多孔硅发光机制的分析

从量子力学的基本理论出发讨论了量子限制效应，推导出多孔硅有效禁带宽度增量并用量子限制效应和表面态及其物质在发光中作用的理论解释了ＰＳ光致发光的实验现象。     

自适应相位制中波同步广播及现场试验

在本试验中，采用智能同步广播激励器和ＣＣＴＶ传输的１ＭＨｚ标频，实现了中波同步广播同频保护率趋于０ｄＢ．并提出了自适应相位跟踪同步的概念。     

Enhancement of oxide break-up by implantation of fluorine inpoly-Si emitter contacted p+-n shallow junctionformation

In this study, it is demonstrated that the incorporation of fluorine can enhance poly-Si/Si interfacial oxide break-up in the poly-Si emitter contacted p⁺-n shallow junction formation. The annealing temperature for breaking up the poly-Si/Si interfacial oxide has been found to be as low as 900°C. As a result, the junction depth of the BF₂-implanted device is much larger than that of the boron-implanted device     

Performance analysis of adaptive interleaving for OFDM systems

We proposed a novel interleaving technique for orthogonal frequency division multiplexing (OFDM), namely adaptive interleaving, which can break the bursty channel errors more effectively than traditional block interleaving. The technique rearranges the symbols according to instantaneous channel state information of the OFDM subcarriers so as to reduce or minimize the bit error rate (BER) of each OFDM frame. It is well suited to OFDM systems because the channel state information (CSI) values of the whole frame could be estimated at once when transmitted symbols are framed in the frequency dimension. Extensive simulations show that the proposed scheme can greatly improve the performance of the coded modulation systems utilizing block interleaving. Furthermore, we show that the adaptive interleaving out performs any other static interleaving schemes, even in the fast fading channel (with independent fading between symbols). We derived a semi-analytical bound for the BER of the adaptive interleaving scheme under correlated Rayleigh fading channels. Furthermore, we discussed the transmitter-receiver (interleaving pattern) synchronization problem     

Microwave plasma enhanced chemical vapor deposition diamond synthesis from high carbon content source

To synthesize diamond films by microwave plasma enhanced chemical vapor deposition (MPECVD), the methane concentration (CH₄/H₂)plays a crucial role. It is well-known that there always exists a critical methane concentration (≤0.6%) only below which a good quality diamond film can be obtained. In this study, however, the phenomena of diamond synthesis resulting from high carbon concentration conditions were observed. The molten metals, e.g., Ag, Cu, were used as the deposition substrates on which crystalline diamonds can be achieved from a methane content of CH₄/H₂≥6% or even from solid carbon sources. These results suggest that there may exist a low methane content boundary layer (<0.6%) in the proximity of molten metal surface on which suitable species, CH, CH⁺, H_α and H_β are composed for the diamond nucleation and growth similar to the condition as in the conventional low methane contents. The molten metal inclines to dissolve other forms of carbonaceous materials other than diamond, and thus keeps a much higher steady supply of carbon atoms that enhances the quality as well as the growth rate of the forming diamonds. Received: 23 June 2001 / Accepted: 23 July 2001     

结构振动控制中压电阻尼技术研究—压电被动阻尼技术（一）

压电阻尼技术有两种类型：压电被动阻尼技术和压电主动阻尼技术。本文对其中的压电被动阻尼技术进行了研究，结果表明：通过给压电元件并联适当的外部电路，可使压电系统具有与粘弹阻尼材料及动力吸振器相似的物理特性。合理配置电路参数，可以实现最优阻尼比。     

Pd-Ge contact to n-GaAs with the TiW diffusion barrier

Pd-Ge based ohmic contact to n-GaAs with a TiW diffusion barrier was investigated. Electrical analysis as well as Auger electron spectroscopy and the scanning electron microscopy were used to study the contact after it was subjected to different furnace and rapid thermal annealing and different aging steps. All analyses show that TiW can act as a good barrier metal for the Au/Ge/Pd/n-GaAs contact system. A value of 1.45 × 10⁻⁶ Ω-cm² for the specific contact resistance was obtained for the Au/TiW/Ge/Pd/n-GaAs contact after it was rapid thermally annealed at 425°C for 90 s. It can withstand a thermal aging at 350°C for 40 h with its ρ_c increasing to 2.94 × 10⁻⁶Ω-cm² and for an aging at 410°C for 40 h with its ρ_c increasing to 1.38 × 10⁻⁵ Ω-cm².     

主动阻尼控制中的扩展加速度输出反馈法

正位置反馈(PPF)是一种能够显著提高结构模态阻尼的控制策略，但是这种策略在原理和应用中具有一定的局限性。本文在指出了传统的PPF控制器的优缺点基础上，提出一种扩展的加速度输出反馈控制方法AOEF，同时给出了最优AOEF控制器的设计计算方法。仿真计算和实验表明，在传感器／作动器同相的情况下，采用这种控制器的闭环系统具有无条件的稳定性，在非同相的情况下也能达到优良的控制性能。     

二维地震过障碍观测系统模式及其参数设计

在二维地震勘探中,为了避免因地表障碍物使地震反射剖面出现间断现象,需要改变观测系统设计,跨越障碍物(江河、城镇等),以保证反射同相轴能连续追踪对比。在以往地震勘探中,有时因过障碍观测系统设计不合理,不但增加勘探费用,而且影响采集质量。因此只有科学合理地设计过障碍观测系统模式和参数,才能保证地震测线顺利通过障碍物,得到较好的障碍物下方的地震资料并降低勘探成本。为此本文在调查和研究大量野外实际的过障碍观测系统的基础上,总结归纳成三大类过障碍观测系统模式,并分析其特点和应用范围。采用图解法,推导出主要模式的跨越宽度、最小炮检距及最大炮检距等参数公式。采用这套过障碍观测模式不仅可以得到和障碍区两侧等质量的地震资料,而且可以有效地降低勘探成本。