Multiple surface plasmon resonances and near-infrared field enhancement of gold nanowells

Arrays of Au nanowells (NWs) were fabricated by electron-beam lithography (EBL) and characterized by surface plasmon resonance (SPR) and surface-enhanced Raman scattering (SERS). It is revealed that these Au NW arrays exhibit multiple SP resonances that can be tuned by adjusting the geometrical characteristics of the NWs. SERS activity of Au NWs was confirmed for a range of excitation wavelengths and a number of model compounds including rhodamine 6G (R6G), phthalazine, and single-stranded oligonucleotides. According to numerical simulations based on the discrete dipole approximation (DDA), SERS enhancement originates from high electromagnetic fields (hot spots) localized both inside and outside individual NWs. In addition, far-field intercoupling effects between NWs have been observed experimentally in arrays with subwavelength pitch sizes. We show that the SERS enhancement factors can also be tuned and optimized by adjusting the geometry of NWs.     

Influence of composition and particle size on spin dynamics and thermodynamic properties of magnetoresistive perovskites

The thermodynamic behavior and spin dynamics of the colossal magnetoresistive (CMR) perovskites of general formula La(1-x)(A)xMn(1-y)(B)yO3 (where A is an alkaline earth, and B = Al, In) have been studied in order to evidence the effect of composition and the influence of nanocrystallinity on the thermodynamic and magnetic characteristics. By using electron paramagnetic resonance (EPR) spectroscopy, the behavior of the exchange coupling integral (J) between Mn spins and the polaron activation energy (Ea) have been investigated. The thermodynamic properties represented by the relative partial molar free energies, enthalpies and entropies of oxygen dissolution in the perovskite phase, as well as the equilibrium partial pressures of oxygen have been obtained by using solid electrolyte electrochemical cells method. The influence of the oxygen stoichiometry change on the thermodynamic properties was examined using the data obtained by a coulometric titration technique coupled with measurements of the electromotive force (EMF). The results were correlated with the average Mn valence values as determined by redox titration. The properties of the rare-earth manganites are strongly affected by the A- and B-site substitution and by the oxygen nonstoichiometry. New features related to the modifications in properties connected with the nanocrystalline state were evidenced. The correlation existing between the magnetic and thermodynamic characteristics were discussed in relation to significant changes in the overall concentration of defects.     

Chemical and Mechanical Characterization of AISI 304 and AISI 1010 Laser Welding

This paper addresses to the dissimilar laser welding of AISI 304 and AISI 1010 steel thin sheets. Cracks-free dissimilar edge fillet welds have been conducted using a Nd:YAG laser. Geometrical, microstructural, chemical, and mechanical proprieties of the welds were investigated using electron microscopy, EDS and tensile test assisted by digital image correlating. The proper results were achieved at an energy density of 88 J/mm² using a 0.4 mm laser spot diameter. An austenite-ferrite structure characterizes the weld bead and the precipitation of the chromium carbide at the grain limits was observed in the heat affected zone. Good tensile behavior was obtained; dissimilar joint was fractured on the carbon steel side at 482 MPa and 0.35 stain.     

Effect of oxidation on the chemical nature and distribution of low-temperature pyrolysis products from bituminous coal

Two bituminous coals, a high volatile Eastern Canadian and a medium volatile Western Canadian, were used to investigate the effect of oxidation on yields and chemical composition of gases, liquids and chars produced during coal pyrolysis. Pyrolysis experiments were performed at 500 °C using the Fischer assay method. Mild oxidation of coals resulted in a decrease of liquid hydrocarbon yields. Further coal oxidation increased the proportion of aromatic carbon in liquid products as determined by n.m.r., and also increased the content of oxygen in liquid products. The content of oxygen in chars was markedly lower than in corresponding coals. An attempt is made to explain reactions occurring during oxidation and subsequent pyrolysis of coal on the basis of differences in chemical composition of gases, liquids and chars.     

Novel Synthesis Route for Chitosan-Coated Zinc Ferrite Nanoparticles as Potential Sorbents for Wastewater Treatment

Magnetic chitosan–zinc ferrite (ChZnF) composites were proposed as potential adsorbents due to their appropriate physical characteristics and facile separation under external magnetic fields. The magnetic component (ZnFe₂O₄) was prepared by the sol–gel autocombustion method that yields nanometric spinel compounds with narrow size distribution and with low energy consumption. A certain amount of magnetic powder was dispersed consecutively by ultrasonication in a chitosan-PEG (polyethylene glycol) mixture, in order to obtain the desired nanocomposite. The as-obtained materials were characterized by FT-IR (Fourier transform infrared spectroscopy), XRD (X-ray diffraction), TEM (transmission electron microscopy), small-angle X-ray scattering, and Brunauer–Emmett–Teller test measurements. Finally, the chitosan-ferrite nanomaterial was successfully tested in simulated wastewater treatments. Different kinetic and equilibrium models have been fitted by nonlinear regression to analyze the adsorption data.     

Suction-enhanced siphon valves for centrifugal microfluidic platforms

In traditional centrifugal microfluidic platforms pumping is restricted to outward fluid flow, resulting in potential real estate issues for embedding complex microsystems. To overcome the limitation, researchers utilize hydrophilic channels to force liquids short distances back toward the disk center. However, most polymers used for CD fabrication are natively hydrophobic, and creating hydrophilic conditions requires surface treatments/specialized materials that pose unique challenges to manufacturing and use. This work describes a novel technology that enjoys the advantages of hydrophilic fluidics on a hydrophobic disk device constructed from untreated polycarbonate plastic. The method, termed suction-enhanced siphoning, is based on exploiting the non-linear hydrostatic pressure profile and related pressure drop created along the length of a rotating microchannel. Theoretical analysis as well as experimental validation of the system is provided. In addition, we demonstrate the use of the hydrostatic pressure pump as a new method for priming hydrophobic-based siphon structures. The development of such techniques for hydrophobic fluidics advances the capabilities of the centrifugal microfluidic platform while remaining true to the goal of creating disposable polymer devices using feasible manufacturing schemes.     

Interactions between an Aryl Thioacetate‐Functionalized Zn(II) Porphyrin and Graphene Oxide

The surface modification of graphene oxide (GO) is carried out via the supramolecular functionalization route using a Zn(II)‐porphyrin which is soluble in common organic solvents on basis of long alkyl chains present at the exocyclic positions. This acts as a dispersing agent and decorates the surface of the graphene oxide uniformly, giving rise to a new nanohybrid denoted Zn(II)‐porphyrin@GO. The resulting Zn(II)‐porphyrin@GO nanohybrid forms a stable dispersion in ethanol (as characterized by several different spectroscopic techniques such as UV–vis, Fourier transform infrared, Raman). The morphology of Zn(II)‐porphyrin@GO nanohybrid is investigated by atomic force microscopy (AFM) and transmission electron microscope (TEM)/selected area electron diffraction. Both TEM and AFM measurements indicate that the Zn(II)‐porphyrin self‐assemble onto the surface of graphene oxide sheets. Steady‐state and time‐resolved fluorescence emission studies in the dispersed phase, and as a thin film, point toward the strongly quenched fluorescence emission and lifetime decay, suggesting that energy transfer occurs from the singlet excited state of Zn(II)‐porphyrin unit to GO sheets.     

Circulating RNA Molecules as Biomarkers in Liver Disease

Liver disease is a major cause of morbidity and mortality worldwide. As in other fields of medicine, there is a stringent need for non-invasive markers to improve patient diagnostics, monitoring and prognostic ability in liver pathology. Cell-free circulating RNA molecules have been recently acknowledged as an important source of potential medical biomarkers. However, many aspects related to the biology of these molecules remain to be elucidated. In this review, we summarize current concepts related to the origin, transportation and possible functions of cell-free RNA. We outline current development of extracellular RNA-based biomarkers in the main forms of non-inherited liver disease: chronic viral hepatitis, hepatocellular carcinoma, non-alcoholic fatty liver, hepato-toxicity, and liver transplantation. Despite recent technological advances, the lack of standardization in the assessment of these markers makes their adoption into clinical practice difficult. We thus finally review the main factors influencing quantification of circulating RNA. These factors should be considered in the reporting and interpretation of current findings, as well as in the proper planning of future studies, to improve reliability and reproducibility of results.     

Metals migration between product and metallic package in canned meat

The aim of this study is to investigate the migration of heavy metals in meat can under different parameters (varnish, storage time, storage temperature, storage humidity and varnish width and porosity). The physicochemical and organoleptic properties of the meat can have been analyzed. The metal content (Cd, Pb, Cu, Fe, Zn and Sn) were determined by flame and graphite furnace atomic absorption spectrometry after microwave digestion. The organoleptic and physicochemical properties of the samples have not modified significantly during the experiments. The metals migration is not influenced significantly by the varnish type. The highest level of metals in food products was observed at 4 and 50 °C. The porosity influenced significantly (p < 0.05) the migration of metals while the varnish width influence is not a significant one. The migration modeling using 3rd grade polynomial model achieved models with high coefficients of regression (greater than 0.9858).     

Duplex High-Resolution Melting Assay for the Simultaneous Genotyping of IL28B rs12979860 and PNPLA3 rs738409 Polymorphisms in Chronic Hepatitis C Patients

Chronic hepatitis C (CHC) is a major burden for public health worldwide. Although newer direct-acting antivirals show good efficacy, their cost precludes their wide adoption in resource-limited regions. Thus, strategies are being developed to help identify patients with high susceptibility to response to classic PEG-interferon + ribavirin therapy. IL28B polymorphism rs12979860 C/T is an important predictor for an efficient response to interferon-based therapy. A genetic variant in adiponutrin (PNPLA3) gene, rs738409 C/G, is associated with steatosis, severity, and progression of liver fibrosis in CHC patients, and predicts treatment outcome in difficult-to-cure HCV-infected patients with advanced fibrosis. We developed a rapid and inexpensive assay based on duplex high-resolution melting (HRM) for the simultaneous genotyping of these two polymorphisms. The assay validation was performed on synthetic DNA templates and 132 clinical samples from CHC patients. When compared with allele-specific PCR and sequencing, our assay showed 100% (95% CI: 0.9724–1) accuracy, with 100% sensitivity and specificity. Our assay was robust against concentration and quality of DNA samples, melting curve normalization intervals, HRM analysis algorithm, and sequence variations near the targeted SNPs (single nucleotide polymorphism). This duplex assay should provide useful information for patient-oriented management and clinical decision-making in CHC.