The destabilization of an erodible sediment bed by a reproducible impulsive phenomenon is studied experimentally.For this,a specific setup is designed to produc... 相似文献
The Iseult MRI is an actively shielded whole-body magnet providing a homogeneous and stable magnetic field of 11.7 T. After nearly 20 years of research and development, the magnet successfully reached its target field strength for the first time in 2019. This article reviews its commissioning status, the gradient–magnet interaction test results and first imaging experience.
Materials and methods
Vibration, acoustics, power deposition in the He bath, and field monitoring measurements were carried out. Magnet safety system was tested against outer magnetic perturbations, and calibrated to define a safe operation of the gradient coil. First measurements using parallel transmission were also performed on an ex-vivo brain to mitigate the RF field inhomogeneity effect.
Results
Acoustics measurements show promising results with sound pressure levels slightly above the enforced limits only at certain frequency intervals. Vibrations of the gradient coil revealed a linear trend with the B0 field only in the worst case. Field monitoring revealed some resonances at some frequencies that are still under investigation.
Discussion
Gradient-magnet interaction tests at up to 11.7 T are concluded. The scanner is now kept permanently at field and the final calibrations are on-going to pave the road towards the first acquisitions on volunteers.
Photoelectrodes nanoscale interface design has become a key factor to enhancing their photoelectrochemical performance for water splitting by reducing the photogenerated charge recombination, thus ensuring their efficient separation, transport, and collection. In this work, hematite (α-Fe2O3) photoanodes were prepared from a simple and scalable methodology capable of synergistically mitigating the charge loss and recombination at all interfaces (i.e., fluorine-doped tin oxide/hematite, hematite/hematite, and hematite/electrolyte) and achieving overall efficiency of ∼50% for the water oxidation reaction compared to pristine photoelectrodes. The external quantum efficiency at 1.23 V versus reversible hydrogen electrode of pristine hematite was enhanced 6.7 times with the modifications of the three interfaces (Al2O3/NbH/NiFeOx). Electrochemical impedance spectroscopy and intensity-modulated photocurrent spectroscopies were applied to probe and monitor the photogenerated charge carrier dynamics revealing a substantial improvement in charge separation and collection at the back-contact interface as well as a partial mitigation of the surface states at the hematite–electrolyte interface. 相似文献
Silicon phthalocyanines (R2-SiPcs) are a family of promising tunable materials for organic electronic applications. We report the chemistry of the synthesis of axially substituted fluorinated SiPcs (tb-Ph)2-FxSiPc (where X = 0, 4, 8, or 16) and explore how the degree of fluorination effects optical and electronic properties. A new treatment with boron trichloride was included to obtain Cl2-FXSiPcs from F2-FXSiPcs, activating the axial position for further functionalization. We observed that as the degree of fluorination increased, so did the electron affinity of the compounds, leading to a drop in frontier orbital levels, as measured by electrochemistry and ultraviolet photoelectron spectroscopy (UPS). The deeper energy levels enabled successful (tb-Ph)2-F4SiPc and poly [[6,7-difluoro[(2-hexyldecyl)oxy]-[5,8-quinoxalinediyl]-2,5-thiophenediyl]] (PTQ10) blends for organic photovoltaics and photodetectors. All four compounds were incorporated in organic thin-film transistors (OTFTs), where the degree of fluorination influenced device operation, changing it from p-type conduction for (tb-Ph)2-F0SiPc, to ambipolar for (tb-Ph)2-F4SiPc, and n-type for (tb-Ph)2-F8SiPc and (tb-Ph)2-F16SiPc. The OTFT devices made with (tb-Ph)2-F16SiPc achieved a low average threshold voltage of 7.0 V in N2 and retained its n-type mobility when exposed to air. 相似文献
Stimulation of cells with electrical cues is an imperative approach to interact with biological systems and has been exploited in clinical practices over a wide range of pathological ailments. This bioelectric interface has been extensively explored with the help of piezoelectric materials, leading to remarkable advancement in the past two decades. Among other members of this fraternity, colloidal perovskite barium titanate (BaTiO3) has gained substantial interest due to its noteworthy properties which includes high dielectric constant and excellent ferroelectric properties along with acceptable biocompatibility. Significant progression is witnessed for BaTiO3 nanoparticles (BaTiO3 NPs) as potent candidates for biomedical applications and in wearable bioelectronics, making them a promising personal healthcare platform. The current review highlights the nanostructured piezoelectric bio interface of BaTiO3 NPs in applications comprising drug delivery, tissue engineering, bioimaging, bioelectronics, and wearable devices. Particular attention has been dedicated toward the fabrication routes of BaTiO3 NPs along with different approaches for its surface modifications. This review offers a comprehensive discussion on the utility of BaTiO3 NPs as active devices rather than passive structural unit behaving as carriers for biomolecules. The employment of BaTiO3 NPs presents new scenarios and opportunity in the vast field of nanomedicines for biomedical applications. 相似文献
This study evaluates the efficiency of the inactivation of Escherichia coli K12, entrapped within calcium alginate gel, by microwave processing compared to a conventional approach i.e. by heating in a water bath. Microbial thermal inactivation equations coupled with heat transfer and Maxwell’s equations are integrated into a 3D Finite Elements model under dynamic heating conditions. Water bath microbial inactivation experimental data are exploited for performing parameter identification of a non-linear microbial model, and the Calcium alginate gel’s dielectric properties were numerically estimated. The coupled model provides a very good fitting to the experimental results. The simulation have shown uneven temperature distribution during microwave heating which may interpret its lower inactivation efficiency comparing to the conventional water bath treatment. This study also demonstrates the reliability of the coupled modeling approach to estimate the efficiency of the microbial inactivation, despite the thermal heterogeneity inherent in the microwave treatment. 相似文献