Macroscopic and crystallographic density of solid-state extruded polyethylene

Summary The influence of draw ratio on macroscopic and crystallographic density of polyethylene with different initial morphologies, has been investigated by solid-state extrusion. An initial drop followed by an increase in macroscopic density as a function of draw ratio has been observed. Since precision X-ray measurements of unit cell parameters showed no variation of crystallographic density, it was concluded that plastic deformation of polyethylene upon drawing proceeds with a decrease of the degree of crystallinity. This was confirmed by differential scanning calorimetry.     

The effect of a solid additive on rolling fatigue life

Behaviour of a series of lubricant oils and the effect of a non stoichiometric inorganic compound, as solid extreme pressure additive, on rolling fatigue life are studied using the rolling four-ball accelerated service simulation test proposed by Barwell and Scott. The results show, in all tested cases, the remarkable efficacy of this type of additive. The Total Acidity Number (tan) was found to increase with performance time for the case of the base lubricant, while for the oils with additives, it remained at its constant low value. This led to a proposal of a possible mechanism of the additive performance in the rolling process.     

Interactions of electron beams with surfaces of MgO crystals

The strong interaction of electrons with the flat surfaces of small crystals has been investigated by high resolution CTEM and STEM instruments. When cubic crystals of MgO smoke with edges 20–300 nm are oriented so that the ?001? or ?011? zone axis is parallel to the optical axis, then two kinds of external fringes are observed at (100) surfaces. One kind is parallel to the surface, having spacings up to 0.4 nm. These are caused by interference among the electron channelled along the surface. Fresnel-diffracted ones and the remnant of the incident beam. Fringes of the other kind, which appear as fine structure in the first kind of fringes, are perpendicular to the crystal edge. When an electron beam is parallel to the ?011? axis, the second kind of fringe, whose spacing is 0.3 nm corresponding to d₀₁₁, shows the difference of the surface potential between magnesium atoms and oxygen atoms. Selected area diffraction patterns and microdiffraction patterns also show the same periodicities as in the two kinds of fringes. Simulated images, using the scattering amplitudes for ions, are compared with observations.     

An Investigation into Glucose as a Potential Precursor of N-Nitrosothiazolidine in Bacon

The possible involvement of glucose in the formation of N-nitrosothiazolidine (NTHZ) in bacon was investigated by pumping pork bellies with brines containing added glucose (2 and 4%). Raw bacon samples processed with glucose had significantly lower levels of N-nitrosothiazolidine-4-carboxylic acid than the smoked control bacons. When the bacon samples with glucose were fried for 6 and 12 min, no NTHZ was detected in the fried products. N-Nitrosopyrrolidine (NPYR) levels in these samples were much lower than those in the fried control samples. Results of this study demonstrate that the contribution of glucose to NTHZ formation in bacon is minimal relative to that of formaldehyde in the wood smoke.     

Growth Stresses in the Oxide Scales on TiAl Alloys at 800 and 900°C

In the oxidation of TiAl alloys, the role of scale-growth stresses formed during oxidation has, thus far, been unknown. In the present paper the oxide-growth stresses were investigated by the deflection-test method in monofacial oxidation (DTMO) accompanied by acoustic-emission measurements. On unmodified surfaces the growth stresses are compressive and reach levels of around –100 MPa. At the same time, significant acoustic emission occurs indicating that even under isothermal conditions, stresses are relieved by a scale-cracking mechanism. For oxide scales on TiAl surfaces, which had been ion implanted with chlorine before oxidation, a very thin protective alumina layer is formed which, however, develops growth stresses in the range of several GPa, accompanied by intensive acoustic emission. In all stress–time curves, a dynamic situation is observed. This consists of phases of stress relief by scale microcracking and phases of stresses increase due to crack healing and further oxide growth. As a result, the level of stress as a function of oxidation time, is characterized by an oscillating course.     

Comparison of Solutions of the Problems of Elasticity Theory for Different Near-Boundary Elements

We consider three types of near-boundary elements: curvilinear quadrangles and families of arcs and points, and their application to a two-dimensional problem of the static theory of elasticity with boundary conditions in displacements. The comparison of the theoretical and numerical aspects of the obtained solutions is performed. It is shown that the accuracy of evaluation of the components of the vector of displacements increases in the following cases: in the case of complete quantization of the near-boundary region (but not in the case of its partial quantization or quantization with overlapping), in the case where the numbers of arcs and points increase, and in the case of simultaneous application of different types of near-boundary elements (specifically, quadrangles and families of arcs).     

Synthesis and Structure of Complexes of Np(V) Perchlorate and Np(V) Chloride with Urea

The crystal structure of [NpO₂{OC(NH₂)₂}₅]ClO₄·H₂O and [NpO₂Cl{OC(NH₂)₂}₄] was studied by X-ray diffraction. The electronic absorption spectra of these complexes were recorded. The coordination polyhedron of Np in both complexes is a distorted pentagonal bipyramid. There is no cation-cation interaction of neptunyl cations in these complexes.     

Effects of solidification structure on fatigue crack initiation and fatigue strength in Al−Si−Mg cast alloys

Rotating-bending uniaxial fatigue tests and micro-fatigue crack initiation tests were carried out using a permanent mold cast (PMC) and semi-solid die cast (SDC) with Al−7%Si−0.35%Mg composition in order to examine the relationship between solidification structures and fatigue behaviors. The crack length was measured using a replication method. Fatigue strength was improved in SDC, which was almost consistent with the predicted fatigue strength using the size of Si particle cluster. Resistance to fatigue crack initiation and fatigue strength were improved in SDC owing to the finer Si cluster and to higher ultimate tensile strength. Fatigue crack in PMC was preferentially initiated at pores. For SDC, the fatigue crack was initiated at the Si particle/matrix interface, and then sucessively grew along eutectic cell boundaries.     

Volatile Compounds of Raw Beef from 5 Local Spanish Cattle Breeds Stored Under Modified Atmosphere

Volatile compounds of raw beef from Asturiana de los Valles, Morucha, Parda Alpina, Pirenaica, and Retinta cattle breeds were studied. Steaks were packaged under 60% O₂, 30% CO₂, and 10% N₂, and 53 volatile compounds were tentatively identified by purge‐and‐trap extraction and gas chromatography with mass spectrometry after 0, 5, 10, and 15 d of chill storage. The degradation of beef quality with increasing storage time was evidenced by the increase in 2,3,3‐trimethylpentane, 2,2,5‐trimethylhexane, 3‐octene, 3‐methyl‐2‐heptene, 2‐octene, and 2‐propanone and by the decrease in dimethyl sulfide. Consequently, some of the volatile compounds, which are believed to be formed by thermal degradation of meat, might be formed during chill storage, and the rate of formation of some was dependent on the specific compound.