50kg／m钢轨轨底缺陷的检验和分析

钢轨轨底缺陷有三种：底伤、结疤和底裂缺陷。取２０根有底缺陷５０ｋｇ／ｍＵ７１Ｍｎ钢轨做试样，通过低倍、断口、金相检验和扫描电能谱分析，详细描述了轨底缺陷的宏观和微观特征，研究出钢轨轨底缺陷出现的规律臁其产生的原因。通过对比试验，发现淄博１号保护渣有利于改善钢锭表面质量，提高钢轨一级品率。     

Novel polymeric aromatic lithium sulfonylimides as salts for polymer electrolytes

Three new polymeric aromatic lithium sulfonylimides were used as salts in high molecular weight poly(ethylene oxide) (PEO) electrolytes. Their conductivity and electrochemical stability behaviors were investigated. The electrolytes with lithium poly[4,4′‐(hexafluoroisopropylidene)diphenoxy]sulfonylimide (LiPHFIPSI) showed a better conductive performance compared with the other two lithium salts. The best conductivity was obtained for PEO/LiPHFIPSI EO/Li = 16 (1.90 × 10^?4 S/cm at 60°C). Thermal analysis indicated that the salts effectively decreased the crystallinity of PEO. Moreover, the electrolytes also had good electrochemical stability and their oxidative potential was to 5.5 V versus Li/Li⁺. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1802–1805, 2002     

Stabilization of SnO2 ultrafine particles by additives

In order to stabilize ultrafine particles of SnO₂ which is essential to obtain high gas sensitivity, a systematic investigation was undertaken regarding the stabilizing effects of 5 at% impregnated foreign additives, consisting of oxides or polyoxy compounds of 31 metals and 3 non-metals. The data of specific surface area, SA, as well as SnO₂ crystallite size, D, evaluated from X-ray diffraction showed that the additives could be classified into several groups according to the effectiveness. The most effective group, consisting of P-Ba, Sm, Ba, P, Mo, W, Ca, Sr, Cr and In, could keepD less than 10 nm even after calcination at 900°C, whereas pure SnO₂ underwent grain growth to haveD of 13 and 27 nm at 600 and 900°C, respectively. Electron microscopy revealed that neck sizes, X, between crystallites were fairly proportional toD(X/D = 0.80). A simple analysis of SA and D data based on a monosized sphere model suggested that each crystallite was coordinated with 3–4.5 neighbours through the necks. The existing state and stabilizing mechanism of additives are discussed in conjunction with the electrical resistance of porously sintered elements.     

超声跟踪法制作误差对器件性能的影响及补偿

研究发现快模入射超声跟踪氧化碲器件的布喇格损耗频响对于参数误差十分敏感,因而制作误差可能对器件性能有较大影响。本文系统研究了这种影响及其补偿方法,结果表明,当相邻两换能片之间中心距S有5%的误差和声偏置角丫_0有10%的误差时,通过调整入射角θ_1可作出完全的补偿。     

合成镁白云石砂的研制与应用

选用优质轻烧白云石、轻烧菱镁石为原料,经干法消化、高温煅烧,制得杂质含量2.66％、体密>3.28g/cm~3的合成镁白云石砂。用合成镁白云石砂制得CaO MgO>97％,总杂质含量2.11％的高纯合成镁白云石砖,在太原钢铁公司AOD炉第一次试用,最高炉令达36炉次。     

2－重自补图论（Ⅲ）──计数理论

文中解决了２－重自补图的计数问题，获得了具有ｐ个顶点的２－重自补图的数目是其中Ｚ（Ａ）表示置换群Ａ的圈指标，Ｓ￣（２）＿ｐ表示ｐ次对称群的对群．     

油底壳冲压过程的有限元数值模拟

采用有限元软件MARC，基于更新拉格朗日的弹塑性本构方程建立了一个有限元模型来模拟油底壳的成形过程。模拟得出了油底壳变形过程中板材的应力、应变、摩擦和厚度分布，揭示了成形过程中金属的塑性变形规律，并预测了可能发生失效的区域，为成形工艺设计提供了有效的分析工具。     

几种新型多波长光纤激光器

综合报道几种新型多波长光纤激光器 ,并对这些激光器的机理、实验装置和研究结果进行了详细介绍 ,对今后多波长激光器的发展方向作一展望。     

多孔材料气体流量的简便计算

采用简便方法计算气体通过多孔材料的流量。当层流时，流量与压差按线性关系计算；紊流时，应按幂函数关系计算。本文提出了计算公式。