Programmable group-delay module using binary polarization switching

We demonstrate the first programmable group-delay module based on polarization switching. With a unique binary tuning mechanism, the device can generate any differential group delay value from -45 to +45 ps with a resolution of 1.40 ps, or any true-time-delay value from 0 to 45 ps with a resolution of 0.7 ps. The delay varying speeds for both applications are under 1 ms and can be as fast as 0.1 ms. We evaluate both the dynamic and static performances of the device while paying special attention to its dynamic figures of merit for polarization-mode dispersion emulation and compensation applications. Our experiment shows that the device exhibits a negligible transient-effect induced power penalty (<0.2 dB) in a 10-Gb/s nonreturn-to-zero system.     

Stabilization of singularly perturbed fuzzy systems

This paper presents some novel results for stabilizing singularly perturbed (SP) nonlinear systems with guaranteed control performance. By using Takagi-Sugeno fuzzy model, we construct the SP fuzzy (SPF) systems. The corresponding fuzzy slow and fast subsystems of the original SPF system are also obtained. Two fuzzy control designs are explored. In the first design method, we propose the composite fuzzy control to stabilize the SPF subsystem with H/sup /spl infin// control performance. Based on the Lyapunov stability theorem, the stability conditions are reduced to the linear matrix inequality (LMI) problem. The composite fuzzy control will stabilize the original SP nonlinear systems for all /spl epsiv//spl isin/(0,/spl epsiv//sup */) and the upper bound /spl epsiv//sup */ can be determined. For the second design method, we present a direct fuzzy control scheme to stabilize the SP nonlinear system with H/sup /spl infin// control performance. By utilizing the Lyapunov stability theorem, the direct fuzzy control can guarantee the stability of the original SP nonlinear systems for a given interval /spl epsiv//spl isin/[/spl epsiv/_,/spl epsiv/~]. The stability conditions are also expressed in the LMIs. Two SP nonlinear systems are adopted to demonstrate the feasibility and effectiveness of the proposed control schemes.     

Benzoquinones, a homoisoflavanone and other constitutents from Polygonatum alte-lobatum

From the rhizomes of Polygonatum alte-lobatum, two new homologous series of 1,4-benzoquinones, polygonaquinones A and B, a novel homoisoflavanone, a new gentrogenin glycoside and 13 known compounds were isolated and characterized. The structures of the new compounds were determined as two homologous series of three 2,5-dihydroxy-3-methyl-6-alkyl-1,4-benzoquinones and three 2-hydroxy-3-methyl-6-alkyl-1,4-benzoquinones, with chain lengths C21 to C23, and 4',5,7-trihydroxy-6,8-dimethylhomoisoflavanone and gentrogenin 3-O-beta-D-glucopyranosyl(1-->2)-[beta-D-xylopyranosyl(1-->3)] -beta-D-glucopyranosyl(1-->4)-beta-D-galactopyranoside.     

糖化酶制剂辐照性能研究

研究了工业糖化酶制剂经辐照处理后各项性能的变化。结果表明,经2kGy以下剂量的γ射线处理后,可提高其贮存稳定性,改善卫生品质,不影响其正常使用。     

Non-steady-state model for kinetics of free radical polymerization, 4. Direct thermal initiation

This paper deals with the non-steady-state kinetics of direct thermal initiated polymerization. The initiation is assumed to be a bimolecular reaction of the monomer. The relationship between the radical concentration and the monomer conversion is rigorously derived. In further treatment a few very close approximations are introduced based on the fact that the number of monomer molecules reacting in the initiation step is much less than that consumed in the propagation step for a process producing high polymer, and the value of the rate constant for propagation or chain transfer is much lower than that for chain termination. Expressions for various molecular parameters, such as molecular weight distribution, number-average and weight-average degrees of polymerization, and dispersity, are given. Several numerical examples are provided.     

Tandem repeating of the expression cartridge--a novel strategy to enhance the expression efficiency of cloned gene in Escherichia coli

The aim of this study was to determine the actual prevalence of diabetes mellitus and to investigate the contribution of various risk factors to the diabetes mellitus among the population in a methyl mercury polluted area. The study was a population based cross sectional mass screening survey. A case-control study was designed to estimate the role of various risk factors including methyl mercury exposure for diabetes mellitus. The study was confined to a small rural town 10 km north of Minamata City; 1,087 persons older than 40 years were examined. Measurement of glucose metabolism was made on the basis of urine and haematological examinations. Data on risk factors were collected by questionnaire, and by measurement of body height and weight (obesity). The prevalence rate of the diabetes mellitus was 8.4% in males and 5.3% in females. The odds ratio of family history was significantly higher, 4.63. The odds ratio of residential history in a methyl mercury high polluted area was 0.58. The prevalence of the diabetes mellitus in this methyl mercury polluted area was not increased, contrary to what was expected based on the pathological findings.     

神经网络离散变结构控制的算法及其应用

本文首次将自适应线性神经元（Ａｄａｌｉｎｅ）用于离散变结构控制。以滑模面Ｓ（ｋ）＝０作为Ａｄａｌｉｎｅ元的希望输出，作为Ａｄａｌｉｎｅ元的实际输出，通过ＬＭＳ算法在线调整权值可保证滑态可达条件的满足。应用所提出的控制策略对泵控马达速度伺服系统进行控制，仿真表明控制效果是令人满意的。     

Agreement between a frequency-weighted filter for continuous biomechanical measurements of repetitive wrist flexion against a load and published psychophysical data

A previous pilot study demonstrated that a force and frequency-weighted filter network could be developed for processing continuous biomechanical measures of repetitive wrist motions and exertions. The current study achieves the objective by modelling subjective discomfort for repetitive wrist flexion using controlled posture, pace and force. A three-level fractional factorial experiment was conducted involving repetitive wrist flexion (2 s/motion, 6 s/motion, 10 s/motion) from a neutral posture to a given angle (10 degrees, 28 degrees, 45 degrees) against a controlled resistance (5 N, 25 N, 50 N) using a Box Behnken design. Ten subjects participated. Discomfort was reported on a 10 cm visual analogue scale. Results of response surface regression analysis revealed that main effects of force, wrist flexion angle, and repetition were all significant (p < 0.05) and that no second-order effects were observed. Linear regression analysis on these factors established a discomfort model on which the filter characteristics were based. The pure error test model revealed no significant lack of fit (p > 0.05). The continuous model was compared and agreed with discrete psychophysical data from other published studies. The model was used for generating parameters for a force and frequency-weighted digital filter that weighs continuous wrist postural signals with corresponding force in proportion to the equal discomfort function as a function of frequency of repetition. These filters will enable integration of large quantities of biomechanical data in field studies.