滚齿加工齿轮误差的矢量法分析

从共轭原理角度出发，采用矢量法分析了运动偏心下滚齿加工轮齿的本质，阐明了有运动偏心的情况下，滚切出的齿形是有误差的渐开线齿形。     

Oxidation and Crack Healing Behavior of a Fine‐Grained Cr2AlC Ceramic

This work reports the oxidation and crack healing behavior of a fine‐grained (~2 μm) Cr₂AlC MAX phase ceramic. The oxidation behavior was investigated in the temperature range 900°C–1200°C for times up to 100 h. The material showed a good oxidation resistance, owing to the formation of a dense and thin α‐Al₂O₃ layer. The microstructure, composition and thickness of the oxide scale were characterized. Its oxidative crack healing behavior as a function of temperature, healing time, and initial crack size was studied systematically. The material showed excellent healing behavior. The main crack healing mechanism is the filling of the crack by oxides well adhering to the crack faces. The crack geometry before and after healing was characterized by X‐ray tomography. Three‐point bend tests showed the dependence of strength recovery at 1100°C as a function of initial crack length and healing time.     

复合材料综合信息查询系统的研究

信息、生物技术和新材料已成为2l世纪最重要、最有发展潜力的领域。复合材料的发展同样也面临着巨大的机遇和挑战。随着市场环境的不断变化，其信息量也在日趋复杂。在信息处理方面，不仅要求其准确性、完整性．更要求其时效性，传统的手工处理方式难以胜任这一要求，本文正是基于这一前提，将我国玻璃钢事业四十年来所取得的丰硕成果与计算机技术相结合，研制开发了功能较齐全的复合材料综合信息查询系统。     

中铝瓷球的应用研究

本文以长石、粘土、矾土等天然矿物原料,采用可塑法成型工艺,研究了配方与烧结温度、瓷球密度、外观颜色的关系,研制成功了成本低、密度大、外观质量较好的中铝瓷球的较佳配方,并解决了瓷球生产中的关键工艺技术问题。     

Synthesis and properties of organosoluble polyimide/clay hybrids

A soluble polyimide prepared from 7,7′‐bis(4‐aminophenoxy)‐4,4,4′,4′‐tetramethyl‐2,2′‐spirobichroman and 4,4′‐hexafluoroisopropylidenediphthalic anhydride was mixed with organo‐modified montmorillonite or synthetic mica in N,N‐dimethylacetamide. The content of the clay minerals was 1, 2, and 4 wt %, respectively. Transparent, flexible, and tough films could be cast from the hybrid solutions. The hybrid films were characterized with wide‐angle X‐ray scattering (WAXS), transmission electron microscopy, thermomechanical analysis, thermogravimetric analysis, and differential scanning calorimetry. The WAXS results revealed that the montmorillonite was dispersed more homogeneously than the synthetic mica in the polyimide matrix. In both polyimide/clay hybrids the addition of clay caused thermal expansion coefficients to decrease, and the thermal stability was slightly enhanced. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2067–2072, 2001     

A novel route for synthesis of alumina–chromium carbide composites from PTFE-activated Cr2O3/Al/C combustion

Fabrication of alumina-chromium carbide composites was investigated by PTFE-activated Cr₂O₃/Al/C combustion synthesis. PTFE was employed as not only a reaction promoter, but a carburizing agent. Three reaction systems were prepared with different contents of carbon for the synthesis of Cr₂₃C₆, Cr₇C₃, and Cr₃C₂. The amounts of PTFE were selected to ensure combustion synthesis in the SHS (self-propagating high-temperature synthesis) mode and to provide carbon in quantities of 15 and 25?mol% of the total carbon. Experimental results showed that the combustion wave velocity and temperature decreased with increasing carbon, but increased with PTFE. A correlation between combustion wave velocity and temperature contributed to determination of the activation energy E_a =?89.15?kJ/mol for the combustion reaction. The increase of PTFE also improved formation of chromium carbides. As a result, the Cr₂₃C₆– and Cr₇C₃–Al₂O₃ composites were produced with almost no impurities. Due to a loss of carbon in carbothermic reduction, the Cr₃C₂–Al₂O₃ composite was obtained with Cr₇C₃ as the secondary carbide. SEM micrographs and DES analyses indicated that spherical carbide grains with a size of 0.5–3.0 μm were synthesized.     

Curing and pyrolysis of cresol novolac epoxy resins containing [2‐(6‐oxido‐6H‐dibenz(c,e)(1,2)oxaphosphorin‐6‐yl)‐1,4‐naphthalenediol]

This study investigates the curing kinetics, thermal properties and decomposition kinetics of cresol novolac epoxy (CNE) with two curing agents, 2‐(6‐oxido‐6H dibenz(c,e)(1,2) oxaphosphorin‐6‐yl)‐1,4‐benzenediol (ODOPN), and phenol novolac (PN). In comparison with the conventional PN system, introducing ODOPN, a phosphorus‐containing bulky pendant group, into CNE increases T_g by 33°C, char yield from 30% to 38%, and LOI from 22 to 31. The DSC curing study reveals that the E_a of the CNE/ODOPN epoxy can be obtained by Kissinger's method. The resulting E_a values indicate that the catalytic effect of EMI is insignificant on CNE/ODOPN but is marked on CNE/PN, whose E_a was reduced from 131.5 to 75.6 KJ/mole. This result may be caused by the fact that the symmetric diol attached to the 1 and 4 positions of the naphthalene ring in ODOPN sets up a steadily resonating structure and inhibits the catalytic action. Further investigating the conversion ratio with curing temperature yielded experimental data that agreed closely with Kaiser's model. The orders of the autocatalyzed reaction, m, and the crosslinking reaction, n, are close to 0.5 and 1.0, respectively, independently of the scan rate. Finally, the TGA decomposition study by Ozawa's method demonstrates that the mean E_a declines with the phosphorus content, because the easy decomposition of the phosphorus compound in the initiation stage facilitates the formation of an insulating layer. However, results in this study further reveal an increasing tendency for E_a with decomposition conversion for an ODOPN/PN mixture with the ODOPN content of over 50%, probably because of the retardation of gas diffusion by the insulating layer of phosphorus compound.     

Effects of mechanical milling on preparation and properties of CuAl1−xFexO2 thermoelectric ceramics

CuAl_1?xFe_xO₂ (x = 0, 0.1, and 0.2) thermoelectric ceramics produced by a reaction-sintering process were investigated. Pure CuAlO₂ and CuAl_0.9Fe_0.1O₂ were obtained. Minor CuAl₂O₄ phase formed in CuAl_0.8Fe_0.2O₂. Addition of 10 mol% Fe lowered the sintering temperature obviously and enhanced the grain growth. At x = 0.1, electrical conductivity = 3.143 Ω^?1 cm^?1, Seebeck coefficient = 418 μV K^?1, and power factor = 5.49 × 10^?5 W m^?1 K^?2 at 600 °C were obtained. The reaction-sintering process is simple and effective in preparing CuAlO₂ and CuAl_0.9Fe_0.1O₂ thermoelectric ceramics for applications at high temperatures.     

Mitochondrial Dysfunction and Oxidative Stress Promote Apoptotic Cell Death in the Striatum via Cytochrome c/Caspase-3 Signaling Cascade Following Chronic Rotenone Intoxication in Rats

Parkinson's disease (PD) is a progressive neurological disorder marked by nigrostriatal dopaminergic degeneration. Evidence suggests that mitochondrial dysfunction may be linked to PD through a variety of different pathways, including free-radical generation and dysfunction of the mitochondrial Complex I activity. In Lewis rats, chronic systemic administration of a specific mitochondrial Complex I inhibitor, rotenone (3 mg/kg/day) produced parkinsonism-like symptoms. Increased oxidized proteins and peroxynitrite, and mitochondrial or cytosol translocation of Bim, Bax or cytochrome c in the striatum was observed after 2-4 weeks of rotenone infusion. After 28 days of systemic rotenone exposure, imunohistochemical staining for tyrosine hydroxylase indicated nigrostriatal dopaminergic neuronal cell degeneration. Characteristic histochemical (TUNEL or activated caspase-3 staining) or ultrastructural (electron microscopy) features of apoptotic cell death were present in the striatal neuronal cell after chronic rotenone intoxication. We conclude that chronic rotenone intoxication may enhance oxidative and nitrosative stress that induces mitochondrial dysfunction and ultrastructural damage, resulting in translocation of Bim and Bax from cytosol to mitochondria that contributes to apoptotic cell death in the striatum via cytochrome c/caspase-3 signaling cascade.     

A simple and effective process for fabrication of Gd0.1Ce0.9O1.95 solid electrolyte ceramics

Ce_0.9Gd_0.1O_1.95 ceramics were prepared using a simple and effective process in this study. Without any prior calcination, the mixture of raw materials was pressed and sintered directly. The reaction of the raw materials occurred during the heating up period by passing the calcination stage in the conventional solid-state reaction method. More than 99.5% of theoretical density was obtained for Ce_0.9Gd_0.1O_1.95 sintering at 1500–1600 °C. Fine grains (<1 μm) formed in pellets sintered at 1450 °C. The homogeneity of grains increased with the sintering temperature. The grains grew to >4.5 μm in pellets sintered at 1600 °C. The reactive-sintering process is proved to be a simple and effective method in preparing Ce_0.9Gd_0.1O_1.95 ceramics for solid electrolyte application.