Mechanisms of 1D crystal growth in reactive vapor transport: indium nitride nanowires

Indium nitride (InN) nanowire synthesis using indium (In) vapor transport in a dissociated ammonia environment (reactive vapor transport) is studied in detail to understand the nucleation and growth mechanisms involved with the so-called "self-catalysis" schemes. The results show that the nucleation of InN crystal occurs first on the substrate. Later, In droplets are formed on top of the InN crystals because of selective wetting of In onto InN crystals. Further growth via liquid-phase epitaxy through In droplets leads the growth in one dimension (1D), resulting in the formation of InN nanowires. The details about the nucleation and growth aspects within these self-catalysis schemes are rationalized further by demonstrating the growth of heteroepitaxially oriented nanowire arrays on single-crystal substrates and "tree-like" morphologies on a variety of substrates. However, the direct nitridation of In droplets using dissociated ammonia results in the spontaneous nucleation and basal growth of nanowires directly from the In melt surface, which is quite different from the above-mentioned nucleation mechanism with the reactive vapor transport case. The InN nanowires exhibit a band gap of 0.8 eV, whereas the mixed phase of InN and In(2)O(3) nanowires exhibit a peak at approximately 1.9 eV in addition to that at 0.8 eV.     

Effect of hydrocarbon chain length of amphiphilic ruthenium dyes on solid-state dye-sensitized photovoltaics

We studied the influence of the hydrophobic hydrocarbon chain length of amphiphilic ruthenium dyes on the device performance in solid-state dye-sensitized solar cells. We found that the dyes with longer hydrocarbon chains gave higher efficiency values when used as a sensitizer in solid-state dye-sensitized solar cells. With increasing chain length, we observed higher currents and open-circuit voltages up to a limiting chain length. We attribute this improvement to the expected larger distance between TiO2 and the hole conductor, which seems to suppress recombination effectively.     

Single crystalline nickel nanorods inside carbon nanotubes: growth behavior, structure, and magnetic properties

Nickel nanorods with diameters ranging from 5 to 10 nm, encapsulated inside the carbon nanotubes, are prepared using microwave plasma chemical vapor deposition. High-resolution transmission electron microscopy (HRTEM) studies reveal the perfect crystalline nature of the rods with d-spacing closely matching the (111) interplanar spacing of Ni. The (111) planes of the Ni nanorods are always aligned at 39.6 degrees with respect to the graphite planes of the nanotubes. The cosine component of the d-spacing along the direction of the graphite planes is found to be 1.6 A; exactly half the d-spacing between the graphite planes. The electron diffraction pattern shows clear spots corresponding to Ni structure. The field cooled and zero field cooled magnetization data reveal the reversibility of the magnetization of the Ni nanorods and show a blocking temperature of 195 K, which correspond to energy barrier of 0.4 eV/(V).     

Comparative economic analysis of the impacts of mean cell retention time and denitrification on aeration systems

Biological nutrient removal is practiced in various modifications of the activated sludge process (ASP) throughout the world. This paper compares conventional, nitrifying-only and combined nitrifying/denitrifying (NDN) processes. The authors performed 113 oxygen transfer efficiency measurements with the off-gas method over 20 years. This dataset was analysed and used to perform an economic analysis for three example scenarios, one for each layout (conventional, nitrifying-only and NDN). Field oxygen transfer efficiency and relevant plant operative costs and credits were considered (i.e., aeration cost, sludge disposal cost, methane production credit). The conclusion is that NDN operations always have lower aeration costs, and generally have the lowest combined operating cost. Reduced aeration costs result because of improved aeration efficiency at higher mean cell retention times and the use of nitrate as an electron acceptor. The improved aeration efficiency overcomes the increased oxygen required at higher cell retention time due to cell decay.     

Greenhouse gas production: a comparison between aerobic and anaerobic wastewater treatment technology

Anaerobic wastewater treatment offers improved energy conservation with potential reduction in greenhouse gas emissions. Pitfalls exist in that the methane produced in anaerobic treatment can offset any reductions in carbon dioxide emissions, if it is released to the environment. This paper analyzes greenhouse gas emissions from both aerobic and anaerobic treatment systems, including sludge digestion and the losses of dissolved methane in digested biosolids and process effluents. There exists cross over points, ranging from 300 to 700 mg/L influent wastewater BODu, which are functions of the efficiency of the aerobic treatment system. Anaerobic treatment becomes favorable when treating influents higher in concentrations than the cross over values. A technology to recover dissolved methane would make anaerobic treatment favorable at nearly all influent strengths.     

Enrichment of excess 210Po in anoxic ponds

We have investigated the cycling of naturally occurring 210Po in waters from seasonally anoxic Pond B (South Carolina) and permanently anoxic Jellyfish Lake (Palau Islands, western Pacific Ocean). The maximum 210Po activity in Pond B was about 14 mBq L(-1) during summer. This activity was much higher than its parent 210Pb activity, indicating excess 210Po inputs from bottom sediments. The summertime excess 210Po activity was accompanied by increases in Fe and Mn, suggesting 210Po diffusion from bottom sediments under reducing conditions. Activity of 210Po was much lower underwinter oxic conditions, most likely a consequence of efficient coprecipitation with Fe and Mn oxides that occurs with destruction of Pond B stratification. In permanently anoxic Jellyfish Lake, the maximum activity of 210Po was 133 mBq L(-1), among the highest reported from any surface aqueous environment. A box model suggests that the release of only 2% of 210Po, produced from the 210Pb in the bottom sediments, would account for the observed excess. Our results suggest that 210Po can be naturally enriched in anoxic environments to a high level, perhaps in concert with the Fe and Mn redox cycles.     

Antibacterial effect of caprylic acid and monocaprylin on major bacterial mastitis pathogens

Bovine mastitis is the most significant economic drain on the worldwide dairy industry. Concerns regarding poor cure rates, emergence of bacterial resistance, and residues in milk necessitate development of alternative therapeutic approaches to antibiotics for treatment of mastitis. A variety of free fatty acids and their monoglycerides have been reported to exert antimicrobial activity against a wide range of microorganisms. The objective of our study was to examine the efficacy of caprylic acid, a short-chain fatty acid, and its monoglyceride, monocaprylin, to inactivate common mastitis pathogens, including Streptococcus agalactiae, Streptococcus dysgalactiae, Streptococcus uberis, Staphylococcus aureus, and Escherichia coli. Milk samples containing 50 mM or 100 mM caprylic acid, and 25 mM or 50 mM monocaprylin were inoculated separately with a 3-isolate mixture of each of the 5 pathogens, and incubated at 39°C. Populations of surviving bacteria were determined at 0 min, 1 min, 6 h, 12 h, and 24 h of incubation. Both caprylic acid and monocaprylin reduced all 5 pathogens by >5.0 log cfu/mL after 6 h of incubation. Among the bacterial species tested, Strep. agalactiae, Strep. dysgalactiae, and Strep. uberis were most sensitive, and E. coli was most tolerant to caprylic acid and monocaprylin. Results of this study indicate that caprylic acid and monocaprylin should be evaluated as alternatives or adjuncts to antibiotics as intra-mammary infusion to treat bovine mastitis.     

(2S,12Z)-2-Acetoxy-12-heptadecene: Major Sex Pheromone Component of Pistachio Twig Borer, Kermania pistaciella

The sex pheromone of the pistachio twig borer, Kermania pistaciella (Lepidoptera: Oinophilidae), one of the most important insect pests of pistachio, Pistacia vera, in Turkey and Iran, was identified. In gas chromatographic-electroantennographic detection (GC-EAD) and GC-mass spectrometric analyses of pheromone gland extracts of female K. pistaciella from Turkey, (2S,12Z)-2-acetoxy-12-heptadecene was identified as the major candidate pheromone component. In field experiments in Turkey, lures containing synthetic (2S,12Z)-2-acetoxy-12-heptadecene attracted large numbers of male moths. Its attractiveness was significantly reduced by the presence of the R-enantiomer or of either enantiomer of the corresponding alcohol. (2S,12Z)-2-Acetoxy-12-heptadecene is the first pheromone component identified in the Oinophilidae and the first secondary acetate pheromone component identified in the Lepidoptera. An erratum to this article can be found at     

The first experimental results from x-ray imaging crystal spectrometer for KSTAR

The x-ray imaging crystal spectrometer (XICS) for the Korea Superconducting Tokamak Advanced Research has been first applied for the experimental campaign in 2009. The XICS was designed to provide measurements of the profiles of the ion and electron temperatures from the heliumlike argon (Ar XVII) spectra. The basic functions of the XICS are properly working although some satellites lines are not well matched with the expected theoretical values. The initial experimental results from the XICS are briefly described.