Thermal stability of HfO2-on-GaAs nanopatterns

We have evaluated the effect of thermal annealing on the morphology, crystalline phase and elemental composition of high-k dielectric HfO(2)-on-GaAs nanopatterns at 500-620 °C by using atomic force microscopy (AFM), high-resolution transmission electron microscopy (HRTEM) and energy dispersive X-ray spectroscopy (EDS). While the HfO(2)-GaAs interface continues to be atomically abrupt at 620 °C, we have found a gradual shrinkage in the pattern linewidth and period with increasing temperature. Facet formation triggered by a nanoscale-modulated sequence of tensile and compressive stresses on the GaAs substrate, observed at 620 °C, has been attributed to a volumetric expansion of the HfO(2) nanostructures, caused by the tetragonal/cubic to monoclinic HfO(2) phase transformation and, to a lesser extent, by solid-state diffusion of As into HfO(2).     

Study of the polymerization of 1-octadecene with different rnetallocene catalysts

Summary 1-Octadecene (C18) was polymerized by using different metallocene catalysts. The rac-Et(Ind)₂ZrC1₂/MAO (I) and rac-Me₂Si(Ind)₂ZrC1₂/MAO (III) presented the highest activity as compared with ra-Et(2-Me-Ind)₂ZrCl₂/MAO (II) and Ph₂C(Flu)(Cp)ZrC1₂/MAO (IV) catalysts. Catalyst IV produced polymers with highest molecular weights. The microstructure of the polymers was determined by ¹³C-NMR spectroscopy. Catalyst systems I, II and III produced isotactic polymers while catalyst IV produced polymers with mainly syndiotactic structures but with large amount of stereoregular error. Received: 21 June 2002/Revised version: 4 November 2002/ Accepted: 4 November 2002     

Variability of the Pull-off Technique for Adhesion Strength Evaluation on Ceramic Tile Claddings

The periodic assessment of claddings adhesion during the facade life cycle becomes an important preventive in-service issue. This paper discusses the pull-off test, an in-situ diagnosis technique, which characterizes the in-service performance of ceramic tile claddings, by measuring adherence resistance to tension. Adherence is one of the main required properties of external coating, not only for aesthetical reasons but also for safety purposes. Throughout this research, an experimental campaign is performed in laboratory and in-situ, analyzing the variability of the pull-off testing technique. In-situ tests have been undertaken in existing construction sites and test walls. The laboratory results were compared to the in-situ ones. Standards requirements were evaluated and different failure modes were verified. In this work the impact of several parameters is analyzed such as the use of metallic discs with different thickness levels, geometries, and dimensions; the location of the testing at different heights; and the use of different dynamometer equipment. The main conclusion of this work is in order to reduce the uncertainty of the in-service diagnosis used for decision process of facade interventions, the previous parameters should be taking into account despite pull-off being a standardized technique.     

The Anti-Inflammatory Effects of the Methanolic Extract and Fractions from Davilla elliptica St. Hil. (Dilleniaceae) on Bothrops jararaca Envenomation

Inflammation and haemorrhage are the main characteristics of tissue injury in botropic envenomation. Although some studies have shown that anti-venom prevents systemic reactions, it is not efficient in preventing tissue injury at the site of the bite. Therefore, this work was undertaken to investigate the anti-inflammatory effects of the methanolic extract and fractions from D. elliptica and to evaluate the role of matrix metalloproteinases (MMPs) in this process. Effects of the extract and fractions from D. elliptica were evaluated using a carrageenan-induced paw oedema model in rats, and leukocyte rolling was visualized by intravital. The quantification of MMPs activities (MMP-2 and MMP-9) extracted from the dermis of mice treated with extract and fractions alone or incubated with venom was determined by zymographic analyses. Our results show that intraperitoneal (i.p.) injection of fractions significantly reduced paw oedema after the carrageenan challenge. Treatment with the tannins fraction also resulted in considerable inhibition of the rolling of leukocytes and this fraction was able to decrease the activation of MMP-9. These results confirmed the anti-inflammatory activity of the methanolic extract and tannins fraction of D. elliptica and showed that the dermonecrosis properties of B. jararaca venom might be mediated through the inhibition of MMP-9 activity.     

Pore-Level Modeling of Isothermal Drying of Pore Networks Accounting for Evaporation,Viscous Flow,and Shrinking

Abstract

Simulation results of pore-level drying of non-hygroscopic, non-rigid, liquid-wet porous media are presented. Two- and three-dimensional pore networks represent pore spaces. Two kinds of mechanisms are considered: evaporation and hydraulic flow. The process is considered under isothermal conditions. Capillary forces thus dominate over viscous forces and the drying is considered as a modified form of invasion percolation. Liquid in pore corners allows for hydraulic connection throughout the network. During drying, liquid is replaced by vapor by two fundamental mechanisms: evaporation and pressure gradient–driven liquid flow. The development of capillary pressure as menisci turn concave induces shrinkage of the matrix, which contributes to the pressure gradient that drives liquid toward the surface of the network. Using Monte Carlo simulation, we find evaporation and drainage times; the shortest calculated indicates the controlling mechanism. Here we report distributions of liquid and vapor as drying time advances. For the calculation of transport properties, details of pore space and displacement are subsumed in pore conductances. Solving for the pressure field in each phase, vapor and liquid, we find a single effective conductance for each phase as a function of liquid saturation. Along with the effective conductance for the liquid-saturated network, the relative permeability of liquid and diffusivity of vapor are calculated.     

Testing New In-Kiln Meter for Monitoring Lumber Moisture Content during Drying

The objective of this study was to test a new in-kiln sensor for monitoring lumber moisture content during industrial drying. The theoretical foundation of the technology was already known, because it is based on electrical conductivity, but the mechanism of implementation was new and required validation. For this reason, the technology was compared with two other widely used methods for assessing lumber moisture content, namely, the oven-drying and electrical capacitance methods. The tests were performed in a 120-m³ industrial kiln operated by a sawmill in the eighth region of Chile, and the results showed that the average moisture content at the end of drying was satisfactorily determined by the new in-line sensor. As predicted by theory, the sensor was not able to accurately measure moisture content above 25%, but it was still able to provide the equivalent of a drying curve for monitoring of the drying process.     

Size Distribution and Morphology of Liposome Aerosols Generated By Two Methodologies

Pulmonary delivery of sustained release formulations needs drug encapsulation in a suitable matrix, as well as the generation of aerosols with high lung penetration and suitable release characteristics. Nanometer sized liposomes offer the potential for biocompatibility, controlled release and easy internalization in the lung. For uniform dose delivery and drug release kinetics, it is of interest to understand generation techniques to obtain aerosols containing nearly monodispered nanometer sized dry particles. Two aerosolization techniques, air-jet atomization and electrohydrodynamic atomization (EHDA) were studied to identify conditions under which the inclusion of one-liposome-per-drop could be achieved. In air-jet atomization, low lipid concentrations resulted in a unimodal aerosol with a median mobility diameter of 94 (± 3.5) nm, while higher concentrations led to larger median diameters, implying possible inclusion of multiple liposomes per drop. In EHDA, tuning drop sizes in the range of 130 to 200 nm, as well as the use of high lipid concentrations, resulted in a bimodal aerosol distribution, with peaks at 35 and 100 nm mobility diameters. TEM images of the liposome aerosol from EDHA showed fused liposomes, resulting in cylindrical structures with different physical diameters. It was hypothesized that deformation of liposomes to cylindrical structures in the micro-capillary liquid tip of the electrospray, and interactions along the axial or cross sectional surfaces led to dry particles with different mobility sizes.     

Identification of Oxidative Stress Related Proteins as Biomarkers for Lung Cancer and Chronic Obstructive Pulmonary Disease in Bronchoalveolar Lavage

Lung cancer (LC) and chronic obstructive pulmonary disease (COPD) commonly coexist in smokers, and the presence of COPD increases the risk of developing LC. Cigarette smoke causes oxidative stress and an inflammatory response in lung cells, which in turn may be involved in COPD and lung cancer development. The aim of this study was to identify differential proteomic profiles related to oxidative stress response that were potentially involved in these two pathological entities. Protein content was assessed in the bronchoalveolar lavage (BAL) of 60 patients classified in four groups: COPD, COPD and LC, LC, and control (neither COPD nor LC). Proteins were separated into spots by two dimensional polyacrylamide gel electrophoresis (2D-PAGE) and examined by matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF/TOF). A total of 16 oxidative stress regulatory proteins were differentially expressed in BAL samples from LC and/or COPD patients as compared with the control group. A distinct proteomic reactive oxygen species (ROS) protein signature emerged that characterized lung cancer and COPD. In conclusion, our findings highlight the role of the oxidative stress response proteins in the pathogenic pathways of both diseases, and provide new candidate biomarkers and predictive tools for LC and COPD diagnosis.     

Physicochemical Study of Glycerol Hydrogenolysis Over a Ni–Cu/Al2O3 Catalyst Using Formic Acid as the Hydrogen Source

Glycerol hydrogenolysis to propanediols requires the use of hydrogen as reactant. One interesting option is to directly generate this hydrogen in active sites of the support using hydrogen donors, such as formic acid. The effect that the reacting pressure has on glycerol conversion and product selectivity over a Ni–Cu/Al₂O₃ catalyst was studied. The negative effect of decreasing the pressure was much more significant when the source of hydrogen was dissolved molecular hydrogen than when it was formic acid. X-ray photoelectron spectroscopy and temperature programmed reduction measurements were performed to understand the effect of Ni–Cu/Al₂O₃ reduction procedure on the catalytic activity. Semi-batch reactor studies with the Ni–Cu/Al₂O₃ catalyst were carried out with continuous addition of the hydrogen donor to obtain kinetic data. Langmuir–Hinshelwood type models were developed to describe the direct conversion of glycerol into propanediol, and propanediol further hydrogenolysis to 1-propanol. The model included the competitive adsorption between both glycols. These models were used to obtain valuable data for the optimization of the process.     

A transcultural study on stirred strawberry yogurt: consumer acceptability versus sensory quality with trained panel

The present work was designed in order to obtain the cut off point, to be used in a shelf life study on whole stirred strawberry yogurt. The study was simultaneously carried out in Argentina, Chile and Costa Rica, assaying the same kind of product, elaborated in each one of the countries. The sensory quality parameters obtained from trained panelists and the consumers acceptability, were correlated by using the cut off point methodology through a quality evaluation by the Karlsruhe scale. According to preliminary studies, the storage at 42 degrees C produced considerable damage on parameters such as pH, acidity (volumetric assay), viscosity and sensory quality. For each sample, the cut off point was determined. This value corresponds to the threshold score for the sensory quality, where the consumer starts to perceive negative changes in the product, when comparing with the fresh product. The rejection percentage was also calculated according to the cut off point. The cut off points and the percentage of rejection obtained by the three participating countries were similar. Data obtained from Costa Rica showed changes in color, acidity and rancidity. Argentinean yogurts developed acidity that had a negative effect on texture, appearance and residual flavors. Chilean samples presented a sensory quality that remains almost without change through the studied time. The differences of the deterioration pattern amongst the three countries, demonstrates that the products are different in formulation and elaboration process, in spite of been the same kind of yogurt. This could be explained by differences specified in the regulation of each country.