A medical hand tool physical interaction evaluation approach for prototype testing using patient care simulators

The purpose of this study was to develop and test a physical ergonomics assessment approach for medical device handles. The method assesses wrist posture and force of exertion simultaneously by task element. Electrogoniometers and EMG sensors were connected through a data acquisition module for synchronization with video recordings of trials. Task analysis of video recordings were performed offline with Observer XT software. Average posture and force data across several repetitions of individual task elements were calculated and presented in a format suitable for informing product designers of specific issues during a test trial. A handle comfort questionnaire is proposed to survey subjective responses. The evaluation approach was applied to an endoscope needle in sampling a biopsy from the stomach wall using a gastrointestinal track simulator with ten physician surrogates. The results showed that for all task elements the wrist was in extension (33(°)-45(°)). Peak muscle forces ranged from 28% to 68% MVC across the three muscles studied. Muscle peak forces were above ACGIH HAL maximum threshold limits for four of the seven task elements, and above the action limit for all seven task elements for two muscles. The handle comfort questionnaire data also supported the high muscle force findings, and also on force distribution on the handle due to contact stresses. This combined approach could be used to collect and report detailed early stage ergonomics data from user trials on patient care simulators. The approach is proposed for use by medical device designers at the design stage of new products using prototypes, but it could also be used on existing products with real patients.     

Brain-computer interfaces for 1-D and 2-D cursor control: designs using volitional control of the EEG spectrum or steady-state visual evoked potentials.

We have developed and tested two electroencephalogram (EEG)-based brain-computer interfaces (BCI) for users to control a cursor on a computer display. Our system uses an adaptive algorithm, based on kernel partial least squares classification (KPLS), to associate patterns in multichannel EEG frequency spectra with cursor controls. Our first BCI, Target Practice, is a system for one-dimensional device control, in which participants use biofeedback to learn voluntary control of their EEG spectra. Target Practice uses a KPLS classifier to map power spectra of 62-electrode EEG signals to rightward or leftward position of a moving cursor on a computer display. Three subjects learned to control motion of a cursor on a video display in multiple blocks of 60 trials over periods of up to six weeks. The best subject's average skill in correct selection of the cursor direction grew from 58% to 88% after 13 training sessions. Target Practice also implements online control of two artifact sources: 1) removal of ocular artifact by linear subtraction of wavelet-smoothed vertical and horizontal electrooculograms (EOG) signals, 2) control of muscle artifact by inhibition of BCI training during periods of relatively high power in the 40-64 Hz band. The second BCI, Think Pointer, is a system for two-dimensional cursor control. Steady-state visual evoked potentials (SSVEP) are triggered by four flickering checkerboard stimuli located in narrow strips at each edge of the display. The user attends to one of the four beacons to initiate motion in the desired direction. The SSVEP signals are recorded from 12 electrodes located over the occipital region. A KPLS classifier is individually calibrated to map multichannel frequency bands of the SSVEP signals to right-left or up-down motion of a cursor on a computer display. The display stops moving when the user attends to a central fixation point. As for Target Practice, Think Pointer also implements wavelet-based online removal of ocular artifact; however, in Think Pointer muscle artifact is controlled via adaptive normalization of the SSVEP. Training of the classifier requires about 3 min. We have tested our system in real-time operation in three human subjects. Across subjects and sessions, control accuracy ranged from 80% to 100% correct with lags of 1-5 s for movement initiation and turning. We have also developed a realistic demonstration of our system for control of a moving map display (http://ti.arc.nasa.gov/).     

A theory of pad conditioning for chemical-mechanical polishing

Statistical models are presented to describe the evolution of the surface roughness of polishing pads during the pad-conditioning process in chemical-mechanical polishing. The models describe the evolution of the surface-height probability-density function of solid pads during fixed height or fixed cut-rate conditioning. An integral equation is derived for the effect of conditioning on a foamed pad in terms of a model for a solid pad. The models that combine wear and conditioning are then discussed for both solid and foamed pads. Models include the dependence of the surface roughness on the shape and density of the cutting tips used in the conditioner and on other operating parameters. Good agreement is found between the model, Monte Carlo simulations and with experimental data.     

Memory and Emotions for the September 11, 2001, Terrorist Attacks in Patients With Alzheimer's Disease, Patients With Mild Cognitive Impairment, and Healthy Older Adults.

National traumatic events can produce extremely vivid memories. Using a questionnaire administered during telephone interviews, the authors investigated emotional responses to, and memory for. the September 11, 2001, terrorist attacks in patients with Alzheimer's disease (AD), patients with mild cognitive impairment (MCI), and healthy older adults in the initial weeks following the event and again 3-4 months later. There were several notable findings. First, patients with AD showed less memory than patients with MCI and older adults. Second, patients with AD, but not patients with MCI or older adults, appeared to retain more memory for personal versus factual information. Third, patients with AD and older adults did not differ in the intensity of their reported emotional responses to the attacks, whereas patients with MCI reported relatively less intense emotional responses. Last, distortions of memory for personal information were frequent for all participants but were more common in patients with AD. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Determining the absolute efficiency of a delay line microchannel-plate detector using molecular dissociation

We present a method to measure the absolute detection efficiency of a delay-line microchannel-plate detector using the breakup of diatomic molecular ions. This method provides the absolute total detection efficiency, as well as the individual efficiency for each signal of the detector. The method is based on the fact that molecular breakup always yields two hits on the detector, but due to finite detection efficiency some of these events are recorded as single particles while others are detected in pairs. We demonstrate the method by evaluating the detection efficiency for both timing and position signals of a delay-line detector using laser-induced dissociation of molecular ions. In addition, the detection efficiency as a function of position has been determined by dividing the detector into sectors.     

Cooperative control of mobile sensor networks:Adaptive gradient climbing in a distributed environment

We present a stable control strategy for groups of vehicles to move and reconfigure cooperatively in response to a sensed, distributed environment. Each vehicle in the group serves as a mobile sensor and the vehicle network as a mobile and reconfigurable sensor array. Our control strategy decouples, in part, the cooperative management of the network formation from the network maneuvers. The underlying coordination framework uses virtual bodies and artificial potentials. We focus on gradient climbing missions in which the mobile sensor network seeks out local maxima or minima in the environmental field. The network can adapt its configuration in response to the sensed environment in order to optimize its gradient climb.     

Horizontal transmission of Escherichia coli O157:H7 during cattle housing

Ruminant livestock, particularly cattle, is considered the primary reservoir of Escherichia coli O157:H7. This study examines the transmission of E. coli O157:H7 within groups of cattle during winter housing. Holstein Friesian steers were grouped in six pens of five animals. An animal inoculated with and proven to be shedding a marked strain of E. coli O157: H7 was introduced into each pen. Fecal (rectal swabs) and hide samples (900 cm2 from the right rump) were taken from the 36 animals throughout the study. Water, feed, and gate or partition samples from each pen were also examined. Within 24 h of introducing the inoculated animals into the pens, samples collected from the drinking water, pen barriers, and animal hides were positive for the pathogen. Within 48 h, the hides of 20 (66%) of 30 cohort animals from the six pens were contaminated with E. coli O157:H7. The first positive fecal samples from the noninoculated cohort animals were detected 3 days after the introduction of the inoculated steers. During the 23 days of the study, 15 of 30 cohort animals shed the marked E. coli O157:H7 strain in their feces on at least one occasion. Animal behavior in the pens was monitored during a 12-h period using closed circuit television cameras. The camera footage showed an average of 13 instances of animal grooming in each pen per hour. The study suggests that transmission of E. coli O157:H7 between animals may occur following ingestion of the pathogen at low levels and that animal hide may be an important source of transmission.     

Absorption and reflection of infrared radiation by polymers in fire‐like environments

In large‐scale fires, the input of energy to burning materials occurs predominantly by radiative transfer. The in‐depth (rather than just surface) absorption of radiant energy by a polymer influences its ignition time and burning rate. The present investigation examines two methods for obtaining the absorption coefficient of polymers for infrared radiation from high‐temperature sources: a broadband method and a spectral method. Data on the total average broadband transmittance for 11 thermoplastics are presented (as are reflectance data), and the absorption coefficient is found to vary with thickness. Implications for modeling of mass loss experiments are discussed. Copyright © 2011 John Wiley & Sons, Ltd.     

[2.2]Paracyclophane as a Target of the Organic Solid State: Emergent Properties via Supramolecular Construction

In this account, we review the synthesis of [2.2]paracyclophanes in the organic solid state. Reactions in crystalline solids provide a means to obtain molecules with high degrees of stereocontrol that can also be unattainable in solution. We show that [2.2]paracyclophanes form in the solid state stereospecifically and in quantitative yield via intermolecular [2+2] double photodimerization reactions. The double cycloaddition that affords a paracyclophane in the solid state does not readily occur in solution. Small molecules in the form of hydrogen-bond-donor templates can provide access to [2.2]paracyclophanes in a solid by design. A [2.2]paracyclophane obtained using a hydrogen-bond template is shown to exhibit attractive optical properties and has been employed as a building block of a metal-organic framework (MOF).     

Moisture content in timber decking exposed to bushfire weather conditions

Ignition of the external combustible elements of a building is one of the key factors leading to house loss in bushfires. Timber elements contain moisture that migrates into and out from the timber surface, depending on the surrounding ambient conditions. In extreme hot and dry conditions, such as those associated with severe bushfire weather, the moisture contents (MCs) in building timbers can drop well below the normal levels. In this paper, we not only qualify a methodology to assess the likely MCs of timbers under typical bushfire conditions, but also quantify the low levels of moisture that can be expected for the climatic conditions experienced in Melbourne—one of Australia's bushfire‐prone regions. Copyright © 2011 John Wiley & Sons, Ltd.