Economics of liquid hydrogen from water electrolysis

Using the data from vendors and open literature, we have constructed a preliminary cost model to predict the cost of liquid hydrogen (LH₂) from water electrolysis. The model has been applied to two LH₂ plants. Both have a production rate of 10 886 kg day⁻¹. The first plant (Plant 1) consists of a tank-type electrolyzer and a liquefier and runs all day at the base-load (or equivalent base-load) power rate. The second (Plant 2) consists of a tank-type electrolyzer, a liquefier, a compressor, and storage vessels. The electrolyzer and the compressor shall run only during the off-peak hours at the off-peak power rate. However, the liquefier shall run all day at the base-load (or equivalent base-load) power rate. The costs of LH₂ from both plants are presented. Unless the base-load power rate is high and the off-peak power rate is substantially low, Plant 1 appears to be economically more feasible than Plant 2.     

An empirical formula for the prediction of rain attenuation infrequency range 0.6 - 100 GHz

An empirical formula for calculating the extinction cross section (ECS) by raindrops over a broad frequency range is first derived based on extensive calculations made on a widely varying in mean radius of modified Pruppacher and Pitter (MPP) raindrop models ranging from 0.25 to 3.5 mm. The expansion coefficients in the empirical formula are determined by least-squares curve fitting of numerical data obtained by the volume integral equation formulation (VIEF). The formula satisfies the frequency and raindrop size dependence. Numerical results obtained from the empirical formula for calculating the ECS are generally in good agreement with those calculated by the VIEF for raindrops with mean radius varying from 0.25 to 3.5 mm in the frequency range from 0.6 to 100 GHz. The average error in the ECS is less than 10%. The formula thus provides a simple and inexpensive method for calculating the ECS of raindrops, which otherwise requires complicated and expensive methods of calculation. By implementing this empirical formula of ECS into the rain attenuation equation, a new numerically empirical formula for calculating the specific rain attenuation is also proposed. The validity of the empirical formula for calculating the specific rain attenuation is also checked by comparing the obtained results of specific rain attenuation with those obtained from Li et al.'s (1995) solution, Yeo et al.'s (1993) measurement, and Olsen et al.'s (1978) power-law equation     

我国建筑涂料技术进步简评

从以下诸方面简述我国建筑涂料的技术进步:⑴新品种涂料的研制开发;⑵加强对配套材料及施工技术的研究;⑶超细填料在涂料中的应用;⑷计算机自动配色技术;⑸产品标准的修订;⑹建筑涂料的实用范围扩大。     

标准椅全身计数器对不同年龄组均匀体模源全能峰效率的刻度

本文介绍了用标准液体源均匀充入聚氯乙烯制的体模,刻度标准椅全身计数器〔φ8″×4″(NaI)〕的方法和结果。分别就代表6个年龄组的体模,测定了标准椅全身计数器对5种能量(364,637,898,1460和1836keV)γ射线的全能峰效率;给出了全能峰效率与γ射线能量和被测对象体重的关系曲线。     

秦山核电厂气载放射性释放的环境影响

本文评价了秦山核电厂气载放射性流出物对环境的影响。应用现场及风洞大气扩释实验结果和厂址周围的人口与食谱调查资料,估算了秦山核电厂在正常运行和事故条件下释放的气载放射性流出物对公众产生的个人有效剂量当量和集体有效剂量当量。计算结果表明,正常运行时厂址边界(0.5km)处的最大个人有效剂量当量为2.7×10~(-2)mSv/a,该剂量的大部分来自~(137)Cs 的食入(主要由地表湿沉积引起);80km 范围内的集体有效剂量当量为1.1人·Sv/a,归一化集体有效剂量当量为3.7人·Sv/GW(e)·a。文中还给出了事故情况下剂量估算结果。     

Efficient design/simulation algorithms for simultaneous switching noise in leadframe packages

 Two new modeling and simulation approaches for Simultaneous Switching Noise (SSN) are described and compared to “brute force” simulation by SPICE. Both simulation accuracy and simulation run-time are considered. The two new approaches are: 1) the “effective inductance” method, in which an approximate, very efficient method of extracting an SSN L _eff  is utilized; and 2) the “macromodel” method, in which the complex inductance network responsible for SSN is represented by only a few dominant poles in the frequency domain and the time domain response is obtained by an efficient convolution algorithm. Both approaches are shown to be accurate and fast, but only the effective inductance algorithm is robust in numerical convergence. Received: 19 March 1997 / Accepted: 25 March 1997     

提高振动放矿使用寿命的途径

振动放矿使用寿命的提高，是关系到该项技术能否进一步推广的关键，本文针对这一问题，着眼于实际存在的具体问题，结合多年的应用实践，分析了影响使用寿命的各种因素，按治本与治标相结合的原则，提出了提高使寿命的若干有效途径。     

A simple method for extracting average doping concentration in thepolysilicon and silicon surface layer near the oxide in polysilicon-gateMOS structures

The author demonstrates a simple technique that extracts average doping concentration in the polysilicon and silicon near the oxide in a metal/polysilicon/oxide/silicon system. The technique is based on the maximum-minimum capacitance method on two large area structures-one MOSFET and one MOSC (MOS capacitor). The technique is simple and reliable since only three data points in the C-V data are required-two points in MOSC C-V and one point in MOSFET C-V. The technique avoids inaccuracy caused by interface traps at the polysilicon/oxide and the oxide/silicon interface. The technique can be implemented into fab routine electric-test procedures for simultaneously monitoring change of doping concentration in polysilicon and silicon during process development     

Enhancement of oxide break-up by implantation of fluorine inpoly-Si emitter contacted p+-n shallow junctionformation

In this study, it is demonstrated that the incorporation of fluorine can enhance poly-Si/Si interfacial oxide break-up in the poly-Si emitter contacted p⁺-n shallow junction formation. The annealing temperature for breaking up the poly-Si/Si interfacial oxide has been found to be as low as 900°C. As a result, the junction depth of the BF₂-implanted device is much larger than that of the boron-implanted device