3D Printed Anatomical Nerve Regeneration Pathways

A 3D printing methodology for the design, optimization, and fabrication of a custom nerve repair technology for the regeneration of complex peripheral nerve injuries containing bifurcating sensory and motor nerve pathways is introduced. The custom scaffolds are deterministically fabricated via a microextrusion printing principle using 3D models, which are reverse engineered from patient anatomies by 3D scanning. The bifurcating pathways are augmented with 3D printed biomimetic physical cues (microgrooves) and path‐specific biochemical cues (spatially controlled multicomponent gradients). In vitro studies reveal that 3D printed physical and biochemical cues provide axonal guidance and chemotractant/chemokinetic functionality. In vivo studies examining the regeneration of bifurcated injuries across a 10 mm complex nerve gap in rats showed that the 3D printed scaffolds achieved successful regeneration of complex nerve injuries, resulting in enhanced functional return of the regenerated nerve. This approach suggests the potential of 3D printing toward advancing tissue regeneration in terms of: (1) the customization of scaffold geometries to match inherent tissue anatomies; (2) the integration of biomanufacturing approaches with computational modeling for design, analysis, and optimization; and (3) the enhancement of device properties with spatially controlled physical and biochemical functionalities, all enabled by the same 3D printing process.     

Effects of packaging SrI2(Eu) scintillator crystals

Recent renewed emphasis placed on gamma-ray detectors for national security purposes has motivated researchers to identify and develop new scintillator materials capable of high energy resolution and growable to large sizes. We have discovered that SrI₂(Eu) has many desirable properties for gamma-ray detection and spectroscopy, including high light yield of ∼90,000 photons/MeV and excellent light yield proportionality. We have measured <2.7% FWHM at 662 keV with small detectors (<1 cm³) in direct contact with a photomultiplier tube, and ∼3% resolution at 662 keV is obtained for 1 in.³ crystals. Due to the hygroscopic nature of SrI₂(Eu), similar to NaI(Tl), proper packaging is required for field use. This work describes a systematic study performed to determine the key factors in the packaging process to optimize performance. These factors include proper polishing of the surface, the geometry of the crystal, reflector materials and windows. A technique based on use of a collimated ¹³⁷Cs source was developed to examine light collection uniformity. Employing this technique, we found that when the crystal is packaged properly, the variation in the pulse height at 662 keV from events near the bottom of the crystal compared to those near the top of the crystal could be reduced to <1%. This paper describes the design and engineering of our detector package in order to improve energy resolution of 1 in.³-scale SrI₂(Eu) crystals.     

Antimicrobial edible apple films inactivate antibiotic resistant and susceptible Campylobacter jejuni strains on chicken breast

Abstract: Campylobacter jejuni is the leading cause of bacterial diarrheal illness worldwide. Many strains are now becoming multidrug resistant. Apple‐based edible films containing carvacrol and cinnamaldehyde were evaluated for bactericidal activity against antibiotic resistant and susceptible C. jejuni strains on chicken. Retail chicken breast samples inoculated with D28a and H2a (resistant strains) and A24a (a sensitive strain) were wrapped in apple films containing cinnamaldehyde or carvacrol at 0.5%, 1.5%, and 3% concentrations, and then incubated at 4 or 23 °C for 72 h. Immediately after wrapping and at 72 h, samples were plated for enumeration of viable C. jejuni. The antimicrobial films exhibited dose‐ and temperature‐dependent bactericidal activity against all strains. Films with ≥1.5% cinnamaldehyde reduced populations of all strains to below detection at 23 °C at 72 h. At 4 °C with cinnamaldehyde, reductions were variable for all strains, ranging from 0.2 to 2.5 logs and 1.8 to 6.0 logs at 1.5% and 3.0%, respectively. Films with 3% carvacrol reduced populations of A24a and H2a to below detection, and D28a by 2.4 logs at 23 °C and 72 h. A 0.5‐log reduction was observed for both A24a and D28a, and 0.9 logs for H2a at 4 °C at 3% carvacrol. Reductions ranged from 1.1 to 1.9 logs and 0.4 to 1.2 logs with 1.5% and 0.5% carvacrol at 23 °C, respectively. The films with cinnamaldehyde were more effective than carvacrol films. Reductions at 23 °C were greater than those at 4 °C. Our results showed that antimicrobial apple films have the potential to reduce C. jejuni on chicken and therefore, the risk of campylobacteriosis. Possible mechanisms of antimicrobial effects are discussed. Practical Application: Apple antimicrobial films could potentially be used in retail food packaging to reduce C. jejuni commonly present on food.     

Fabrication of Covalently Crosslinked and Amine-Reactive Microcapsules by Reactive Layer-by-Layer Assembly of Azlactone-Containing Polymer Multilayers on Sacrificial Microparticle Templates

We report on the fabrication of covalently crosslinked and amine-reactive hollow microcapsules using 'reactive' layer-by-layer assembly to deposit thin polymer films on sacrificial microparticle templates. Our approach is based on the alternating deposition of layers of a synthetic polyamine and a polymer containing reactive azlactone functionality. Multilayered films composed of branched poly(ethylene imine) (BPEI) and poly(2-vinyl-4,4-dimethylazlactone) (PVDMA) were fabricated layer-by-layer on the surfaces of calcium carbonate and glass microparticle templates. After fabrication, these films contained residual azlactone functionality that was accessible for reaction with amine-containing molecules. Dissolution of the calcium carbonate or glass cores using aqueous ethylenediamine tetraacetic acid (EDTA) or hydrofluoric acid (HF), respectively, led to the formation of hollow polymer microcapsules. These microcapsules were robust enough to encapsulate and retain a model macromolecule (FITC-dextran) and were stable for at least 22 hours in high ionic strength environments, in low and high pH solutions, and in several common organic solvents. Significant differences in the behaviors of capsules fabricated on CaCO(3) and glass cores were observed and characterized using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Whereas capsules fabricated on CaCO(3) templates collapsed upon drying, capsules fabricated on glass templates remained rigid and spherical. Characterization using EDS suggested that this latter behavior results, at least in part, from the presence of insoluble metal fluoride salts that are trapped or precipitate within the walls of capsules after etching of the glass cores using HF. Our results demonstrate that the assembly of BPEI/PVDMA films on sacrificial templates can be used to fabricate reactive microcapsules of potential use in a wide range of fields, including catalysis, drug and gene delivery, imaging, and biomedical research.     

Capitated risk-bearing managed care systems could improve end-of-life care

A surface protein antigen (PAc) of Streptococcus mutans, in particular the A-region of this PAc molecule, has been noted as a possible target in research for an effective dental caries vaccine. To identify the antigenic peptide binding to major histocompatibility complex (MHC) class II (HLA-DR) molecules in the A-region, we prepared a panel of overlapping synthetic peptides in the second unit of the A-region, and established that a simple enzyme-linked immunosorbent assay (ELISA) binding assay could be achieved by incubating the DR-crude. Binding to DR molecules of these peptides from nine donors was investigated by using the ELISA binding assay. It was revealed that the PAc(316-334) peptide bound more strongly to the HLA-DR molecule in seven out of nine subjects. In particular, DR8 (DRB1*0802), DR5 (DRB1*1101) and DR6 (DRB1*1402 and *1405), which bound strongly to PAc(316-334) peptide, were identified. Moreover, we synthesized glycine-substituted peptide analogues of the peptide and examined the binding motif of the binding region. As a result, the multiple binding motif in DR8, DR5 and DR6 was found in L-RV-K-A. It is suggested that a peptide vaccine for dental caries that is more effective for humans, with fewer adverse side-effects, could be designed by combining the multiple binding motif with the B-cell epitope to produce only the inhibiting antibody against dental caries. The peptide could therefore be useful for peptide vaccine development in the general human population.     

The weight vector theory of Coriolis mass flowmeters — Part 2. Boundary source of secondary vibration

The purpose of this short paper is to draw attention to a boundary source of secondary vibration in Coriolis mass flowmeters. This is important in the calculation of meter sensitivity using the weight vector theory if the effect of fluid viscosity is to be taken into account in the vibrational flow.