用于频率合成器的低损耗声表面波滤波器

简述了产生声表面波滤波器插入损耗的主要机理和获得低损耗的原则；介绍了根据此原则对１００～５００ＭＨｚ５种滤波器的研制过程和结果。实验表明，采用镜像阻抗连接换能器结构可达到３～４ｄＢ的低损耗，并成功地应用于频率合成器中。     

Nd：MgO：LiNbO3晶体的荧光光谱及其双晶体腔内互倍频实验

采用激光感生荧光技术测量了Ｎｄ：ＭｇＯ：ＬｉＮｂＯ３晶体的偏振荧光光谱，简要地说明了Ｎｄ：ＭｇＯ：ＬｉＮｂＯ３双晶体腔内互倍频的基本原理，并在实验中用染料激光作泵浦源实现了其双晶体腔内互倍频运转；得到５４３ｎｍ横模倍频绿光单端输出约ＹＭＷ，腔前泵浦阈值约３８ＭＷ，总转换效率约为１．３％。     

三塘湖盆地上古生界烃源岩镜质组反射率异常研究

镜质组反射率是评价有机质成熟度的重要指标 ,然而由于地质因素和测试技术的原因 ,镜质组反射率测量值常与预计值有一定的偏差。在三塘湖盆地上古生界烃源岩中 ,可以观察到镜质组反射率的局部增强和镜质组反射率的抑制。局部增强多分布在上二叠统的烃源岩中 ,主要与火山活动有关。这种反射率的增强在平面上分布广泛 ,但纵向上影响范围较小。反射率的抑制是在上古生界烃源岩含有较高含量的腐泥组分背景下产生的。用氢指数模板方法对抑制进行了校正 ,抑制的幅度最大可达 0 .3%     

大口径管道带水抢修

包头地区1996年5月3日发生6.4级强烈地震,给包钢生产造成重大损失,地震发生后,包钢生产用动力系统发生多起事故.本文针对4#高炉工业回水管道(φ1220×10)震后发生断裂,如何在保证不停止生产的前提下,采取什么措施进行管道带水抢修进行了阐述,本文是经过现场抢修过程总结而来,对今后大口径管道带水抢修提供了宝贵的经验.     

Comparative severity of respiratory lesions of sialodacryoadenitis virus and Sendai virus infections in LEW and F344 rats

In several chronic diseases, lesions are more severe in LEW rats than in F344 rats. To determine whether or not acute viral diseases also are more severe in LEW rats than in F344 rats, we inoculated 6-7-week-old LEW and F344 rats with 10(7.2) cell culture infective units of sialodacryoadenitis virus or 10(4.7) infective units of Sendai virus. Twenty-four rats of each strain were given each virus. Lesions in nasal passages, tracheas, intrapulmonary airways, and pulmonary alveoli in 6 or 12 rats inoculated with each virus were assessed by scoring 5, 10, and 14 days after inoculation. Both viruses caused typical patchy necrotizing rhinitis, tracheitis, bronchitis, and bronchiolitis, with multifocal pneumonitis, in rats of both strains. Mean lesion indices for LEW rats given sialodacryoadenitis virus were significantly different from those for F344 rats for nasal passages on days 10 (0.999 vs. 0.680) and 14 (0.736 vs. 0.278), bronchi on day 5 (0.479 vs. 0.361), and alveoli on day 5 (0.677 vs. 0.275). Lesion indices for LEW rats given Sendai virus were significantly different from those for F344 rats for nasal passages on days 10 (1.000 vs. 0.611) and 14 (0.778 vs. 0.583); trachea on day 10 (0.625 vs. 0.028); bronchi on days 5 (0.476 vs. 0.331), 10 (0.123 vs. 0.013), and 14 (0.038 vs. 0); and alveoli on days 5 (0.413 vs. 0.114) and 10 (0.185 vs. 0.020). Thus, at the tested doses, both viruses caused more severe respiratory tract lesions in LEW rats than in F344 rats.     

Influence of lattice self-heating and hot-carrier transport ondevice performance

As device technologies improve, the traditional drift-diffusion transport model becomes inadequate to predict the performance of state-of-the-art semiconductor devices. The reasons are believed to be the larger field and field gradient inside advanced devices which cause lattice heating and hot carrier nonlocal transport phenomena. For more accurate prediction on device performance, a new device simulator capable of full thermodynamic simulation was developed. The carrier and carrier energy transport equations are directly derived from the Boltzmann transport equation, and the energy transfer among electrons, holes and crystal lattice takes into account most of the possible mechanisms. This simulator was used to simulate the DC behavior of a BJT and a half-micron NMOS. The simulation results show that for advanced devices, not only the drift-diffusion model becomes inadequate, but including only one of the two thermal effects results in error in simulated device characteristics     

T8钢—聚有机硅氧烷仿生减粘降阻复合涂层的特性

研究了Ｔ８钢－聚有机硅氧烷仿生减粘降阻复合涂层的表面润湿性，磨料磨损性及土壤的减粘降组性能，与金属材料相比，仿生复合涂层的表面憎水性显著提高，水在其表面上的接触角达９２°；与４５钢相比，其磨料磨损的体积相对耐磨系数为６３％，降阻率达１５．２２％－－２２．２７％。     

Preparation and characterization of polyurethane microcapsules containing n‐octadecane with styrene‐maleic anhydride as a surfactant by interfacial polycondensation

A series of polyurethane microcapsules containing a phase change material (PCM) of n‐octadecane was successfully synthesized by an interfacial polymerization in aqueous styrene‐maleic anhydride (SMA) dispersion with diethylene triamine (DETA) as a chain extender reacting with toluene‐2,4‐diisocyanate (TDI). The average diameter of microPCMs is in the range of 5–10 μm under the stirring speed of 3000–4000 rpm. Optical and SEM morphologies of microPCMs had ensured that the shell was regularly fabricated with the influence of SMA. FTIR results confirmed that the shell material was polyurethane and the SMA chains associated on core material reacted with TDI forming a part of shell material. The shell thickness was decreasing in the range of 0.31–0.55 μm with the molar ratio of DETA/TDI from 0.84 to 1.35 and the weight of core material increasing from 40 to 80% (wt %). By controlling the weight ratio of PCM as 40, 50, 60, 70, and 80% in microPCMs, it was found using DSC that the T_m and T_c of microPCMs were in the range of 29.8–31.0^oC and 21.1–22.0°C and an obvious phase change had been achieved nearly the same temperature range of that of PCM. The results from release curves of microPCM samples prepared by 1.4, 1.7, and 2.0 g of SMA indicated the release properties were affected by the amount of the dispersant, which attributed to the emulsion effect and shell polymerization structure. The above results suggest that the shell structure of microPCMs can be controlled and the properties of microPCMs determined by shell will perform proper practical usage. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4996–5006, 2006     

数字混沌扩频序列的盲估计

混沌序列具有非线性、宽带类噪声、大的码族、任意长的周期且容易产生的特性,因此在扩频通信系统中很有实用价值。本文将文献[1]中对伪随机扩频序列盲估计的方法推广应用到混沌扩频通信中,并对其不足提出了改进方法。在只知道扩频码周期而无其它任何先验知识的条件下,利用特征值分析的方法可以对数字混沌直扩序列进行盲估计,仿真实验证明了该方法的有效性。