计算机技术在档案管理中的运用浅析

随着信息技术的快速发展,计算机技术在人们的日常生活与工作中发挥着越来越重要的作用,对于档案管理工作来言也是如此.本文首先分析了计算机技术在档案管理中运用的必要性,然后分析、总结了目前计算机技术在档案管理中的一些具体运用及其运用过程中存在的问题,并在文章最后提出了几点加强计算机技术在档案管理工作中运用的对策与建议.     

浅谈LED电子显示屏在幕墙系统中的应用

随着计算机技术、光学、电子技术、视频技术、传送技术的发展,各种电子屏幕设备的应用日益增多.在众多的影像设备中,LED电子显示屏是集光电子技术、视频技术、计算机技术和微电子技术为一体的科技产品.LED因其强大的功能在各行各业中得到了广泛的应用.     

A novel fault-tolerant execution model by using of mobile agents

The exponential expansion of the Internet and the widespread popularity of the World Wide Web give a challenge to experts on reliable and secure system design, e.g., e-economy applications. New paradigms are on demand and mobile agent technology is one of the features. In this paper, we propose a fault-tolerance execution model by using of mobile agents, for the purpose of consistent and correct performance with a required function under stated conditions for a specified period of time. Failures are classified into two classes based on their intrinsic different effects on mobile agents. For each kind of failure, a specified handling method is adopted. The introduction of exceptional handling method allows performance improvements during mobile agents’ execution. The behaviors of mobile agents are statistically analyzed through several key parameters, including the migration time from node to node, the life expectancy of mobile agents, and the population distribution of mobile agents, to evaluate the performance of our model. The analytical results give new theoretical insights to the fault-tolerant execution of mobile agents and show that our model outperforms the existing fault-tolerant models. Our model provides an effective way to improve the reliability of computer systems.     

Stability of three-dimensional metallic glass Ni68B21Si11

Under isothermal and linear heating conditions, the thermal stability of the three-dimensional metallic glass Ni₆₈B₂₁Si₁₁, produced by rapid quenching of the denucleated melt (RQDM), has been systematically studied using PE DSC7 differential scanning calorimetry in relation to denucleation of liquid alloy prior to rapid quenching, pre-anneal treatment of amorphous specimens, and cooling rate. The following results were observed. First, the thermal stability of metallic glass prepared by RQDM is obviously enhanced because of the removal of pre-existing nuclei in advance. This is substantiated by the experimental data showing that the projected life of three-dimensional metallic glass Ni₆₈B₂₁Si₁₁ is increased by an order of magnitude at 400 K. Secondly, pre-anneal treatment of the amorphous alloy leads to a reduction of temperature for the onset of crystallization,T _x, and crystallization heat, H. Finally, quenching rates have little effect on the thermal stability of amorphous alloys.     

Surface Control and Electrical Tuning of MXene Electrode for Flexible Self-Powered Human–Machine Interaction

MXene materials emerge as promising candidates for energy harvesting and storage application. In this study, the effect of the surface chemistry on the work function of MXenes, which determines the performance of MXene-based triboelectric nanogenerator (TENG), is elucidated. First-principles calculations reveal that the surface functional group greatly influences MXene work function:  OH termination reduces the work function with respect to that of bare surface, while  F and  Cl increase it. Then, work functions are experimentally determined by Kelvin probe force microscopy. The MXene prepared by gentle etching at 40 °C for 48 h (GE_40/48) has the largest work function. Furthermore, an electron-cloud potential-well model is established to explain the mechanism of electron emission-dominated charge transfer and assemble a triboelectric device to verify experimentally its conclusions. It is found that GE_40/48 has the best performance with a 281 V open-circuit voltage, 9.7 µA short-current current, and storing 1.019 µC of charge, which is consistent with the model. Last, a patterned TENG is demonstrated for self-powered human–machine interaction application. This finding enhances the understanding of the inherent mechanism between the surface structure and the output performance of MXene-based TENG, which can be applied to other TENG based on 2D materials.     

Proximity-Induced Fully Ferromagnetic Order with Eightfold Magnetic Anisotropy in Heavy Transition Metal Oxide CaRuO3

Ferromagnetic materials with a strong spin-orbit coupling (SOC) have attracted much attention in recent years because of their exotic properties and potential applications in energy-efficient spintronics. However, such materials are scarce in nature. Here, a proximity-induced paramagnetic to ferromagnetic transition for the heavy transition metal oxide CaRuO₃ in (001)-(LaMnO₃/CaRuO₃) superlattices is reported. Anomalous Hall effect is observed in the temperature range up to 180 K. Maximal anomalous Hall conductivity and anomalous Hall angle are as large as ∼15 Ω⁻¹ cm⁻¹ and ∼0.93%, respectively, by one to two orders of magnitude larger than those of the typical 3d ferromagnetic oxides such as La_0.67Sr_0.33MnO₃. Density functional theory calculations indicate the existence of avoid band crossings in the electronic band structure of the ferromagnetic CRO layer, which enhances Berry curvature thus strong anomalous Hall effects. Further evidences from polarized neutron reflectometry show that the CaRuO₃ layers are in a fully ferromagnetic state (∼0.8 μ_B/Ru), in sharp contrast to the proximity-induced canted antiferromagnetic state in 5d oxides SrIrO₃ and CaIrO₃ (∼0.1 μ_B/Ir). More than that, the magnetic anisotropy of the (001)-(LaMnO₃/CaRuO₃) superlattices is eightfold symmetric, showing potential applications in the technology of multistate data storage.     

Stubborn state estimation for complex-valued neural networks with mixed time delays: the discrete time case

Neural Computing and Applications - In this paper, the state estimation problem is investigated for a class of discrete-time complex-valued neural networks (CVNNs) with mixed time delays. We...     

卫星USB测控副载波同步算法研究

吉林一号卫星测控采用USB测控体制,遥控接收采用FFT+DPLL1+DPLL2的架构,FFT主要实现对载波的粗捕,DPLL1在FFT的基础上实现对载波相位的精跟踪,DPLL2实现副载波的跟踪。对遥控副载波跟踪所用到的数字PLL技术进行了研究,首先给出了载波多普勒折算到副载波上的方法,然后对模拟PLL数字化进行了详细的论述,并设计了遥控副载波同步用的PLL2,对其稳定性、快捕带及快捕时间、捕获带和捕获时间、同步速率等进行了分析和仿真。结果表明,该方法具有捕获时间短、跟踪精度高、稳定性好等特点,易于数字化实现,已成功在吉林一号系列卫星中得到应用。     

Joint Classification and Regression for Visual Tracking with Fully Convolutional Siamese Networks

International Journal of Computer Vision - Visual tracking of generic objects is one of the fundamental but challenging problems in computer vision. Here, we propose a novel fully convolutional...     

A modified teaching–learning-based optimisation algorithm for bi-objective re-entrant hybrid flowshop scheduling

In this paper, a modified teaching–learning-based optimisation (mTLBO) algorithm is proposed to solve the re-entrant hybrid flowshop scheduling problem (RHFSP) with the makespan and the total tardiness criteria. Based on the simple job-based representation, a novel decoding method named equivalent due date-based permutation schedule is proposed to transfer an individual to a feasible schedule. At each generation, a number of superior individuals are selected as the teachers by the Pareto-based ranking phase. To enhance the exploitation ability in the promising area, the insertion-based local search is embedded in the search framework as the training phase for the TLBO. Due to the characteristics of the permutation-based discrete optimisation, the linear order crossover operator and the swap operator are adopted to imitate the interactions among the individuals in both the teaching phase and the learning phase. To store the non-dominated solutions explored during the search process, an external archive is used and updated when necessary. The influence of the parameter setting on the mTLBO in solving the RHFSP is investigated, and numerical tests with some benchmarking instances are carried out. The comparative results show that the proposed mTLBO outperforms the existing algorithms significantly.