Selective sorption of heavy metal thiocyanate complexes on crown ether resin

The sorption behavior of heavy metal thiocyanate complexes was investigated for dibenzo-18-crown-6 (DB18C6) resin and bis[2-(o-methoxyphenoxy)ethyl]ether (BMPE) resin. The DB18C6 resin showed a high sorption ability and the degree of zinc sorption increased significantly with thiocyanate concentration. This behavior was not observed for BMPE resin. The sorption behavior was influenced by the countercation species, and the degree of sorption of zinc ions showed the maximum when the potassium thiocyanate was used as a complexing salt. The sorbed species appear to be KZn(SCN)₃, K₂Zn(SCN)₄ in the potassium thiocyanate system, and Zn(SCN)₂ in the lithium thiocyanate system, respectively, according to analysis of the sorption equilibrium. Sodium and ammonium thiocyanate systems show an intermediate behavior of the two. The sorption selectivity for DB18C6 resin depended not only on the hydrophobic nature of heavy metal thiocyanate complexes but also on the stabilization of counter cation species with crown ether matrix, and the sorption selectively was found to be effectively controlled by countercation species according to the cation-chelation mechanism.     

Gigabit optical pulse generation with FM mode-locked LiNdP4O12lasers

FM mode locking of an LiNdP4O12(LNP) laser with an intracavity modulator is reported. Mode-locked optical pulses with a pulse width of 49 ps at a repetition rate of 960 MHz, corresponding toc/2L(c:light velocity,L:cavity length), have been obtained. A pulse repetition rate as high as 2.88 GHz has been achieved with a multiple mode-locking technique.     

ArF excimer laser induced CVD of aluminum oxide films

The authors have demonstrated photochemical deposition of aluminum oxides from Trimethylaluminum (TMA) and N₂O by using a pulsed ArF excimer laser (193 nm). Both TMA and N₂O are efficiently photodissociated by the 193 nm light. The films are grown on Si and InP wafers contained in a low pressure flowing cell with a heated substrate. The incident laser beam is focused and parallel to the substrate surface. Typical deposition rates are 80–150 A/min. Stripes of aluminum oxide 30 mm wide are uniformly grown on 7.5 cm Si-wafers. The film composition and purity have been investigated using Auger and Infra-red spectroscopy analysis. Surprising results are the relatively low concentration of carbon. Refractive index and thickness have been determined by an ellipsometer. Typical values for the films are 1.54–1.62. Metal-oxide-semiconductor capacitors have been fabricated and characterized. The C-V curves for n-InP/aluminum oxide have clockwise hysteresis, and minimum loop width is less than 0.5 V. The surface state densities are 1 × 10¹¹ cm^-2 eV⁻¹ at the mid band gap.     

Analyses of mode-hopping phenomena in an AlGaAs laser

Intensity fluctuations of the longitudinal modes of a 0.8 μm AlGaAs laser were precisely measured during the occurrence of hopping between two modes. It was found from this result that mode hopping follows the stochastics of a Poisson process. The frequency of mode hopping was measured asf_{c} = [exp [-95(I/I_{th} - 1)]] times 10^{7}(Hz). whereI/I_{th}is the injection current normalized to its threshold value. Results of analog computer simulations showed that spontaneous emission worked as a triggering force for mode hopping. Results of the analysis based on the Fokker-Planck equation were compared to the experimental results, from which the root-mean-square value of the fluctuating electric field of spontaneous emission was estimated as2.3 times 10^{2)(V/m)leqlanglesim{E}_{N} leq 3.2 times 10^{2}(V/m). It is concluded that an effective reduction of mode hopping is achieved if the laser is operated at a higher bias or if the coupling constant between the two modes is increased.     

Development of a new heterojunction structure (ACJ -HIT) and its application to polycrystalline silicon solar cells

A new solar cell structure named HIT (Heterojunction with Intrinsic Thin layer) has been developed based on new artificially constructed junction (ACJ) technology. In this structure a non-doped a-Si thin layer was inserted between the p(a-Si)/n(c-Si) heterojunction, improving the output characteristics and achieving a conversion efficiency of 18.1%. This structure was applied to cast polycrystalline silicon solar cells of a practical size. A high conversion efficeincy of 13.6% was obtained with a cell size of 10 cm × 10 cm using various technologies, including hydrogen plasma passivation.     

Dynamic Changes in Reactive Oxygen Species in the Shoot Apex Contribute to Stem Cell Death in Arabidopsis thaliana

In monocarpic plants, stem cells are fated to die. However, the potential mechanism of stem cell death has remained elusive. Here, we reveal that the levels of two forms of reactive oxygen species (ROS), superoxide anion free radical (O2·−) and hydrogen peroxide (H₂O₂), show dynamic changes in the shoot apex during the plant life cycle of Arabidopsis thaliana. We found that the level of O2·− decreased and disappeared at four weeks after bolting (WAB), while H₂O₂ appeared at 3 WAB and showed a burst at 5 WAB. The timing of dynamic changes in O2·− and H₂O₂ was delayed for approximately three weeks in clv3-2, which has a longer lifespan. Moreover, exogenous application of H₂O₂ inhibited the expression of the stem cell determinant WUSCHEL (WUS) and promoted the expression of the developmentally programmed cell death (dPCD) marker gene ORESARA 1 (ORE1). These results indicate that H₂O₂ triggers an important signal inducing dPCD in stem cells. Given that O2·− plays roles in maintaining WUS expression and stem cell activity, we speculate that the dynamic shift from O2·− to H₂O₂ in the shoot apex results in stem cell death. Our findings provide novel insights for understanding ROS-mediated regulation during plant stem cell death.     

Mumefural and related HMF derivatives from Japanese apricot fruit juice concentrate show multiple inhibitory effects on pandemic influenza A (H1N1) virus

Fruit-juice concentrate of Japanese apricot (Prunus mume Sieb. et Zucc.) has been shown to be effective against influenza A infection in MDCK cells. In this study, we isolated five components from the fruit-juice concentrate of Japanese apricot, 5-(hydroxymethyl)-2-formylfuran (HMF), 1-[5-(2-formylfuryl)methyl]dihydrogen 2-hydroxypropane-1,2,3-tricarboxylate (mumefural, MF), 2-[5-(2-formylfuryl)methyl]dihydrogen 2-hydroxypropane-1,2,3-tricarboxylate (MF‘), 1-[5-(2-formylfuryl)methyl]hydrogen 1-hydroxyethane-1,2-dicarboxylate (MA1) and 2-[5-(2-formylfuryl)methyl]hydrogen 1-hydroxyethane-1,2-dicarboxylate (MA2), and investigated their inhibitory activities against the novel influenza A/Narita/1/2009 (H1N1) pandemic virus hemagglutinin and neuraminidase functions, which are essential for viral attachment and budding, respectively. An hemagglutination inhibition assay indicated that MF and MF‘ were effective at minimum hemagglutination concentrations of 3.1 and 6.3 mM, respectively. An inhibition study for sialidase activity of the neuraminidase spike showed that MF was the most active anti-sialidase compound with an IC₅₀ value of 0.21 ± 0.01 mM, followed by MA2 (IC₅₀, 0.71 ± 0.09 mM), MA1 (IC₅₀, 1.64 ± 0.31 mM) and MF‘(IC₅₀, 1.62 ± 0.22 mM). Furthermore, MF was shown to inhibit the growth of the pandemic virus in a dose-dependent manner (62 ± 3% inhibition at 5 mM). The results suggest that MF, a citric acid ester linked to HMF at the 1-position of the propane backbone, might be a lead compound for the development of anti-influenza A inhibitors.     

Two types of a passive safety containment for a near future BWR with active and passive safety systems

The paper presents two types of a passive safety containment for a near future BWR. They are named Mark S and Mark X containment. One of their common merits is very low peak pressure at severe accidents without venting the containment atmosphere to the environment. The PCV pressure can be moderated within the design pressure. Another merit is the capability to submerge the PCV and the RPV above the core level. The third merit is robustness against external events such as a large commercial airplane crash. Both the containments have a passive cooling core catcher that has radial cooling channels. The Mark S containment is made of reinforced concrete and applicable to a large power BWR up to 1830 MWe. The Mark X containment has the steel secondary containment and can be cooled by natural circulation of outside air. It can accommodate a medium power BWR up to 1380 MWe. In both cases the plants have active and passive safety systems constituting in-depth hybrid safety (IDHS). The IDHS provides not only hardware diversity between active and passive safety systems but also more importantly diversity of the ultimate heat sinks between the atmosphere and the sea water. Although the plant concept discussed in the paper uses well-established technology, plant performance including economy is innovatively and evolutionally improved. Nothing is new in the hardware but everything is new in the performance.     

Potent antioxidative activity of non‐polyphenolic fraction of green tea (Camellia sinensis) – association with pheophytins a and b

The antioxidative activity of green tea‐derived polyphenols known as catechins has been extensively studied. However, the antioxidative activity of the non‐polyphenolic fraction of green tea has been poorly elucidated and is the subject of the present study. The non‐polyphenolic fraction of green tea showed a significant dose‐dependent suppressive effect against the autooxidation of linoleic acid. The chlorophyll‐related compounds pheophytins a and b showed similar antioxidative activities in the same assay, much higher than those of α‐tocopherol and the green tea catechin (−)‐epigallocatechin‐3‐gallate (EGCG). The non‐polyphenolic fraction of green tea and pheophytins a and b exhibited suppressive activities against superoxide anion (${\bf O}_{2}ˆ{‐}$ ) generation in mouse macrophages induced by 12‐O‐tetradecanoylphorbol‐13‐acetate, showing higher activities than that of EGCG. These results suggest that the non‐polyphenolic fraction of green tea leaves has potent antioxidative activity and that this activity is associated with pheophytins a and b. © 2000 Society of Chemical Industry     

Performance Evaluation of Magnetostrictive Small Wind Turbines Using Fe–Co Alloy–Based Clad Sheets

In this study, the Fe–Co alloy is combined with cobalt ferrite (CoFe₂O₄) and nickel (Ni) to form Fe–Co/CoFe₂O₄ and Fe–Co/Ni clad sheets and their energy-harvesting performance is evaluated. The Fe–Co/CoFe₂O₄ clad sheet exhibits an output voltage of 4.229 mV and an output power of 6.89 nW at a wind speed of 10 m s⁻¹. The energy-harvesting performance of both these clad sheets cannot be quantitatively compared owing to their different thicknesses, which result in varying volume and distance from the neutral plane. Nevertheless, the values of output voltage and power for Fe–Co/CoFe₂O₄ are higher than those for Fe–Co/Ni (2.107 mV and 0.294 nW).