Studies on Silicon Containing Nano-hybrid Epoxy Coatings for the Protection of Corrosion and Bio-Fouling on Mild Steel

An epoxy nano-composite coating was developed using amine functionalized nZnO (in the amount of 2.5 %, 5.0 % and 7.5 wt %) as the dispersed phase and a commercially available epoxy resin as the matrix phase. The structural features of these materials were ascertained by FT-IR spectral studies. The anti-corrosive properties of the epoxy/nZnO hybrid coatings in comparison with a virgin coating were investigated by a salt spray test and electrochemical impedance spectroscopy technique. The surface morphology determined by SEM, indicates that nZnO particles were dispersed homogenously through the epoxy polymer matrix. The results showed improved antifouling and anticorrosive properties for epoxy-nZnO hybrid coatings.     

KINETICS OF URANIUM EXTRACTION BY MACROPOROUS BIFUNCTIONAL PHOSPHINIC ACID RESIN

ABSTRACT

The rate of extraction of uranium by macroporous bifunctional phosphinic acid (MPBPA) resin from nitric acid medium has been studied under particle diffusion controlled conditions. The internal diffusion coefficient was found to increase with increase in temperature and decrease with increase in particle size. The activation energies and entropies suggest that the extraction of uranium essentially follows ion exchange mechanism at low concentration of nitric acid while it is through linkage of >P=0 group of the resin at high concentrations.     

One‐Dimensional Pseudo‐Homogeneous Packed‐Bed Reactor Modeling: I. Chemical Species Equation and Effective Diffusivity

Packed‐bed reactor experimentation is a key tool used in order to formulate chemical kinetics. The chemical species equation and overall methodology are described for a one‐dimensional pseudo‐homogeneous packed‐bed reactor model useful for experimental calibration of chemical kinetics. Over the history of simulation development for this equation there exist numerous different effective diffusivity correlations. The included historical review and parametric study of these correlations help to determine the correct choice based on numerical simplicity and model outcomes. A subsequent review paper describes the energy equation and effective thermal conductivity correlations while coming to a generalized conclusion regarding modeling efforts.     

Impact of density gradients on the fluid flow inside a vibrating cavity subjected to soret effect

Computational fluid dynamics simulations of thermovibrational flows in a square cavity filled with a water–isopropanol mixture has shown that inaccurate density calculations can predict very different flow behaviours. Specifically, comparison has been made between two density calculation models, viz., a weighted‐average scheme and the Perturbed Chain Statistical Associating Fluid Theory equation of state. While the latter approach predicts a stronger flow in the cavity due to the convective instabilities that are induced by the large spatial gradients in density, the weighted‐average scheme cannot predict this since it does not explicitly depend on the temperature of the mixture. © 2012 Canadian Society for Chemical Engineering     

Contribution of organomodified clay on hybrid microstructures and properties of epoxidized natural rubber‐based nanocomposites

Influence of organic modifying agent of clay on dispersion, distribution, hybrid microstructure formation, and associated performance properties of epoxidized natural rubber‐based composites was evaluated. Binary and ternary composites of carbon black (CB) and two organomodified layered silicates (i.e., nanomer I30E and Cloisite 30B) were prepared and characterized based on small angle X‐ray scattering, transmission electron microscopy, hydrodynamic swelling, tensile measurement, and dynamic mechanical analyses. Greater extent of exfoliation and “nanounit” formation was noted in ternary composites containing nanomer I30E, which was reflected in higher interfacial roughness (d_s = 2.82) and lower radius of gyration (R_g = 205 Å). Morphological observations suggested higher nanomer I30E–CB interactions than that of Cloisite 30B–CB. The interplatelet distance in Cloisite 30B (d = 1.83 nm) stacks was lower than that of nanomer I30E (d = 2.26 nm). These two factors jointly contributed in higher breakdown of nanomer I30E stacks by CB than that of Cloisite 30B stacks. Greater exfoliation and nanounit formation in I30E–CB‐filled nanocomposite was also reflected in increased degree of crosslinking (n = 20 × 10^?5%), tensile modulus/strength, half height width of damping peak (20.3°C), and filler effectiveness (C = 0.33). POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Review of Chemical Reactions in the NO Reduction by CO on Rhodium/Alumina Catalysts

The emissions of nitric oxide and carbon monoxide from internal combustion engines are of primary concern due to their impact on the environment and people's health. Since rhodium has proven to be an important catalyst for the reduction of nitric oxide by carbon monoxide, its accurate modeling is of significant value to industry. This paper reviews the literature with respect to this interaction in order to explain the history of the detailed reactions occurring on the surface. This review was accomplished in the absence of other species in order to focus the efforts and reduce the complexity of the task. In addition, this work presents an appropriate global reaction expression based on these detailed reactions for use in one-dimensional aftertreatment catalyst models.     

Phase Constitution During Sintering of Red Mud and Red Mud–Fly Ash Mixtures

The phase constitution during the sintering of pure red mud and red mud–fly ash mixtures was studied in the temperature range of 900°–1250°C. The phases formed at different sintering temperatures were analyzed by X-ray powder diffraction. The phases that are likely to form at equilibrium at any isotherm were predicted using the Gibbs free energy minimization technique and the databases provided in the FactSage software. Although the thermodynamic prediction is in reasonable agreement with the experimental results for the major phases, there is some disagreement regarding the minor phases, especially the more complex phases. The major limitation of the thermodynamic approach presently is the non-availability of thermodynamic data for several complex and multi-component solution phases.     

Polyaniline‐supported acid catalyst: Esterification of cinnamic acid with alcohols

Polyaniline‐supported acid salts such as polyaniline‐hydrochloride, polyaniline‐sulfate, and polyaniline‐nitrate were prepared by oxidation of aniline using benzoyl peroxide and ammonium persulfate as oxidizing agents. Polyaniline salts were used as catalysts in the esterification of cinnamic acid with alcohols. Polyaniline‐sulfate salt was found to be the best catalyst for the esterification of cinnamic acid. The reusability, handling, and recovery of the catalyst were found to be good. The yield of the ester depended on the type of the polyaniline salt, amount of the catalyst, amount of alcohol, and both the time and the temperature of the reaction. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1584–1590, 2005     

Microstructure and Mechanical Property Correlation of Mg-Si Alloys

Silicon - The present work aims at understanding the microstructure and mechanical property correlation of hypo (Mg-0.5, 0.7, 1.15 wt% Si) and hyper (Mg-2, 4, 6, 8 and 10 wt% Si) eutectic binary...