维氏硬度检测中不确定度初探

通过分析维氏硬度检测中的不确定度，计算了各不确定度分量所占的权重，得到HVlO(440--738)范围内的相对不确定度为1．3％--1．7％。     

两相管流工艺计算软件的研制

利用流体力学理论 ,结合目前国内外最新的两相流理论和实验研究成果 ,在描述气液两相流水力计算、热力计算和流型判断的数学物理模型基础上 ,研制出适用于海洋、沙漠、丘陵地区原油与伴生气、凝析天然气与凝液输送工艺的一套新的计算模拟软件TFTCS。介绍TFTCS软件的结构、功能、适用范围。用该软件对锦州 2 0 - 2海底湿天然气管道进行模拟计算 ,并与管线生产数据进行对比 ,用国外同类软件PIPEPHASE进行验算。实例计算分析表明 ,该软件功能完善 ,操作方便 ,计算结果可靠 ,能满足油气混输管道的设计计算和生产管理的需要     

An anti-plane crack perpendicular to the weak/micro-discontinuous interface in a bi-FGM structure with exponential and linear non-homogeneities

Treated was an anti-plane crack perpendicular to the interface of an exponential-type FGM strip bonded to another linear-type FGM substrate with infinite thickness. Through Fourier integral transform, the problem was reduced as a Cauchy singular integral equation, which was further solved numerically by the Lobatto–Chebyshev collocation method. Based on the numerical solution, the effects of the geometrical and physical parameters on the stress intensity factor (SIF) were analyzed and the following conclusions were obtained: (a) A notable discrepancy between the interface-perpendicular crack and the interfacial one is that, to reduce the weak-discontinuity of interface or to make the interface micro-discontinuous will not necessarily decrease the SIF of the former, but will surely decrease that of the latter. (b) When a crack tip is situated very near to the interface (or free surface), its SIF will be high and totally dominated by the interface (or free surface). (c) To increase the stiffness of the FGM on one side of the interface is beneficial to preventing the crack on the other side from growing toward the interface. Besides, some practical suggestions were further given for material design in the field of composites.     

Analytical modeling and experimental study of tensile strength of asphalt concrete composite at low temperatures

In this study, analytical modeling of the tensile strength of hot-mix asphalt (HMA) mixtures at low temperatures was developed. To do this, HMA mixtures were treated as a two-phase composite material with aggregates (coarse and fine) dispersed in an asphalt mastic matrix. A two-phase composite model, which was similar to Papanicolaou and Bakos's [J. Reinforced Plast. Compos. 11 (1992) 104] model with a particle embedded in an infinite matrix, was proposed. Unlike Papanicolaou and Bakos's model, an axial stress was introduced to the fiber end to consider the load transferred from the asphalt mastic the aggregate. Efforts were also made to consider the effect of aggregate gradation, asphalt mastic degradation, and interfacial damage between the aggregates and asphalt mastic matrix on the tensile strength of the HMA mixtures. Experimental investigations were conducted to validate the developed theoretical relations. A reasonable agreement was found between the predicted tensile strength and the experimental results at low temperatures. Parameters affecting the tensile strength of asphalt mixtures were discussed based on the calculated results.     

大庆长垣以东古隆起天然气成藏条件的差异性

由长垣以东地区深层天然气分布特征，指出安达—肇州和朝阳沟—肇东古隆起是天然气运移指向和聚集的有利场所。造成安达—肇州古隆起上天然气显示好于朝阳沟—肇东古隆起上天然气显示，前者已获得了大量工业气流，而后者仅见少量气流或显示。但由于天然气在供气条件、储集条件、盖层条件、圈闭条件和运移条件上的差异，造成安达—肇州古隆起本身天然气显示也存在差异，昌德构造、卫星—升平构造和汪家屯构造天然气显示好于模范屯—肇州西构造天然气显示。     

Thermokinetics of Liquid-Liquid Reaction of Dy（NO3 ）3 with Histidine

The thermokinetics of liquid-liquid reaction of dysprosium nitrate with histidine were studied using a microcalorimeter. On the basis of experimental and calculated results, threethermodynamic parameters (the activation enthalpy, the activation entropy and the activation free enegy),the rate constant, three kinetic parameters (the activation energy, the pre-exponential constant and the reaction order) wereobtained. On the basis of thermodynamics and kinetics, the for marion reaction of the complex was discussed.     

催化裂化大油气管线阻焦剂的研究与开发

介绍了阻焦剂的阻聚分散机理，测定了不同组分的阻焦剂对不同性质原料的阻焦效果，并考察了不同加入浓度对阻焦率以及催化裂化产品分布的影响。试验结果表明：加入50—100μg/g的阻焦剂，可使催化裂化大油气管线阻焦率达到53．7％—63．8％，同时对产品分布及产品性质无不良影响，具有技术经济可行性。     

添加VC的TiB2基硬质材料研究

对添加VC的TiB2基硬质材料进行了研究。通过实验测定了硬度、横向断裂强度、高温强度以及耐磨性等性能，通过观察SEM照片研究了VC对TiB2基硬质材料组织结构的影响。综合各种指标，我们确定在TiB2-Fe—Mo硬质材料中VC的最佳添加量为0．5％。     

地方热电联产企业发展对策的探讨

介绍了泰州热电企业的运行情况，分析了各热电厂在技术改造、扩大热用户和强化内部考核管理方面的措施，探讨了地方热电企业应采取的对策和发展思路。     

煤气厂脱硫剂脱硫探讨

介绍了大同煤气厂H2S含量的现状、脱硫情况和脱硫剂的再生等问题，提出了解决的办法及一些设想。