氧化铝厂渣浆泵机械密封的失效形式及改进措施

本文介绍了渣浆泵机械密封的失效形式,并根据长期现场工作经验,分析了机械密封泄漏的主要原因,据此提出了改进措施,通过对动静环密封面倒角,改变密封面尺寸及载荷系数后有效地解决了由于径向跳动过大而引起的密封面刮碰擦裂的失效问题。     

Preparation of ultra-fine copper powder and its lead-free conductive thick film

In this paper, non-agglomerated monodispersed ultra-fine copper metallic powders have been synthesized with chemical reduction method. Fine lead-free glass powders were also prepared by solid synthesis process. Thick film paste prepared by above-mentioned copper metallic powders and lead-free glass powders was applied as conductive paste of MLCC. Mixture of glass and zinc oxide give the thick film a high adhesion strength which is attributed to the rough interface from interfacial reaction between glass and chip, and a good densification. Diffusion of metal between copper thick film and nickel thick film is clear. Ni-Cu solid solution appears under high temperature firing.     

Detrended Fluctuation Analysis of the Human EEG during Listening to Emotional Music

A nonlinear method named detrended fluctuation analysis （DFA） was utilized to investigate the scaling behavior of the human electroencephalogram （EEG） in three emotional music conditions （fear, happiness, sadness） and a rest condition （eyes-closed）. The results showed that the EEG exhibited scaling behavior in two regions with two scaling exponents β1 and β2 which represented the complexity of higher and lower frequency activity besides α band respectively. As the emotional intensity decreased the value of β1 increased and the value of β2 decreased. The change of β1 was weakly correlated with the ＇approach-withdrawal＇ model of emotion and both of fear and sad music made certain differences compared with the eyes-closed rest condition. The study shows that music is a powerful elicitor of emotion and that using nonlinear method can potentially contribute to the investigation of emotion.     

Architectural Control of Hierarchical Nanobelt Superstructures in Catanionic Reverse Micelles

BaXO₄ (X = Mo, W) nanobelts and a variety of hierarchical superstructures assembled from the nanobelts have been synthesized in a catanionic reverse‐micelle system. The effects of various factors, such as the mixing ratio (r) between the anionic and cationic surfactants, the temperature, and the presence of polymeric additives, on the formation of the nanobelts and their hierarchical assembly have been examined in detail. In particular, r has been shown to be powerful in modulating the formation and assembly of the BaMoO₄ and BaWO₄ nanobelts. Architectural control of the penniform nanobelt superstructures has been readily achieved by changing the experimental parameters. A plausible two‐stage growth mechanism has been proposed for the formation of penniform BaXO₄ nanobelt superstructures in catanionic reverse micelles.     

Formation and Characterization of 1.5-Monolayer Self-Assembled InAs/GaAs Quantum Dots Using Postgrowth Annealing

In this paper, we report that low-density InAs/GaAs quantum dots (QDs) can be formed by postgrowth annealing the samples with 1.5-monolayer (ML) InAs coverage, which is thinner than the critical layer thickness for the Stranski-Krastanov growth. The annealing procedure was performed immediately after the deposition of the InAs layer. The effects of annealing time and annealing temperature on the dot density, dot size, and optical characteristics of the QDs were investigated. The optimum annealing conditions to obtain low-density QDs are longer than 60 s and higher than 500degC . Meanwhile, no luminescence can be observed for the wetting-layer, which may suggest that the postgrowth annealing will make the wetting layer thinner and thus reduce the effects of wetting layer on carrier relaxation and recombination. On the other hand, we observe that a decrease of the PL intensity at the annealing conditions of 60 s and 515degC , which is possibly due to the increasing surface dislocations resulted from the In adatom desorption at higher annealing temperature.     

催化技术在降低汽油机排放方面的应用

本文介绍了当前催化技术在改善和降低汽油机排放方面的应用情况，指出：催化技术是改善汽油机排放的一种有效措施和重要手段。     

压水堆核电厂的核清洁工作介绍

核清洁是保障核电厂安全、高效运行的基础。本文阐述了核清洁工作的技术要求、管理方法和实施步骤，并对未来的工作提出建议。     

对企业账面利润与现金流量关系的认识

本文阐述了企业账面利润与现金流量的关系 ,指出了企业账面利润与现金流量的四个不同点 ,并且提出了一个现代企业应如何在四个方面做好工作 ,正确处理好这两者的关系。