A multivariate surface roughness modeling and optimization under conditions of uncertainty

Correlated responses can be written in terms of principal component scores, but the uncertainty in the original responses will be transferred and will influence the behavior of the regression function. This paper presents a model building strategy that consider the multivariate uncertainty as weighting matrix for the principal components. The main objective is to increase the value of R² predicted to improve model’s explanation and optimization results. A case study of AISI 52100 hardened steel turning with Wiper tools was performed in a Central Composite Design with three-factors (cutting speed, feed rate and depth of cut) for a set of five correlated metrics (R_a, R_y, R_z, R_q and R_t). Results indicate that different modeling methods conduct approximately to the same predicted responses, nevertheless the response surface to Weighted Principal Component – case b – (WPC1^b) presented the highest predictability.     

SANS investigation of PDMS hybrid materials prepared by gamma-irradiation

Gamma-irradiation from a ⁶⁰Co source was used to prepare hybrid materials from a mixture of polydimethylsiloxane with tetraethylortosilicate and zirconium propoxide.The obtained materials are monolithic and transparent after drying in air. They had been previously characterized by thermal analysis, X-ray diffraction, Rutherford backscattering and elemental analysis. The present work reports a small angle neutron scattering study on a few samples of these materials to investigate their microstructure at the nanoscale. This study showed the presence of inorganic oxide regions with mass fractal structure, their size and fractal density increasing with the tetraethylortosilicate content. Although the presence of zirconium propoxide is required to obtain a stable hybrid material yet the increase in its content leads to less dense mass fractal oxide units. It was found that the structure of the oxide regions developed through a reaction-limited aggregation mechanism. The further addition of isopropanol in the sample preparation stage causes the inorganic fractal structure to extend over the whole sample.     

Mechanical behavior of prosthesis in Toucan beak (Ramphastos toco)

The purpose of this study is to characterize the structure of the beak of Toco Toucan (Ramphastos toco) and to investigate means for arresting fractures in the rhinotheca using acrylic resin. The structure of the rhamphastid bill has been described as a sandwich structured composite having a thin exterior comprised of keratin and a thick foam core constructed of mineralized collagenous rods (trabeculae). The keratinous rhamphotheca consists of superposed polygonal scales (approximately 50 µm in diameter and 1 µm in thickness). In order to simulate the orientation of loading to which the beak is subjected during exertion of bite force, for example, we conducted flexure tests on the dorso-ventral axis of the maxilla. The initially intact (without induced fracture) beak fractured in the central portion when subjected to a force of 270 N, at a displacement of 23 mm. The location of this fracture served as a reference for the fractures induced in other beaks tested. The second beak was fractured and repaired by applying resin on both lateral surfaces. The repaired maxilla sustained a force of 70 N with 6.5 mm deflection. The third maxilla was repaired similarly except that it was conditioned in acid for 60 s prior to fixation with resin. It resisted a force of up to 63 N at 6 mm of deflection. The experimental results were compared with finite element calculations for unfractured beak in bending configuration. The repaired specimens were found to have strength equal to only one third of the intact beak. Finite element simulations allow visualization of how the beak system (sandwich shell and cellular core) sustains high flexural strength.     

Immunomodulatory Properties of Umbilical Cord Blood-Derived Small Extracellular Vesicles and Their Therapeutic Potential for Inflammatory Skin Disorders

Umbilical cord blood (UCB) has long been seen as a rich source of naïve cells with strong regenerative potential, likely mediated by paracrine signals. More recently, small extracellular vesicles (sEV), such as exosomes, have been shown to play essential roles in cell-to-cell communication, via the transport of numerous molecules, including small RNAs. Often explored for their potential as biomarkers, sEV are now known to have regenerative and immunomodulating characteristics, particularly if isolated from stem cell-rich tissues. In this study, we aim to characterize the immunomodulating properties of umbilical cord blood mononuclear cell-derived sEV (UCB-MNC-sEV) and explore their therapeutic potential for inflammatory skin diseases. UCB-MNC-sEV were shown to shift macrophages toward an anti-inflammatory phenotype, which in turn exert paracrine effects on fibroblasts, despite previous inflammatory stimuli. Additionally, the incubation of PBMC with UCB-MNC-sEV resulted in a reduction of total CD4⁺ and CD8⁺ T-cell proliferation and cytokine release, while specifically supporting the development of regulatory T-cells (Treg), by influencing FOXP3 expression. In a 3D model of psoriatic skin, UCB-MNC-sEV reduced the expression of inflammatory and psoriatic markers IL6, IL8, CXCL10, COX2, S100A7, and DEFB4. In vivo, UCB-MNC-sEV significantly prevented or reversed acanthosis in imiquimod-induced psoriasis, and tendentially increased the number of Treg in skin, without having an overall impact on disease burden. This work provides evidence for the anti-inflammatory and tolerogenic effect of UCB-MNC-sEV, which may be harnessed for the treatment of Th17-driven inflammatory skin diseases, such as psoriasis.     

TOPOS – A new constructive algorithm for nesting problems

Abstract. In this paper we present a new constructive algorithm for nesting problems. The layout is built by successively adding a new piece to a partial solution, i.e. to the set of pieces previously nested. Several criteria to choose the next piece to place and its orientation are proposed and tested. Different objective functions are also proposed to evaluate and compare partial solutions. A total of 126 variants of the algorithm, generated by the complete set of combinations of criteria and objective functions, are computationally tested.     

The impact of CO2 taxation on the configuration of new refineries: An application to Brazil

This article evaluates the impact of pricing CO₂ emissions over the configuration of new refinery complexes in their conceptual phase. Two refineries’ schemes were simulated through a linear programming optimization model in order to compare the optimum configuration obtained before and after the input of different CO₂ prices. The cases analyzed represent refining projects to be located in Brazil, a growing market for fuels and petrochemical feedstocks, as well as an oil producing country with rising crude exports. After 2012, emerging countries, such as Brazil, may adopt carbon emission reduction targets. Therefore, it is worth analyzing the impact of pricing CO₂ emissions in these countries, where the majority of new refining projects will be located. Our findings indicate that the initial refinery configurations proposed are quite rigid technologically for CO₂ prices up to US$ 100/t CO₂. For CO₂ prices higher than US$ 100/t CO₂, refineries reduced their emissions by increasing the consumption of natural gas used to produce hydrogen, and through changes in the original configurations towards less-energy consuming process units. Promising technological advances, such as carbon capture and storage (CCS), can also diminish the rigidity of the model and facilitate actions to curb carbon emissions.     

Effect of sugars on the association between cowpea vicilin (7S storage proteins) and fungal cells

Vicilins (7S storage proteins) found in various legume seeds have been previously shown to interfere with the germination of spores or conidia of phytopathogenic fungi and inhibit yeast growth and glucose stimulated acidification of the medium by yeast cells. In the present work vicilins from cowpea (Vigna unguiculata) seeds were added to the growth medium of Saccharomyces cerevisiae cells and Fusarium oxysporum conidia. Helix pomatia lectin, wheat germ agglutinin and Ulex europaeus lectin were used to identify differences in the binding of the vicilins to the surface of cells of S. cerevisiae and F. oxysporum treated with this protein. After the growth period, the material in suspension (yeast cells) was centrifuged and the final pellet was also treated with different sugar (glucose, sucrose, glucosamine, N-acetyl-glucosamine) concentrations and 0.1 M HCl for extraction of vicilins associated to chitinous structures present in yeast cells. Our results showed that vicilin sub-units were present in the different sugar extracts of yeast cells pretreated with the vicilins and these proteins were eluted by 0.5 M solutions of sugars in the following order of efficiency of elution: N-acetyl-glucosamine, sucrose/glucose and glucosamine.     

Effects of different surface treatments of zirconia on the bond strength of self-adhesive resinous cement

Purpose: The aim of this study was to evaluate the effects of different zirconia surface treatments on the bond strength of two self-adhesive resinous cements (SARC).

Methods: Two hundred and eight cylindrical specimens were obtained from Y-TZP zirconia (half with diameter 3.2 mm and half with 4.8 mm). After sintering and polishing, specimens were divided into four groups (n = 26), according to surface treatment: Control (no treatment); Sandblasting (Al₂O₃ particles); Rocatec (Al₂O₃ particles, tribochemical silica coating and silane application); Laser (Nd: YAG laser: 20 Hz, 100 mJ, 0.2 J/cm²). The surface roughness (Ra) was evaluated after the surface treatments, and the groups were divided into two subgroups (n = 13), according to the SARC tested: RelyX U200 and Bifix SE. The 2.2-mm cylinders were bonded to 4.8-mm cylinders and stressed until failure under shear using a universal testing machine. Bond strength and Ra were analyzed using ANOVA, and Tukey’s test (α = 0.05).

Results: Surface treatment was significant (p < 0.0001), but cement type (p = 0.73) was not. Related to roughness, significant differences were found for the treatment type (p < 0.0001), with laser being the treatment with higher Ra values.

Conclusions: Nd:YAG laser produced a rougher surface and a higher bond strength compared with sandblasting, silicatization, and control groups.