prevention efficiency. The corresponding cyclic response behavior was also evaluated. The most relevant experimental information is presented in the paper, such as the evolution of the outer damage pattern. Finally, shear retrofit solutions, with a 40% increase over the maximum flexural force, show that this strategy is adequate to allow satisfactory ductility behavior.     

In vitro evaluation of S-(+)-ibuprofen as drug candidate for intra-articular drug delivery system

Intra-articular drug delivery systems (DDSs) are envisaged as interesting alternative to locally release non-steroidal anti-inflammatory drugs (NSAIDs) such as ibuprofen to reduce pain in patients with osteoarthritis. The present study examines the efficacy of S-(+)-ibuprofen on cartilage degradation as drug candidate for DDS loading. Humeral cartilage and joint capsule explants were collected from healthy sheep shoulder joints and they were cultured in mono- or in co-culture for 13?days with LPS in combination with S-(+)-ibuprofen at 50?µM and 1?mM. S-(+)-ibuprofen (50?µM) blocked prostaglandins production in LPS-activated explants but did not reduce cartilage degradation. By contrast, 1?mM S-(+)-ibuprofen treatment of cartilage explants reduced nitric oxide synthesis by 51% (p?=?0.0072), proteoglycans degradation by 35% (p?=?0.0114) and expression of serum amyloid protein – the main protein induced upon LPS challenge – by 44% (p?相似文献   

Interplay between Selenium,Selenoproteins and HIV-1 Replication in Human CD4 T-Lymphocytes

The infection of CD4 T-lymphocytes with human immunodeficiency virus (HIV), the etiological agent of acquired immunodeficiency syndrome (AIDS), disrupts cellular homeostasis, increases oxidative stress and interferes with micronutrient metabolism. Viral replication simultaneously increases the demand for micronutrients and causes their loss, as for selenium (Se). In HIV-infected patients, selenium deficiency was associated with a lower CD4 T-cell count and a shorter life expectancy. Selenium has an important role in antioxidant defense, redox signaling and redox homeostasis, and most of these biological activities are mediated by its incorporation in an essential family of redox enzymes, namely the selenoproteins. Here, we have investigated how selenium and selenoproteins interplay with HIV infection in different cellular models of human CD4 T lymphocytes derived from established cell lines (Jurkat and SupT1) and isolated primary CD4 T cells. First, we characterized the expression of the selenoproteome in various human T-cell models and found it tightly regulated by the selenium level of the culture media, which was in agreement with reports from non-immune cells. Then, we showed that selenium had no significant effect on HIV-1 protein production nor on infectivity, but slightly reduced the percentage of infected cells in a Jurkat cell line and isolated primary CD4 T cells. Finally, in response to HIV-1 infection, the selenoproteome was slightly altered.     

Sintering and conductivity of BaCe0.9Y0.1O2.95 synthesized by the sol-gel method

Ceramic powders of BaCe_0.9Y_0.1O_2.95 (BCY10) have been prepared by the sol-gel method. Barium and yttrium acetate and cerium nitrate were used as ceramic precursors in a water solution. The reaction process studied by DTA-TG and XRD showed that calcination of the precursor powder at T ≥ 1000 °C produces a single perovskite phase. The densification behaviour of green compacts studied by constant heating rate dilatometry revealed that the shrinkage rate was maximal at 1430 °C. Sintered densities higher than 95% of the theoretical one were thus obtained below 1500 °C. The bulk and additional blocking effects were characterized by impedance spectroscopy in wet atmosphere between 150 and 600 °C. A proton conduction behaviour was clearly identified. The blocking effect can be related to a space-charge depletion layer of protons in the vicinity of grain boundaries.     

Quantification of Se-Methylselenocysteine and Its γ-Glutamyl Derivative from Naturally Se-Enriched Green Bean (Phaseolus vulgaris vulgaris) After HPLC-ESI-TOF-MS and Orbitrap MS n -Based Identification

Orthogonal liquid chromatographic (ion exchange, reversed phase, and ion pairing) and mass spectrometric [electrospray ionization (ESI)-TOF-MS, ESI-Orbitrap MS, and inductively coupled plasma mass spectrometry (ICP-MS)] methods were addressed to identify and quantify selenium species from a naturally Se-enriched green bean (Phaseolus vulgaris vulgaris) sample after proteolytic digestion. While selenomethionine (10.1 mg/kg as Se) and selenate (9.5 mg/kg as Se) could be quantified in a straightforward way by anion exchange LC-ICP-MS technique, a multistep purification protocol was required to identify Se-methylselenocysteine and γ-glutamyl-Se-methylselenocysteine in an unambiguous way prior to quantification by using either in-source fragmentation (LC-ESI-TOF-MS) or collision-induced dissociation (LC-ESI-Orbitrap MS). Finally, Se-methylselenocysteine (2.6 mg/kg as Se) and γ-glutamyl-Se-methylselenocysteine (1.2 mg/kg as Se) could contribute to the overall selenium recovery of 72 %. This sample is the first of the Faboideae subfamily and Phaseolus ssp. to be speciated to such an extent for selenium including γ-glutamyl-Se-methylselenocysteine, a highly potential selenium species, which makes this bean material an ideal candidate for functional food purposes.     

On the existence and origin of sluggish diffusion in chemically disordered concentrated alloys

Concentrated single phase solid solutions, including medium- and high-entropy alloys, represent a new class of materials that have recently attracted significant interest due to exceptional functional and structural properties. Their fascinating properties are mainly attributed to the sluggish atomic-level diffusion and transport, but its controlling mechanisms are largely unknown and there is certain skepticism about its very existence. By using microsecond-scale molecular dynamics, on-the-fly and conventional kinetic Monte Carlo, we reveal the governing role of percolation effects and composition dependence of the vacancy migration energy in diffusion. Surprisingly, an increase of concentration of faster species (Fe) in face-centered cubic Ni-Fe alloy may decrease the overall atomic diffusion. Consequently, the composition dependence of tracer diffusion coefficient has a minimum near the site percolation threshold, ～20?at.%Fe. We argue that this coupled percolation and composition-dependent barriers for vacancy jumps within different subsystems in medium- and high-entropy alloys leads, indeed, to the sluggish diffusion. A fast method for preselecting materials with potentially desired properties is suggested.     

Electrodes based on nano-tree-like vanadium nitride and carbon nanotubes for micro-supercapacitors

Vanadium nitride(VN) was deposited by DC-sputtering on a vertically aligned carbon nanotube(CNTs)template for the purpose of nano-structuration. This led to the fabrication of hierarchically composite electrodes consisting of porous and nanostructured VN grown on vertically aligned CNTs in a nano-treelike configuration for micro-supercapacitor application. The electrodes show excellent performance with an areal capacitance as high as 37.5 m F cm~(-2) at a scan rate of 2 mV s~(-1) in a 0.5 MK_2SO_4 mild electrolyte solution. Furthermore, the capacitance decay was only 15% after 20,000 consecutive cycles. Moreover,the capacitance was found to increase with VN deposit thickness. The X-ray photoelectron spectroscopy analyses of the electrodes before and after cycling suggest that the oxide layers that form at the VN surface is the responsible for the redox energy storage in this material. Such electrodes can compete with other transition metal nitride based electrodes for micro-supercapacitors.