Obesity does not reduce maximum acceptable weights of lift

The maximum acceptable weights of lift (MAWL) of obese and non-obese participants were empirically investigated. Three obesity levels were considered: non-obese (18.5 kg/m(2)< or= body mass index (BMI)or= 40 kg/m(2)). Ten male and 10 female participants were recruited for each obesity level. The participants determined their MAWL for 18 different lifting task conditions (six lifting frequencies x three lifting heights). An analysis of variance (ANOVA) was conducted to determine the effects of obesity level, gender, lifting height, lifting frequency and their interactions on MAWL. Overall, the ANOVA results indicated that obesity does not reduce MAWL, and thus, suggested that the existing MAWL data can be used to accommodate both general and obese workers. However, further studies based on the biomechanical and physiological approaches are required to provide more complete understanding of obesity effects on lifting tolerance limits.     

半透膜仪采集空气中多氯联苯采样速度与其结构和性质定量构效关系研究

根据MOPAC2009软件包中PM6算法得到的分子描述符研究半透膜仪(SPMDs)采集大气中多氯联苯(PCBs)采样速度(R_(air))的定量构效关系(QSPR)模型,并分析影响R_(air)的关键因素。以半经验PM6算法得到的分子量子化学描述符作为预测变量,采用偏最小二乘算法(PLS)构建了R_(air)的QSPR模型。根据交叉验证,所得到的最佳模型中PLS成分解释的因变量的累积变异(Q~2_(cum))为0.683,这表明该模型具有良好的预测能力和稳健性。通过外部验证和将实验测得的R_(air)与预测得到的R_(air)进行比较,对所构建模型的稳定性和可靠性进行了验证,结果表明无论是训练组还是预测组,其预测值与实测值间均具有较好的线性关系,线性相关系数均大于0.8376。对PCBs采样速度R_(air)的主要影响因素为PCBs与SPMDs中甘油三油酸酯分子间的相互作用大小和为将PCBs溶解在甘油三油酸酯中形成洞穴所需能量要求。     

MetaMol: high-quality visualization of molecular skin surface

Modeling and visualizing molecular surfaces is an important and challenging task in bioinformatics. Such surfaces play an essential role in better understanding the chemical and physical properties of molecules. However, constructing and displaying molecular surfaces requires complex algorithms. In this article we introduce MetaMol, a new program that generates high-quality images in interactive time. In contrast with existing software that discretizes the surface with triangles or grids, our program is based on a GPU accelerated ray-casting algorithm that directly uses the piecewise-defined algebraic equation of the molecular skin surface. As a result, both better performances and higher quality are obtained.     

Raman microprobe analysis of preforms and optical fibers

The concentration profile of various dopants (germanium, phosphorus, and fluorine) in preforms and optical fibers has been obtained with a Raman microprobe. A 2-microm spatial resolution was achieved. In the case of germanium and phosphorus, the results agree quite well with those obtained with an electron microprobe. Raman spectroscopy easily detects fluorine. From measurements of various F-doped samples, diffusion of fluorine in undoped and doped silica is suggested.     

Crossover: online pests plaguing the off line world

During the past 10 years, several technological trends have emerged that significantly and positively affected today's world. Two in particular are noteworthy: the apparently unbounded desire to network any and all devices and deployment of Microsoft's operating systems in everything from consumer PCs and business servers to embedded devices. We could well see the telecommunications boom; the rise of the Internet, and the rush to connect everything to it as one of humanity's milestones, not far removed from, that of the invention of the telephone or telegraph. Computer networking, over the Internet, particularly, has democratized the publishing of information, made massive amounts of information and services accessible to the general public, and enabled new business models. But everything has a dark side. Along with its benefits, the Internet has brought about such things as cybercrime, computer worms, online fraud, spam, and denial-of-service attacks, among other online unpleasantness. This down side is considered in the article.     

SUPERCRITICAL EXTRACTION OF ISRAELI MISHOR ROTEM OIL SHALE 1. BATCH EXTRACTION WITH TOLUENE

ABSTRACT

Recovery of organic material from Israeli Mishor Rotem oil shale with toluene under supercritical conditions was investigated. The rate of solubilization, change of structural aspects and molecular weights of solubilized products with time were investigated. Experiments to recover organic material from shale were performed in a stainless steel high pressure autoclave. Shale Sample was charged in a sintered glass crucible suspended from the cap of the autoclave; toluene was the solvent in all experiments. Solvent/shale ratio was 20; experimental temperature was 34O^°C. The gaseous products were analyzed by gas chromatography. Molecular weights of the organic material recovered was measured by gel permeation chromatography technique. FTIR spectra of the organic material recovered and fractions isolated by extractive and chromatographical methods were measured. The amount of kerogen remaining in the spent shale was determined by oxidative derivative thermal gravimetry. A steady state in the production of solubles was reached within 60 minutes at 340^°C with a yield of 60 percent. After this time no further amounts of organic material was recovered. The molecular weights of the recovered organic material decreased at extended times after the steady state was reached. It appeared that the structure of the organic material recovered remained unchanged until the steady state condition is reached whereupon some structural changes occurred. At extended times the organic material was converted into more aromatic and less hydroxyl containing structures of lower molecular weight. The organic material recovered upon reaching steady state was fractionated into 63 percent oils (pentane solubles) and 32 percent asphaltenes (toluene solubles). The oile contained aliphatics and monoaromatic structures and the asphaltenes contained polyaromatic polar structures. Gases which constituted 4 percent of the initial kerogen were produced during the heating period to 340^°C. The amount of carbon monoxide produced remained constant and amounts of hydrogen, carbon dioxide and methane decreased after supercritical conditions were attained.     

The inhibition of butyl acrylate by p-methoxyphenol

The lengths of polymerization induction periods for butyl acrylate (BA) in the presence of air were measured at temperatures from 54 to 122.5°C. The kinetics of MEHQ and oxygen consumption at 80 and 100°C are characterized by their own induction periods followed by sharply accelerated rates immediately prior to the BA polymerization. It is proposed that these phenomena are consistent with an “intrinsic” BA radical formation rate that is extremely slow compared to the ultimate rate of radical production from the decomposition of peroxides. These oligomeric peroxides build up during the induction period and, at its end, rapidly decompose with a resulting “radical cascade effect,” causing the accelerated inhibitor and oxygen consumption followed rapidly by BA polymerization. Thus, confirmation that a supply of BA has a normal MEHQ concentration may not be sufficient to ensure its stability. Strict adherence to the storage conditions and shelf life recommended by the supplier⁶ is absolutely vital to storage safety, especially because uncontrolled poly-merization of BA has the potential to be violent (polymerization exotherm rates higher than 1000°C/min were observed). © 1996 John Wiley & Sons, Inc.     

Theoretical prediction of sulfuric acid condensation rates in boiler flue gas

Prediction of acid condensation has a critical role in designing heat exchangers to recover water vapor from power plant flue gas. Rates of mass transfer for condensation of sulfuric acid vapors onto heat exchanger tubes were theoretically investigated and a computer program for numerical simulations of sulfuric acid (H₂SO₄) condensation in a flue gas condensing heat exchanger was developed. Governing equations based on mass and energy balances for the system were derived to predict variables such as flue gas exit temperatures, cooling water outlet temperatures, and molar fractions and condensation rates of water and sulfuric acid vapors. The associated equations were solved using an iterative solution technique and a one dimensional finite difference method with forward differencing. The Controlled Condensation Method (EPA Method 8B) was applied to experimentally obtain concentration profiles of sulfuric acid vapor in flue gas along downstream in the system. Predicted results of sulfuric acid vapor condensation were compared with empirical data for model validation, and the discrepancy is analyzed in terms of measurement and computation uncertainties. It is found that from both modeling and test results sulfuric acids as well as water vapors are reduced and separated in condensing heat exchanger due to mass transfer with condensation in flue gas. The modeling methodology described here is applicable to theoretical prediction of sulfuric acid and water condensation in full scale flue gas condensing heat exchanger applications.