Numerical Analysis of a Vortex Tube: A Review

Ranque–Hilsch vortex tube is a simple devise with no moving parts which could generate cold and hot air/gas streams simultaneously with compressed air/gas as a working fluid. The energy and flow separation in a vortex tube is highly depends on factors like nozzle shape, nozzle number, diameter and length of the vortex tube, inlet pressure, control valve, diaphragm hole size and cold mass fraction. As the energy separation and flow patterns in a vortex tube are highly complex and were not explained successfully by any researcher, a computational study of vortex tube flow and energy separation will give a better understanding about the physics and mechanism involved. Many researchers conducted computational fluid dynamic analysis of the vortex to have a deep insight about the process of flow separation. In this paper computational analysis of vortex by many researchers were presented along with the results obtained and suggestions to improve the performance of the vortex tube. Researchers considered Turbulence models which predict the performance precisely were discussed in the present paper. Researchers considered turbulence models like LES, k–ε, k–ω and RMS to predict the energy separation in vortex tube. Some researchers considered artificial neural networks (ANN) and Taguchi methods for their analysis. Comparison of the predictions with simulation results were also presented to give a clear idea for the reader about the CFD models prediction capabilities.     

Reduced-order controller synthesis with regional pole constraint

A reduced order output feedback controller is designed for a linear time invariant system, which guarantees that the closed-loop poles are placed within some pre-specified stability region in the complex plane. A convex approximation of the non-convex constraints is used to pose a sequence of semi-definite programs, which provide the lowest order proper controller satisfying the approximate constraints. The proposed method is demonstrated on two practical controller design applications.     

Isolation improvement in dual-band astroid shaped MIMO DRA for LTE and ISM applications

This article presents the design of a novel astroid shaped dielectric resonator antenna (DRA) constructed from PTFE Teflon material with a dielectric constant of ε_r = 2.1 and a loss tangent tan δ = 0.0002 on an FR4 grounded substrate for LTE and ISM band applications. Inverted Omega ?-shaped feed along with asymmetric E-shaped dual metallic strips in the partial ground is used to obtain dual-band characteristics. A light weight, cost-effective plastic material is used to design the antenna. An isolation of 26.5 dB and 24.6 dB is achieved in the two frequency bands 1.8 GHz and 2.4 GHz respectively by modifying the ground plane. Metallic strips and stubs in the ground are used to enhance the isolation in the proposed MIMO system. The obtained impedance bandwidths in both the bands are 14.5% and 13%. The performance of the MIMO system is characterized by the envelope correlation coefficient and diversity gain. Good agreement is found between simulated and measured results.     

Improvement in performances of dye-sensitized solar cell with SiO2-coated TiO2 photoelectrode

The pure TiO2 and the nano-porous SiO2-coated TiO2 (STO) films were deposited on the FTO substrates by spray technique for the application of dye-sensitized solar cells (DSSCs). XRD pattern shows the pure TiO2 and STO films exhibits the same structure. We found that there is no much difference in dye absorption between the STO and the pure TiO2 films. The electrochemical impedance spectra reveal that insulating nature of the porous SiO2 increases surface resistance of the TiO2 film and supresses back transfer of the photogenerated electrons to the electrolyte. The field-emission scanning electron microscopy (FE-SEM) and energy dispersion X-ray spectroscopy (EDS) reveal that the surface morphology and the existence of SiO2 layer on the surface of the TiO2 films, respectively. The photoelectrochemical results show that the short-circuit photocurrent (J(SC)) increased from 16.73 mA cm(-2) to 18.31 mA cm(-2) and the open-circuit voltage (V(OC)) value changed from 0.71 V to 0.74 V for the STO films. The efficiency of cell has been greatly improved from 8.25 to 9.3%.     

Enhanced wound healing activity of Ag–ZnO composite NPs in Wistar Albino rats

In the present study, silver (Ag) and Ag–zinc oxide (ZnO) composite nanoparticles (NPs) were synthesised and studied their wound‐healing efficacy on rat model. Ultraviolet–visible spectroscopy of AgNPs displayed an intense surface plasmon (SP) resonance absorption at 450 nm. After the addition of aqueous Zn acetate solution, SP resonance band has shown at 413.2 nm indicating a distinct blue shift of about 37 nm. X‐ray diffraction analysis Ag–ZnO composite NPs displayed existence of two mixed sets of diffraction peaks, i.e. both Ag and ZnO, whereas AgNPs exhibited face‐centred cubic structures of metallic Ag. Scanning electron microscope (EM) and transmission EM analyses of Ag–ZnO composite NPs revealed the morphology to be monodispersed hexagonal and quasi‐hexagonal NPs with distribution of particle size of 20–40 nm. Furthermore, the authors investigated the wound‐healing properties of Ag–ZnO composite NPs in an animal model and found that rapid healing within 10 days when compared with pure AgNPs and standard drug dermazin.Inspec keywords: wounds, tissue engineering, biomedical materials, nanocomposites, nanofabrication, nanomedicine, silver, zinc compounds, II‐VI semiconductors, wide band gap semiconductors, ultraviolet spectra, visible spectra, nanoparticles, particle size, surface plasmon resonance, spectral line shift, X‐ray diffraction, scanning electron microscopy, transmission electron microscopyOther keywords: enhanced wound healing activity, Ag‐ZnO composite nanoparticles, Wistar Albino rats, wound‐healing efficacy, ultraviolet‐visible spectroscopy, intense surface plasmon resonance absorption, aqueous Zn acetate solution, SP resonance band, blue shift, X‐ray diffraction analysis, diffraction peaks, face‐centred cubic structures, scanning electron microscope, SEM, transmission electron microscope, TEM, monodispersed hexagonal nanoparticles, quasihexagonal nanoparticles, particle size, animal model, time 10 d, size 20 nm to 40 nm, Ag‐ZnO     

Junction like behavior in polycrystalline diamond films

We have successfully fabricated polycrystalline diamond rectifying junction devices on n-type (1 0 0) silicon substrates by Hot Filament Chemical Vapor Deposition (HFCVD) using methane/hydrogen process gas and trimethyl borate and trimethyl phosphite dissolved in acetone as p- and n-type dopants, respectively. Impedance spectroscopy and current-voltage analysis indicates that the conduction is vertical down the grains and facets and not due to surface effects. Electrical characteristics were analyzed with In and Ti/Au top metal contacts with Al as the substrate contact. Current-voltage characteristics as a function of temperature showed barrier potentials of 1.1 eV and 0.77 eV for the In and Ti/Au contacts, respectively. Barrier heights of 4.8 eV (In) and 4.4 eV (Ti/Au) were obtained from capacitance-voltage measurements.     

Microchip capillary electrophoresis with electrochemical detection of thiol-containing degradation products of V-type nerve agents

A microchip protocol for the capillary electrophoresis separation and electrochemical detection of thiol-containing degradation products of V-type nerve agents is described. The microchip assay relies on the derivatization reaction of 2-(dimethylamino)ethanethiol (DMAET), 2-(diethylamino)ethanethiol (DEAET), and 2-mercaptoethanol (ME) with o-phthaldialdehyde in the presence of the amino acid valine along with amperometric monitoring of the isoindole derivatives. Both off-chip and on-chip derivatization reactions have led to highly sensitive and rapid detection of the thiol degradation products. Various parameters influencing the derivatization, separation, and detection processes were examined and optimized. These include the amino acid co-reagent, reagent-mixing ratio, reaction time, injection time, separation voltage, and detection potential. The chip microsystem offers a rapid (<4 min) simultaneous detection of micromolar concentrations of DMAET, DEAET, and ME. Linear calibration plots were observed for the V-type nerve agent thiol degradation products, along with good stability and reproducibility (RSD < 8.0%). Detection limits of 5 and 8 microM were obtained for the off-chip reaction of DMAET and DEAET, respectively, following a 2-s injection. The suitability for assays of environmental matrixes was demonstrated for the determination of DMAET and DEAET in untreated tap and river water samples. The favorable analytical performance makes the new microfluidic device attractive for addressing the needs of various security scenarios.     

Formulation of Rosuvastatin-Loaded Self-Nanoemulsifying Drug Delivery System Using Box-Behnken Design

The objectives of present study were to understand the effect of formulation variables of self-nanoemulsifying drug delivery system (SNEDDS) of rosuvastatin (RSV). Box-Behnken design in conjunction with desirability function was used to evaluate the main effect, interaction effect and quadratic effect of independent formulation variables that included amounts of Acconon 200 E6, Cremophor RH40, and Lipoxol 300. For a better understanding of the selected variables for the optimal performance of RSV SNEDDS, the models were presented as three-dimensional response surface graphs. A fresh batch of optimized formulations and were prepared with optimized levels of the independent variables to yield dependent variables (Y1–Y6) values that were remarkably close to the predicted values. Drug excipient compatibility studies using the Fourier transform infrared spectroscopy, differential scanning calorimeter and x-ray diffraction indicated the absence of any incompatibility between RSV and selected excipients. The transmission electron microscopy of selected optimized SNEDDS of RSV showed the spherical shape of globules with no signs of coalescence and precipitation of RSV. The study demonstrates the use of Box-Behnken design for the preparation of RSV SNEDDS. The desirable goals can be obtained by systematic formulation approach in minimum possible time.     

Cell proliferation,viability, and in vitro differentiation of equine mesenchymal stem cells seeded on bacterial cellulose hydrogel scaffolds

The culture of multipotent mesenchymal stem cells on natural biopolymers holds great promise for treatments of connective tissue disorders such as osteoarthritis. The safety and performance of such therapies relies on the systematic in vitro evaluation of the developed stem cell-biomaterial constructs prior to in vivo implantation. This study evaluates bacterial cellulose (BC), a biocompatible natural polymer, as a scaffold for equine-derived bone marrow mesenchymal stem cells (EqMSCs) for application in bone and cartilage tissue engineering. An equine model was chosen due to similarities in size, load and types of joint injuries suffered by horses and humans. Lyophilized and critical point dried BC hydrogel scaffolds were characterized using scanning electron microscopy (SEM) to confirm nanostructure morphology which demonstrated that critical point drying induces fibre bundling unlike lyophilisation. EqMSCs positively expressed the undifferentiated pluripotent mesenchymal stem cell surface markers CD44 and CD90. The BC scaffolds were shown to be cytocompatible, supporting cellular adhesion and proliferation, and allowed for osteogenic and chondrogenic differentiation of EqMSCs. The cells seeded on the BC hydrogel were shown to be viable and metabolically active. These findings demonstrate that the combination of a BC hydrogel and EqMSCs are promising constructs for musculoskeletal tissue engineering applications.     

Device‐Level Photonic Memories and Logic Applications Using Phase‐Change Materials

Inspired by the great success of fiber optics in ultrafast data transmission, photonic computing is being extensively studied as an alternative to replace or hybridize electronic computers, which are reaching speed and bandwidth limitations. Mimicking and implementing basic computing elements on photonic devices is a first and essential step toward all‐optical computers. Here, an optical pulse‐width modulation (PWM) switching of phase‐change materials on an integrated waveguide is developed, which allows practical implementation of photonic memories and logic devices. It is established that PWM with low peak power is very effective for recrystallization of phase‐change materials, in terms of both energy efficiency and process control. Using this understanding, multilevel photonic memories with complete random accessibility are then implemented. Finally, programmable optical logic devices are demonstrated conceptually and experimentally, with logic “OR” and “NAND” achieved on just a single integrated photonic phase‐change cell. This study provides a practical and elegant technique to optically program photonic phase‐change devices for computing applications.