利用测井新技术重新评价文46断块潜力

利用碳氧比测井和注硼中子寿命测井对文46断块的油水层进行了定性、定量解释方法的研究和探讨，建立了含油饱和度计算模型，确定了油水层的解释标准，并对该断块进行了全面的精细解释，利用测井与地质相结合的综合方法落实了解释成果的可靠性。     

焦化汽油加氢试生产重整原料的技术分析

在0.6Mt/a柴油加氢精制装置上利用焦化汽油为原料进行重整原料油的试生产，改善了焦化汽油的性质，降低了硫，氮和可导致重整催化剂中毒的金属含量及烯烃含量，提高了饱和烃的含量，生产出了合格的重整原料，该技术拓宽了重整原料来源，较好地解决了焦化汽油的出路问题。     

管道防腐层的失效及对策

介绍了管道防腐层失效的原因和方式。指出水和氧气是防腐层失效的原因,含水量和含氧量决定腐蚀程度,应采取有效措施对防腐层进行及时检查与修复。     

深基坑土钉支护的有限元分析

本文阐述了土钉支护的发展简史，针对济南济享大厦土钉支护开挖深基坑进行有限元分析并取得较准确的结果，说明在深基坑土钉支护设计中应注意的问题．     

转炉溅渣层与镁碳砖炉衬的结合机理

通过对生产现场带有溅渣层的转炉炉衬残砖和试验室小型坩埚溅渣试验结果进行矿相显微结构分析、研究，确定了溅渣层的矿相组成、溅渣层与ＭｇＯ－Ｃ砖结合区域的矿相结构及坩埚溅渣层自上而下的矿相分布规律，并根据矿相结构分析中观察到的烧结层、结合层和溅渣层３个区域，提出了溅渣层与镁碳砖炉衬的结合机理为化学结合、机械镶嵌与化学烧结结合及冷凝结合３种形式。     

NUMERICAL STUDY ON QUASI- STEADY FLOW OF NONNEWTONIAN FLUID IN SUCK-ROD PUMP

This paper presents a numerical method for simulation of the flow and thecalculated results of the quasi-steady axisymmetrical flow field and pressure distribution on valveball with power-law model for Non-Newtonian fluid in suck-rod pump.We believe the methodcan provide a foundation for further research and improvement of the design of suck-rod pump.     

溶质原子在再结晶运动晶界上偏聚的研究

Ｂ~（１０）（ｎ，α）Ｌｉ~７裂变反应的径迹显微照相技术被用来研究含硼Ｆｅ－３０％Ｎｉ合金高温热变形再结晶过程中硼在晶界上的偏聚行为，实验表明，含硼Ｆｅ－３０％Ｎｉ合金１０００℃热变形２０％再结晶过程中，运动晶界前方发生硼偏聚而后方发生贫硼现象，而在静止晶界上看不到硼偏聚，随着再结晶新晶粒的长大，运动晶界上的硼偏聚变弱。本文提出，可以用晶界对溶质原子热运动散射的量子理论来解释溶质原子在运动晶界上的偏聚现象。     

套管动力钳转矩监测系统

下套管作业时，套管螺纹联接质量的好坏直接影响着油井寿命，因此有必要研制一种套管动力钳转矩监测系统。以目前国内常用的ＴＱ－２０型套管动力钳为例，介绍了一种与之相配套的套管钳转矩监测系统的功能特点，测试原理，结构设计，并对实测各类紧扣曲线进行了分析。该系统采用主从机结构，主机为工业控制微机，从机为单片机系统，主从机采用远距离通信传输，大大地改善了工业控制微机的工况条件。该系统实现无人监控、自动记录、绘     

The summary of researches on ADS in China

The conceptual study on the accelerator driven system (ADS) that lasted for about five years ended in 1999 in China. As one project of the National Basic Research Program of China (973 Program) in the energy domain, which is sponsored by the China Ministry of Science and Technology (MOST), a five-year-program of fundamental research of ADS physics and related technology was launched in 2000 and passed national review at the end of 2005. The China Institute of Atomic Energy (CIAE), the Institute of High Energy Physics (IHEP), the Institute of Heavy Ion Physics in Peking University (PKU-IHIP) and other institutions jointly carried out the research. The research activities were focused on HPPA physics and technology, reactor physics of external source driven sub-critical assembly, nuclear data base and material study. For HPPA, a high current injector consisting of an ECR ion source, LEBT and an RFQ accelerating structure of 3.5 MeV was built. In reactor physics study, a series of neutron multiplication experimental study has been carried out and still being done. The VENUS facility has been constructed as the basic experimental platform for neutronics study in ADS blanket. It’s a zero power sub-critical neutron multiplying assembly driven by external neutron produced by a pulsed neutron generator. The theoretical, experimental and simulation study on nuclear data, material properties and nuclear fuel circulation related to ADS is carrying on to provide the database for ADS system analysis. The main results on ADS related researches will be reported.     

矩形橡胶复合材料层合板几何非线性分析

文中应用简单高阶剪切层合理论和大变形理论对各向异性纤维增强的矩形橡胶复合材料层合板进行了几何非线性分析.与线性理论相比,本文作者进行的层合板大变形状态的几何非线性分析和所计算的层板应力分布,更具有准确性.