Integration of enterprise levels based on an ontological framework

Enterprises are highly complex systems in which one or more organizations share a definite mission, goals and objectives to offer a product or service. In this study, an ontological framework is built as a mechanism for exchanging information and knowledge models for multiple applications and effective integration between hierarchical levels. The potential of the general semantic framework that is developed is demonstrated using a case study concerning the enterprise supply chain network design-planning problem.     

Extractant Assisted Synthesis of Polymer Stabilized Platinum and Palladium Metal Nanoparticles for Sensor Applications

Abstract

Extractant‐assisted synthesis of platinum and palladium polymer‐stabilized metal nanoparticles (PSMNP) was carried out for the first time. The synthesis included the following sequential steps: a) loading of extractant (tributyl‐phosphine oxide, TBPO) with the desired metal ion; b) preparation of a membrane “cocktail” by mixing a metal‐containing extractant, solution of the polymer (PVC or polysulfone) and plastisizer; c) membrane deposition and metal reduction inside the membrane (intermatrix synthesis of PSMNP) by using either a chemical or an electrochemical reduction technique. The electro conductivity of the resulting polymer‐metal nanocomposite membrane appeared by several orders of magnitude higher than that of the metal‐free polymer. The mass‐exchange properties of PSMNP‐containing membranes were shown to depend on both the type of the polymer and the membrane deposition technique.     

Modeling at Pore-Scale Isothermal Drying of Porous Materials: Liquid and Vapor Diffusivity

Numerical simulations of isothermal drying of non-hygroscopic liquid-wet rigid porous media are performed. Two- and three-dimensional pore networks represent pore spaces. Two types of mechanisms are considered: evaporation and hydraulic flow. The drying is considered to be a modified form of invasion percolation. Liquid in pore corners allows for a hydraulic connection throughout the network at all times. As drying progresses, liquid is replaced by vapor by two fundamental mechanisms: evaporation and pressure gradient–driven liquid flow. Using a Monte Carlo simulation, evaporation and drainage times are computed. The controlling mechanism is indicated by the shorter calculated time. Initially, the drying is governed by liquid flow, then by a combination of liquid flow and evaporation and finally by local evaporation. Reported here are the distributions of liquid and vapor with drying time, capillary pressure curves, liquid film saturation curves, and liquid diffusivity and vapor diffusivity as a function of liquid saturation.     

Lignin liquefaction under microwave heating

Organosolv lignin from olive tree pruning was subjected to liquefaction under microwave heating and modifying the experimental conditions (time, temperature, and concentration of catalyst) according to an experimental design. The organosolv lignin and obtained polyols were characterized using attenuated‐total reflection infrared spectroscopy (ATR‐IR), thermogravimetric analysis (TGA), gel permeation chromatography, and another parameter such as the hydroxyl number (I_OH). The ATR‐IR and the TGA results showed that the solvents (polyethylene glycol #400 and glycerol) reacted with the lignin being present in the final product. The optimal polyol showed a liquefaction yield of 99.07% that was obtained in 5 min of reaction at 155°C with 1% of sulphuric acid. The liquefaction product showed a hydroxyl number of 811.8 mg KOH/g, suitable to be used as a precursor in polyurethane foam synthesis. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3292–3298, 2013     

Poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐co‐HFP) hollow fiber membranes prepared from PVDF‐co‐HFP/PEG‐600Mw/DMAC solution for membrane distillation

Poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐co‐HFP) hollow fiber membranes were prepared by using the phase inversion method. The effect of polyethylene glycol (PEG‐600Mw) with different concentrations (i.e., 0, 5, 7, 10, 12, 15, 18, and 20 wt %) as a pore former on the preparation and characterization of PVDF‐co‐HFP hollow fibers was investigated. The hollow fiber membranes were characterized using scanning electron microscopy, atomic force microscopy, and porosity measurement. It was found that there is no significant effect of the PEG concentration on the dimensions of the hollow fibers, whereas the porosity of the hollow fibers increases with increase of PEG concentration. The cross‐sectional structure changed from a sponge‐like structure of the hollow fiber prepared from pure PVDF‐co‐HFP to a finger‐like structure with small sponge‐like layer in the middle of the cross section with increase of PEG concentration. A remarkable undescribed shape of the nodules with different sizes in the outer surfaces, which are denoted as “twisted rope nodules,” was observed. The mean surface roughness of the hollow fiber membranes decreased with an increase of PEG concentration in the polymer solution. The mean pore size of the hollow fibers gradually increased from 99.12 to 368.91 nm with increase of PEG concentration in polymer solution. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Designing hypermedia tools for solving problems in mathematics

This article presents the design and preparation using hypermedia tools of an interactive CD-ROM for the active teaching and learning of diverse problem-solving strategies in Mathematics for secondary school students. The use of the CD-ROM allows the students to learn, interactively, the heuristic style of solving problems. A range of problems has been used, each of which requires different solving strategies. A complementary section for consulting the theoretical foundations for the process of solving problems and other related information is also included on the CD-ROM. This section provides both theoretical and curriculum support for teachers.     

Bitter potato starch-based film enriched with copaiba leaf extract obtained using supercritical carbon dioxide: Physical–mechanical,antioxidant, and disintegrability properties

Films based on bitter potato starch (BPS) and its blends with chitosan (BPS-Ch) or soy protein isolate (BPS-SPI) loaded with copaiba leaf extract (E) are prepared via the casting method. The physical–mechanical and antioxidant properties of the as-prepared films are compared with those of a control. Moreover, the half-maximal degradation (t₅₀) of the prepared films is calculated by fitting the Hill model to disintegrability kinetic data. Among the analyzed films, BPS-Ch-E exhibits the lowest (p < 0.05) solubility in water and opacity, strongest water vapor-barrier (3.58 × 10⁻¹¹ g m⁻¹ s⁻¹ Pa⁻¹), and highest tensile strength and elongation at break. The Fourier transform infrared spectra of BPS-Ch-E and BPS-SPI-E demonstrate new peaks at 1550, 1239, and 1070 cm⁻¹ corresponding to N H and C O stretching. The BPS-E and BPS-Ch-E surfaces are devoid of scratches and phase separation. The incorporation of E significantly increases the antioxidant activity of the films. BPS-SPI-E and BPS-Ch-E demonstrate the lowest (t₅₀ ≈ 1.4 days) and highest (t₅₀ ≈ 3.5 days) disintegration rates, respectively, among the prepared films. E loading facilitates the development of films possessing beneficial physical–mechanical and antioxidant properties as well as rapid disintegrability, enabling their potential application as a eco-friendly packaging material.     

Electromagnetic Zero-Sequence Harmonics Blocker： Modeling and Experimental Analysis

This paper reveals new contributions to the analysis and development of devices for harmonic distortion mitigation. Considering the sequential distribution of harmonic currents, zero-sequence components could be diminished using electromagnetic devices, particularly the eZSB （electromagnetic zero-sequence blocking）. One important characteristic of this device, which has received particular attention on this research, is its robustness and low cost of construction. Theoretical and experimental results related to the behavior of the electromagnetic blocking devices are presented. The results illustrate the consistence of the theoretical aspects related with the model in the frequency domain, as well as the performance of the blocking devices, reducing zero-sequence harmonic currents, mainly by the conjunct action of the eZSF （electromagnetic zero-sequence harmonic filter）, working as a impedance coupler. In this context, aiming the evaluation of the reliability of the results obtained through mathematical modeling, experimental tests have been carried out using a low-power prototype, highlighting particular aspects related to its function as a zero-sequence harmonic blocker.     

Compact Modules for Wireless Communication Systems in the E-Band (71–76 GHz)

The millimeter-wave spectrum above 70 GHz provides a cost-effective solution to increase the wireless communications data rates by increasing the carrier wave frequencies. We report on the development of two key components of a wireless transmission system, a high-speed photodiode (HS-PD) and a Schottky Barrier Diode (SBD). Both components operate uncooled, a key issue in the development of compact modules. On the transmitter side, an improved design of the HS-PD allows it to deliver an output RF power exceeding 0 dBm (1 mW). On the receiver side, we present the design process and achieved results on the development of a compact direct envelope detection receiver based on a quasi-optical SDB module. Different resonant (meander dipole) and broadband (Log-Spiral and Log-Periodic) planar antenna solutions are designed, matching the antenna and Schottky diode impedances at high frequency. Impedance matching at baseband is also provided by means of an impedance transition to a 50 Ohm output. From this comparison, we demonstrate the excellent performance of the broadband antennas over the entire E-band by setting up a short-range wireless link transmitting a 1 Gbps data signal.