The cyclic oxidation resistance of cobalt-chromium-aluminum alloys at 1100 and 1200° C and a comparison with the nickel-chromium-aluminum alloy system

A series of Co-rich alloys in the Co-Cr-Al system were cyclically oxidized in still air for 500 1 -hr heating cycles at 1100° C and 200 1 -hr heating cycles at 1200°C, The specific weight-change data for each sample were then used to determine both an oxide growth constant, k₁, and a spoiling constant, k₂, for each alloy, using the regression equation W/A=k ₁ ^1/2 t^1/2— k₂t±. These in turn were combined to form an oxidation attack parameter, K_a, where K_a=(k ₁ ^1/2 +10k₂). These attack parameters, along with X-ray diffraction results, were then compared with K_a values determined for comparable Al and Cr compositions in the Ni-rich Ni-Cr-Al system. The K_a and X-ray diffraction results indicated that initially, if the Cr and Al contents in both systems are high enough, protective -Al₂O₃ and aluminate spinel(s) are formed. However, in the long run, when the scales eventually start to fail, mainly CoO is formed in the Co-Cr-Al system and mainly NiO in the Ni-Cr-Al system. The Ni-Cr-Al system is considered more oxidation resistant since CoO leads to massive spalling and sudden drastic weight loss, while NiO fails in a more gradual, predictive manner. Both sets of alloys were melted in zirconia crucibles and the resultant Zr pickup increased the cyclic oxidation resistance of the alloys in both systems.     

Performance optimization of integrated gas and power within microgrids using hybrid PSO–PS algorithm

In this paper, a hybrid algorithm consisting of particle swarm optimization and pattern search algorithm is proposed to evaluate and optimize the design and operation of microgrids (MGs) in combined gas and power networks. Key performance indicators (KPIs) are modeled and proposed to evaluate and assess MGs. The paper begins by proposing a comprehensive study to define KPIs, which are used to evaluate the following MG parameters: economical efficiency, reliability, environmental conservation, and power quality. Multi‐objective evaluation functions are then developed by building a relationship matrix of MG and KPI components. The results are then displayed as optimized power generation percentages for each technology with values for four KPI categories: cost, quality, reliability and environmental friendliness. Two case studies are examined in this paper; both the province of Ontario and Toronto regional zone under all system parameters with varying percentage of generation via gas technology. Results indicated that the optimal scenario for both Ontario and Toronto was achieved at hybrid PSO–patern search percentage generation via gas technology with improved cost KPI and other KPIs remaining approximately constant. Copyright © 2016 John Wiley & Sons, Ltd.     

Cyclic and isothermal oxidation behavior on some Ni-Cr alloys

Additions of 3 wt.% Mn and 3 wt.% Si were made to Ni-20Cr. These alloys, along with Ni-20Cr and Ni-40Cr were oxidized for 100 1-hr cycles at 1100°C and 50 1-hr cycles at 1200° C. Oxidation behavior was judged by sample weight and thickness change, metallography, x-ray diffraction, and electron microprobe analysis. These tests showed that Ni-40Cr and Ni-20Cr-3Si were about the same and were the most oxidation-resistant alloys. Ni-20Cr-3Mn was not as oxidation resistant, especially at 1200° C. Ni-20Cr was far less oxidation resistant than any of the other alloys. The Ni-40Cr and Ni-20Cr-3Si relied on a protective layer of Cr₂O₃ for their oxidation resistance. A SiO₂ layer was noted beneath the Cr₂O₃ layer on the Ni-20Cr-3Si, but had apparently only a second-order effect. The source of improved protection of the Ni-20Cr-3Mn was apparently the formation of a relatively adherent MnCr₂O₄ layer at the metal-oxide interface.     

The platysma myocutaneous flap. Indications and caveats

Arterial hypertension has been identified as a major secondary risk factor for diabetic retinopathy. However, the mechanisms by which hypertension worsens retinopathy are unknown. Inhibition of advanced glycation product formation prevents the development of experimental diabetic retinopathy in normotensive diabetic rats. In this study the effect of hypertension on the rate of diabetic retinopathy development and the formation of arteriolar thrombosis was evaluated. We also evaluated the effect of aminoguanidine, an inhibitor of advanced glycation and product formation on retinal pathology of diabetic hypertensive rats. After 26 weeks of diabetes, hypertension accelerated the development of retinopathy despite a lower mean blood glucose level than in the non-hypertensive group (diabetic spontaneous hypertensive rats (SHR) 16.00 +/- 6.83 mmol/l; diabetic normotensive Wistar Kyoto rats (WKY) 34.9 +/- 3.64 mmol/l; p < 0.0001). Diabetic SHR had nearly twice as many acellular capillaries as diabetic WKY (SHR diabetic: 91.9 +/- 7.5 acellular capillaries per mm2 of retinal area vs WKY diabetic: 53.7 +/- 8.5 acellular capillaries per mm2 of retinal area), and a 3.8-fold increase in the number of arteriolar microthromboses (SHR diabetic 23,504 +/- 5523 microns2 vs SHR non-diabetic 6228 +/- 2707 microns2). Aminoguanidine treatment of SHR diabetic rats reduced the number of acellular capillaries by 50%, and completely prevented both arteriolar deposition of PAS-positive material and abnormal microthrombus formation. These data suggest that hypertension-induced deposition of glycated proteins in the retinal vasculature plays a central role in the acceleration of diabetic retinopathy by hypertension.     

Ultrasound findings in hepatitis

A retrospective study of ultrasound images of the liver in patients with hepatitis was undertaken. Two distinct ultrasound patterns were detected. In acute hepatitis, the predominant findings were accentuated brightness and more extensive demonstration of the portal vein radicle walls and overall decreased echogenicity of the liver. Chronic hepatitis primarily revealed decreased brightness and number of portal vein radicle walls and verall increased liver echogenicity. In addition, the pathological severity closely paralleled these ultrasound patterns. A prospective study confirmed the same acute hepatitis ultrasound findings with close correlation to the clinical severity. These distinct ultrasound patterns will help to evaluate patients with suspected acute and chronic hepatitis and more accurately define intrahepatic causes of jaundice.     

Physicochemical properties of calcific deposits isolated from porcine bioprosthetic heart valves removed from patients following 2-13 years function

The purpose of this study was to characterize the physicochemical properties of calcific deposits that cause the failure of tissue-derived heart valve bioprostheses. This was done in an effort to understand the mechanism of pathologic biomineralization in the cardiovascular system and potentially prevent deterioration of bioprostheses. Calcific deposits taken from 10 failed bioprosthetic valves that had been implanted in patients for 2-13 years were characterized by chemical analysis, x-ray diffraction, FTIR spectroscopy, scanning electron microscopy, polarized light microscopy, and solubility measurements. The combined results identified the biomineral as an apatitic calcium phosphate salt with substantial incorporation of sodium, magnesium and carbonate. The average Ca/PO4 ratio for this "young" pathologic biomineral was approximately 1.3, considerably lower than approximately 1.7 found in mature atherosclerotic plaque biomineral and mature skeletal biomineral, both of which approximate hydroxyapatite in composition. Deproteinated calcific deposits from bioprostheses had thermodynamic solubilities comparable to those of both atherosclerotic plaque, typical pathologic biomineral and hydrolyzed octacalcium phosphate (OCP, Ca4H(PO4)3 x 2.5 H2O), a proposed precursor phase to biomineral apatite. This later finding, together with chemical composition and structural details of the bioprosthetic deposits themselves, supports a mechanism of cardiovascular calcification in which OCP plays a crucial role in the formation of the final apatitic phase. This suggests an approach toward prevention of bioprosthetic tissue calcification through control of the formation of the kinetically favored OCP precursor and/or its transformation into bioapatite.     

Fast and one-step folding of closely and distantly related homologous proteins of a four-helix bundle family

Bovine acyl-coenzyme A binding protein is a four-helix bundle protein belonging to a group of homologous eukaryote proteins that binds medium and long-chain acyl-coenzyme A esters with a very high affinity. The three-dimensional structure of both the free and the ligated protein together with the folding kinetics have been described in detail for the bovine protein and with four new sequences reported here, a total of 16 closely related sequences ranging from yeasts and plants to human are known. The kinetics of folding and unfolding in different concentrations of guanidine hydrochloride together with equilibrium unfolding have been measured for bovine, rat and yeast acyl-coenzyme A binding protein. The bovine and rat sequences are closely related whereas the yeast is more distantly related to these. In addition to the three natural variants, kinetics of a bovine mutant protein, Tyr31 --> Asn, have been studied. Both the folding and unfolding rates in water of the yeast protein are 15 times faster than those of bovine. The folding rates in water of the two mammalian forms, rat and bovine, are similar, though still significantly different. A faster unfolding rate both for rat and the bovine mutant protein results from a lower stability of the native states of these. These hydrophobic regions, mini cores, have been identified in the three-dimensional structure of the bovine protein and found to be formed primarily by residues that have been conserved throughout the entire eukaryote evolution from yeasts to both plants and mammals as seen in the sample of 16 sequences. The conserved residues are found to stabilize helix-helix interactions and serve specific functional purposes for ligand binding. The fast one-step folding mechanism of ACBP has been shown to be a feature that seems to be maintained throughout evolution despite numerous differences in sequence and even dramatic differences in folding kinetics and protein stability. The protein study raises the question to what extent does the conserved hydrophobic residues provide a scaffold for an efficient one-step folding mechanism.     

Infantile intestinal leiomyosarcoma: surgical resection (without adjuvant therapy) for cure

A 7-week-old boy presented with a 6-week history of failure to thrive, acute intestinal obstruction, and an apparently irreducible intussusception (noted on contrast enema). He underwent abdominal exploration, during which a cecal mass was identified and resected. The mass proved to be a leiomyosarcoma. Histologically, it was an intermediate-grade malignancy with a predicted 5-year survival rate of 16% to 23% based on data from the adult experience. Three years after resection and without having received adjuvant therapy, he is healthy and free of disease. A review of the literature showed that in infants these tumors are predominantly colonic, compared with the predilection for small intestinal lesions found in the older pediatric and adult populations. Infantile intestinal leiomyosarcomata are rare malignancies that do well if complete surgical excision of the disease can be accomplished. The histological prognostic indicators proposed for intestinal leiomyosarcomas in the adult population cannot be extrapolated to infants because when they occur in infants, they appear to be less aggressive, and these patients do well without adjuvant therapy.