Preparation and characterization of syndiotactic polystyrene/ethylene‐propylene copolymer blends

The reactive compatibilization of syndiotactic polystyrene (sPS)/oxazoline‐styrene copolymer (RPS)/maleic anhydride grafted ethylene‐propylene copolymer (EPR‐MA) blends is investigated in this study. First, the miscibility of sPS/RPS blends is examined by thermal analysis. The cold crystallization peak (T_cc) moved toward higher temperature with increased PRS, and, concerning enthalpy relaxation behaviors, only a single enthalpy relation peak was found in all aged samples. These results indicate that the sPS/RPS blend is miscible along the various compositions and RPS can be used in the reactive compatibilization of sPS/RPS/EPR‐MA blends. The reactive compatibilized sPS/RPS/EPR‐MA blends showed finer morphology than sPS/EPR‐MA physical blends and higher storage modulus (G') and complex viscosity (η*) when RPS contents were increased. Moreover, the impact strength of sPS/RPS/EPR‐MA increased significantly compared to sPS/EPR‐MA blend, and SEM micrographs after impact testing show that the sPS/RPS/EPR‐MA blend has better adhesion between the sPS matrix and the dispersed EPR‐MA phase. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2084–2091, 2002     

Electrodeposition of polypyrrole on aluminium in aqueous tartaric solution

The electrosynthesis of polypyrrole (PPy) has been achieved on aluminium in aqueous medium of tartaric acid by means of cyclic voltammetry, potentiostatic and galvanostatic techniques. Scanning electron microscopy (SEM) and X-ray microanalysis by energy spectroscopy dispersion (EDS) applying on surfaces show that the PPy coating is developed from the metal surface through the cracks of the initial Al₂O₃ layer.A mechanism involving the participation of the supporting electrolyte and the pyrrole (Py) in distinct active sites was proposed based on the linear sweep voltammetry. It is observed for all applied electrochemical techniques that the pyrrole concentration has to be higher than 0.1 M to allow the polypyrrole electrodeposition in acid medium.Scanning electron microscopy, secondary electrons (SE) and backscattering electrons (BE), shows that the PPy coating obtained in galvanostatic and potentiostatic modes starts with small islands at weak applied potentials or current densities. Moreover, EDS reveals a good homogeneity and compactness of the film achieved in galvanostatic method. The corrosion results in 3% NaCl medium show that the PPy coating decreases the corrosion behaviour of the aluminium. The bilayer Al₂O₃/PPy shows a capacitor with future applications.     

A visual study on flame behavior in tone-excited non-premixed jet flames

A visualization study on the effect of forcing amplitude in tone-excited jet diffusion flames has been conducted. Visualization techniques are employed using optical schemes, which are a light scattering photography. Flame stability curve is attained according to Reynolds number and forcing amplitude at a fuel tube resonant frequency. Flame behavior is globally grouped into two from attached flame to blown-out flame according to forcing amplitude; one sticks the tradition flame behavior which has been observed in general jet diffusion flames and the other shows a variety of flame modes such as the flame of a feeble forcing amplitude where traditionally well-organized vortex motion evolves, a fat flame, an elongated flame, and an in-burning flame. Particular attention is focused on an elongation flame, which is associated with a turnabout phenomenon of vortex motion, and on a reversal of the direction of vortex roll-up. It is found that the flame length with forcing amplitude is the direct outcome of the evolution process of the formed inner flow structure. Especially the negative part of the acoustic cycle under the influence of a strong positive pressure gradient causes the shapes of the fuel stem and fuel branch part and even the direction of vortex roll-up to dramatically change.     

Activities of MFI-Supported Rhenium Catalysts for the Aromatization of Methane: Effect of Cationic Form of the Inorganic Carrier

MFI type inorganic carrier was used in two different cationic forms, hydrogen and calcium respectively. MFI-supported molybdenum and rhenium catalysts were prepared. The activities of the catalysts were compared for the aromatization reaction of methane. Higher activity values were attained with the catalysts supported on HZSM-5. Aromatics were also observed with the catalysts supported on CaZSM-5, despite their deficiency in acid sites. Highly dispersed rhenium is expected to be formed with the use of the inorganic carrier in calcium form. On the other hand, lower reaction rates were observed with rhenium supported on CaZSM-5, in spite of the improved dispersion of the active rhenium species on this catalyst. This was interpreted in terms of the critical role of the acid sites in the conversion of methane to aromatics, compared to the improved dispersion of the active metal.     

A web-based platform for biosignal visualization and annotation

With the advent of wearable sensing and mobile technologies, biosignals have seen an increasingly growing number of application areas, leading to the collection of large volumes of data. One of the difficulties in dealing with these data sets, and in the development of automated machine learning systems which use them as input, is the lack of reliable ground truth information. In this paper we present a new web-based platform for visualization, retrieval and annotation of biosignals by non-technical users, aimed at improving the process of ground truth collection for biomedical applications. Moreover, a novel extendable and scalable data representation model and persistency framework is presented. The results of the experimental evaluation with possible users has further confirmed the potential of the presented framework.     

Surface analysis and adsorption behavior of caffeine as an environmentally friendly corrosion inhibitor at the copper/aqueous chloride solution interface

Abstract

Corrosion inhibitors based on environmentally friendly and harmless products are currently being studied and developed. The corrosion inhibition properties of caffeine (1,3,7-trimethylxanthine) on copper corrosion in aqueous chloride solution (3.5?wt.% NaCl) are analysed here using stationary and transient electrochemical methods, and a theoretical study based on density functional theory is carried out. Caffeine is a very competitive compared to the chemical inhibitors that are often used for copper protection. Electrochemical and impedance experiments reveal that the protective efficiency of caffeine reaches a value of 96% at a concentration of 10^?2?mol L^?1. Based on these results, the Langmuir model appears to be the best representation of the adsorption of caffeine onto the copper surface. Scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy and X-ray diffraction (XRD) were used to determine the surface morphology and the chemical composition of the copper surface in chloride media, in the absence and presence of caffeine. The results show the development of a mechanism of corrosion inhibition. In order to confirm the correlation between the inhibitory effect and the molecular structure of caffeine, quantum chemical parameters are used to calculate its electronic properties.     

Determination of the adhesion force between particles and a flat surface, using the centrifuge technique

By using a centrifuge technique, the influence of powdery material particle size on the adhesion force particle-surface was determined. In order to achieve this, the adhesion of phosphatic rock (ρ_p = 3.090 kg m^− 3) and of manioc starch particles (ρ_p = 1.480 kg m^− 3) on a steel surface were studied. A microcentrifuge that reached a maximum speed rotation of 14000 rpm and which contained specially designed centrifuge tubes was used. There tubes contained the flat surface where the test particles were deposited. The powder particles were dispersed on these disks and the particles detachment were performed using diverse centrifugal speeds. The graphics of particle percentages still adhering on the surface of the disks as a function of the applied detachment force showed that the profile of adhesion force followed a log-normal distribution. The adhesion force increased with particle size. The manioc starch particles presented adhesion forces greater than those for the phosphatic rock particles for all particle sizes studied. The results obtained were compared with the theory proposed by Derjaguin, Muller and Toporov whose theoretical adhesion presented values close to the experimental data for the phosphatic rock particles adhesion on the stainless steel surface. On the contrary, the theoretical values were lower than the experimental ones for the manioc starch particles maybe due to the small roughness of these particles, their physical properties (softer and deformable material) and/or specific chemical interactions since the organic composition of the manioc starch particles that can dominate the adhesion force. Finally, the separation distance among the surfaces in contact (Z₀) was estimated in approximately 1.0 × 10^− 9 m for the phosphatic rock and 5.0 × 10^− 10 m for the manioc starch. These results were weakly dependent on the particle size range.     

Potential for use of crushed waste calcined-clay brick as a supplementary cementitious material in Brazil

The Brazilian ceramic industry generates large amounts of calcined-clay waste. This paper examines the factors that influence its potential for use as a partial replacement of Portland cement. Superplasticized mortars of equal workability containing ground crushed waste calcined-clay brick (GCWCCB) in the proportions of 10, 20, 30 and 40% as a cement replacement were analyzed through mechanical tests, pore structure characterization and durability tests. The results indicated the optimal percentages of substitution lies between 10% to 20%. The potential reduction of CO₂ emissions could be as high as 10% of current Brazilian cement industry emissions if this approach were to be fully implemented, and it could be eligible for “Clean Development Mechanism” credits under Kyoto protocol.     

Essential fatty acids in trout serum lipoproteins,vitellogenin and egg lipids

This paper describes evidence of (n−3) and particularly of 22∶6 (n−3) fatty acid enrichment in trout lipoproteins as well as in vitellogenin, egg lipovitellin and oil globule. Among the lipoproteins, HDL and LDL were the main forms of blood lipid transport, whereas phospholipids and cholesteryl esters are the preferential chemical carriers for (n−3) fatty acid transport. However, cholesteryl esters were less important as esterified fatty acid carriers than in man. Taken together with the data obtained in mammals, our results suggest that there may be a relationship between EFA activity and the distribution of the EFA among the lipoprotein lipid fractions in vertebrates, irrespective of the EFA series. Administration of an (n−3) fatty acid deficient diet for three months prior to trout spawning produced a significant increase in egg lipid content, primarily as a result of the increase of the oil globule composed almost exclusively of triacylglycerols. This diet decreased the 22∶6 (n−3), as well as the (n−3) fatty acid contents of lipoproteins, lipovitellin, vitellogenin and the oil globule. In contrast, the (n−3) fatty acid level was always higher in lipoproteins and lipovitellin than in the vitellogenin and the oil globule. Moreover, the relative levels of 22∶6 (n−3) and total (n−3) fatty acids were quite similar in lipoproteins and lipovitellin on the one hand, and in vitellogenin and the oil globule on the other. These findings suggest a direct relationship between the two forms of plasma lipid transport and the two egg compartments. During ovogenesis, dietary lipids seemed to be diverted from the adipose tissue and essentially deposited in the egg.     

Chlorophyll adsorption on acid-activated clay

An acid-activated clay (Çanakkale montmorillonite from Turkey) was used to adsorb chlorophyll from hexane solutions. The phenomenon seems to be mainly driven by the interaction of chlorophyll with acid sites. The adsorption of chlorophyll on Brönsted acid sites was indicated by a characteristic infrared band for the -OH group at 3671 cm^?1. The variations in the structure of clay mineral and chlorophyll during adsorption have been examined by differential thermal analysis, thermogravimetry and infrared spectroscopy of the activated clay before and after adsorption of chlorophyll. Oxidation of adsorbed chlorophyll was completed at quite a high temperature.