电信运营企业运营成本控制原理的分析

电信运营企业必须实施全新的运营成本控制模式 在中国电信运营业重组后,将面临着新一轮的市场竞争格局;关注控制电信运营成本,提高经济效益,就成为当前电信运营企业亟待解决的重要问题.运营成本控制是根据预定的成本费用目标和既定的条件,对成本费用的发生和形成过程进行主动控制,以实现最优的成本费用方案,保证合理的成本费用补偿,实现最优盈利目标的一种全新的管理行为.运营成本控制是使成本费用管理进入预防性管理的重要标志,是降低成本费用的重要手段.     

Formation of C4 species in the deactivation of a Pd/SiO2 catalyst during the selective hydrogenation of acetylene

The deactivation characteristics of Pd/SiO₂ in the selective hydrogenation of acetylene were correlated with changes in the amount of the C4 species produced. The amounts of butenes produced changed in parallel with the catalyst activity, indicating that the rate limiting step for butene production was the same as that for acetylene hydrogenation. On the other hand, the amount of 1,3-butadiene produced changed, showing a maximum with catalyst deactivation because 1,3-butadiene is an intermediate in the sequential reaction process which involves both the production and consumption of 1,3-butadiene. This was verified by a simultaneous TG/reaction experiment showing that 1,3-butadiene was a precursor of green oil. The catalyst showed a self-regenerative behavior in its activity and the amounts of C4 species produced during the early stage of deactivation because two opposite factors, which contributed to either the lowering or the promotion of activity, were involved in the process. A specific type of polymer species, produced during the initial period of deactivation, is proposed to be responsible for the promotion of catalyst activity.     

40000m~3/h空分设备主换热器的设计及制造

通过对进口 4 0 0 0 0m3 /h空分设备主换热器进行结构分析及对比模拟计算 ,用国产传热翅片进行设计、采用真空钎焊工艺制造的主换热器 ,经并网运行 ,设计指标优于原空分设备 ,为今后成套大型空分设备板翅式换热器国产化设计、制造创造了条件。     

A hybrid extended finite element/level set method for modeling phase transformations

A hybrid numerical method for modelling the evolution of sharp phase interfaces on fixed grids is presented. We focus attention on two‐dimensional solidification problems, where the temperature field evolves according to classical heat conduction in two subdomains separated by a moving freezing front. The enrichment strategies of the eXtended Finite Element Method (X‐FEM) are employed to represent the jump in the temperature gradient that governs the velocity of the phase boundary. A new approach with the X‐FEM is suggested for this class of problems whereby the partition of unity is constructed with C¹(Ω) polynomials and enriched with a C⁰(Ω) function. This approach leads to jumps in temperature gradient occurring only at the phase boundary, and is shown to significantly improve estimates for the front velocity. Temporal derivatives of the temperature field in the vicinity of the phase front are obtained with a projection that employs discontinuous enrichment. In conjunction with a finer finite difference grid, the Level Set method is used to represent the evolution of the phase interface. An iterative procedure is adopted to satisfy the constraints on the temperature field on the phase boundary. The robustness and utility of the method is demonstrated with several benchmark problems of phase transformation. Copyright © 2002 John Wiley & Sons, Ltd.     

利用高酸值餐饮废油脂制备生物柴油

以高酸值餐饮废油脂为原料,在酯化反应后再经两步酯交换反应制备生物柴油。在酯化反应中添加吸水剂可降低油脂的酸值,经一次酯化反应即可将油脂的酸值降至2m g/g左右,满足酯交换反应的要求。考察了酯化反应中吸水剂的添加方式、种类及其用量对酯化反应的影响,以及酯交换催化剂的种类及用量对脂肪酸甲酯(FAME)收率和产物组成的影响。实验结果表明,以凹凸棒土为吸水剂(用量为餐饮废油脂中游离脂肪酸质量的3%),且在酯化反应30m in时加入,酯化效果较好;以质量比为1∶1的NaOH和KOH混合物为催化剂进行两步酯交换反应时,催化剂的最佳用量依次为1.00%和0.75%(质量分数,基于油脂的质量),FAME收率最高达到96.33%。     

一种改进的共同进化遗传算法及其应用

将共同进化遗传算法应用于临床营养决策优化中,虽然取得了一定成果,但算法中仍存在早熟现象、局部搜索能量弱等问题,为此提出一种改进的共同进化模型。算法使用新的子群体划分方法和交叉算子,引入精英保留策略、信息交换原则和小生境技术。通过对糖尿病营养治疗的仿真表明,改进后的算法在保证群体多样性和避免早熟现象的前提下,提高了算法的局部和全局寻优能力,且膳食配方中营养素达标率符合要求,满足专家建议的糖尿病饮食需求。     

大型电除尘器的设计、安装及操作要点

探讨了硫酸生产用大型电除尘器的要求、设计参数的选择及结构设计.指出要重视大型电除尘器的设计、制造和安装质量,并精心操作和维护,以实现长周期稳定运行.生产实践表明,只有在各个环节都做到精益求精,才能使国产大型电除尘器的质量和性能尽快达到当今世界先进水平.     

用Flash制作会说话的照片

利用Flash5制作会说话的照片，使照片变成一张张有趣的动画卡片。     

Convolutional solutions of partial difference equations

A significant part of the theory of one-dimensional linear shift-invariant systems is based on the concept of weighting function (or impulse response): the output is the convolution of the weighting function with the input. This paper introduces the concept of linear translation-invariant systems and uses this notion in studying impulse response, z-transforms, and transfer functions for multidimensional systems.