The feasibility of chromium(VI) to induce graft copolymerization of methyl methacrylate onto nylon-6 was investigated in the presence of nitrogen. The rate of grafting was determined by varying monomer concentration, chromium(VI) concentration, temperature, acidity of the medium, solvents, inorganic salts, and redox system. The graft yield increases significantly by increasing the monomer concentration. The graft yield increases with increase of [Cr(VI)] up to 0.025 mole/liter. With further increase of [Cr(VI)], the graft yield decreases. The increase of acid concentration up to 0.395 mole/liter results the increase in graft yield. Beyond this concentration the graft yield decreases. The graft yield increases with increase in temperature up to 55°C and thereafter it decreases. The graft yield is medium dependent. The graft yield increases with increasing thiourea concentration upto 0.0025 mole/liter but beyond this concentration, the percentage graft yield decreases. A suitable kinetic scheme has been proposed and the rate equation has been evaluated. 相似文献
The effect of carbon black concentration on the dynamic mechanical properties of bromobutyl rubber vulcanizates has been studied over a wide range of temperature (– 150 to + 250 °C), frequency (3.5 to 110 Hz) and dynamic strain amplitude (0.07 to 5%). The influence of carbon black concentration on the glass-rubber transition has also been investigated with respect to the isochronal variation in dynamic properties. The influence of carbon black concentration consists mainly of the change in the levels of the moduli values in the glassy and rubbery state. In the glassy region; the increase in stiffness with carbon black loading may be fully explained by the hydrodynamic effect of the carbon black particles embedded in the polymer continuum. With increased carbon black concentration the glass-rubber transition temperature (tan peak temperature) does not show a shift in its location but peak shoulder broadening and decrease in peak height are observed. At a particular temperature, the effect of carbon black concentration on dynamic properties of bromobutyl rubber is dependent on the combined effects of applied strain amplitude and frequency. With increase in filler concentration the thermal stability of the vulcanizate increases. 相似文献
Image Completion plays a vital role in compressed sensing, machine learning, and computer vision applications. The Rank Minimization algorithms are used to perform the image completion. The major problem with rank minimization algorithms is the loss of information in the recovered image at high corruption ratios. To overcome this problem Lifting wavelet transform based Rank Minimization (LwRM), and Discrete wavelet transform based Rank Minimization (DwRM) methods are proposed, which can recover the image, if the corrupted observations are more than 80%. The evaluation of the proposed methods are accomplished by Full Reference Image Quality Assessment (FRIQA) and No Reference Image Quality Assessment (NR-IQA) metrics. The simulation results of proposed methods are superior to state-of-the-art methods.
Information Systems Frontiers - Ransomware is a self-propagating malware encrypting file systems of the compromised computers to extort victims for financial gains. Hundreds of schools, hospitals,... 相似文献
International Journal of Control, Automation and Systems - The system of multiple agents working in coordination for a given task has several advantages on faster completion, fault-tolerance, etc.... 相似文献
The presence of alkali ions has reportedly improved the performance of CIGS/CZTS–based thin-film solar cells. The out-diffusion of the alkali ion, in particular, Na, from the glass substrate offers a facile scalable route of supplying the alkali ions during the growth of the absorber layer. In this work, we demonstrate the diffusion of different alkali ions (Li/Na/K) from composition tuned glasses with intentionally incorporated excess alkali ions into a thin Mo film, typically used as a bottom electrode in solar cells. We also evaluate the physical, mechanical, and thermal properties of the glasses for suitability as a substrate in thin-film deposition. The out-diffusion of alkali ions to the overlayer is found to be critically influenced by the composition and the local structure of the glasses. The Na ions exhibit the highest extent of diffusion among the alkali ions present in glass substrates, while that for the K-ions is the lowest. For the glasses with mixed alkali ions, the presence of Li facilitated the out-diffusion of Na, whereas K ions appear to inhibit the same. Differently with the existing reports, we show that the activation energy and the presence of Ca ions as additional modifiers play a crucial role in the transport mechanism of the ions. In addition, the synthesized glasses exhibit hardness of the order 5-7 GPa, density ~2.55 g cm-3. The glass transition temperature lies between 535 and 580°C and the coefficient of thermal expansion 8.5-10 ppm/K, which is highly suitable for use as substrates in thin-film solar cells. 相似文献
In this article, modification of carbon fiber surface by carbon based nanofillers (multi-walled carbon nanotubes [CNT], carbon nanofibers, and multi-layered graphene) has been achieved by electrophoretic deposition technique to improve its interfacial bonding with epoxy matrix, with a target to improve the mechanical performance of carbon fiber reinforced polymer composites. Flexural and short beam shear properties of the composites were studied at extreme temperature conditions; in-situ cryo, room and elevated temperature (−196, 30, and 120°C respectively). Laminate reinforced with CNT grafted carbon fibers exhibited highest delamination resistance with maximum improvement in flexural strength as well as in inter-laminar shear strength (ILSS) among all the carbon fiber reinforced epoxy (CE) composites at all in-situ temperatures. CNT modified CE composite showed increment of 9% in flexural strength and 17.43% in ILSS when compared to that of unmodified CE composite at room temperature (30°C). Thermomechanical properties were investigated using dynamic mechanical analysis. Fractography was also carried out to study different modes of failure of the composites. 相似文献
Carbon fiber reinforced epoxy (CE) composite is ideal for a cryogenic fuel storage tank in space applications due to its unmatched specific strength and modulus. In this article, inter-laminar shear strength (ILSS) of carbon fiber/epoxy (CE) composite is shown to be considerably improved by engineering the interface with carboxyl functionalized multi-walled carbon nanotube (FCNT) using electrophoretic deposition technique. FCNT deposited fibers from different bath concentrations (0.3, 0.5, and 1.0 g/L) were used to fabricate the laminates, which were then tested at room (30°C) and in-situ liquid nitrogen (LN) (−196°C) temperature as well as conditioning for different time durations (0.25, 0.5, 1, 6, and 12 h) followed by immediate RT testing to study the applicability of these engineered materials at the cryogenic environment. A maximum increment in ILSS was noticed at bath concentration of 0.5 g/L, which was ~21% and ~ 17% higher than neat composite at 30°C and − 196°C, respectively. Short-term LN conditioning was found to be detrimental due to developed cryogenic shock, which was further found to be compensated by cryogenic interfacial clamping upon long-term exposure. 相似文献