Incorporation of Alpha‐Linolenic Acid and Enhancement of n‐3 Fatty Acids in Nile Tilapia: a Factorial Design

A 2² factorial design (two factors at two levels, in triplicate) was performed to investigate the influence of factors A (time of treatment, 15 and 30 days) and B (chia oil content in a supplemented diet, at 2.1 and 4.2 %) in three responses of interest referring to: (a) the incorporation of alpha‐linolenic acid (LNA) in lipids of Nile tilapia fillet; (b) the enhancement of n‐3 fatty acids; and (c) the decrease in the omega‐6/omega3 (n‐6/n‐3) ratio in fish. Factors A and B were significant in the three regression models obtained and the interaction AB was a significant contributor to the LNA and n‐6/n‐3 ratio. Analysis of variance suggested three significant and predictive mathematical models. Response surfaces analyses from designs indicated higher LNA and n‐3 contents and a lower n‐6/n‐3 ratio using both factors A and B in the higher levels (30 days of treatment and 4.2 % of chia oil in the diet for fish) chosen for this study.     

Quantitative analysis of α-mangostin in hydrophilic ointment using near-infrared spectroscopy

The objective of this research was to quantify the α-mangostin content in mangosteen pericarp (MP) ointment as a colloidal dispersion using near-infrared (NIR) spectroscopy. Various concentrations of MP (IP and EP) ointments containing both internal and external pericarps were prepared and the NIR spectra of these ointments were measured. The NIR spectrum of each ointment was correlated with α-mangostin concentration by partial least square (PLS) regression. Validation of the models was performed and their predictive ability was also investigated. The equation and R² value for the prediction of α-mangostin concentration in IP ointment were y?=?0.9843x?+?0.4441 and 0.9730 and those in EP ointment were y?=?0.9569x?+?0.1142 and 0.9136, respectively. The biases of the IP and EP ointment models were 0.23 and 0.00, respectively. The results showed that NIR could be a useful tool for the quality control of herbal medicine in hydrophilic ointment without any sample preparation. It could predict α-mangostin content in hydrophilic ointment at very low concentration with sufficient accuracy.     

Synthesis and gas sensing properties of SnO<Subscript>2</Subscript> nanoparticles with different morphologies

The SnO₂ particles with different morphologies of nanorod, nanosheet, nanoparticle and nanodot were synthesized by liquid-phase methods. In addition, Pt was loaded on each prepared SnO₂ by dispersing SnO₂ particles into PtCl₄ ^2? aqueous solutions containing 0.67 vol% methanol, followed by UV light irradiation for 6 h. The products were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and Brunauer–Emmett–Teller measurement. The gas sensing properties of the synthesized SnO₂ were tested by detecting the change in electric resistivity in flowing aceton and methanol gases with nitrogen base. The gas sensing properties greatly changed depending on not only the specific surface area, but also the exposed crystal plane, i.e., the SnO₂ nanorods exposing (111) planes showed the excellent sensitivity and quick response ability, indicating the excellent gas sensing ability of the (111) plane. Furthermore, the Pt loading exceedingly enhanced the gas sensing properties.     

Mechanical role of reinforcement in seismic behavior of steel-strip reinforced earth wall

In the current design practices of steel-strip reinforced earth walls (SSREWs), the length of the reinforcing material is determined based on the equilibrium between the reinforcement tension and the earth pressure acting on the wall. Here, the resistance of the reinforcing material laid in the active failure zone (AFZ) is not considered. Moreover, the mechanical role of the reinforcing material against the integrity of the SSREW has not been sufficiently verified. Regarding the seismic stability of SSREW, although it is investigated by treating the entire reinforced earth wall as a rigid body, this inspection method is for gravity-retaining walls, and the difference in the seismic behavior between the SSREW and the rigid body is not clear. In this study, therefore, dynamic centrifuge model tests on 6 types of SSREWs were conducted to clarify the following items: (1) the basic earthquake behavior of a SSREW, (2) the mechanical role of the reinforcing material laid in the AFZ and (3) the mechanical role of the reinforcing material against the integrity of the SSREW. The results indicated that the reinforcing material laid in the AFZ can restrain the amount of deformation of the wall during earthquakes. Furthermore, the more stable the AFZ is, the smaller the maximum wall displacement will be.     

Improvement in impact strength of modified cardanol‐bonded cellulose thermoplastic resin by using olefin resins

Impact strength of a modified cardanol‐bonded cellulose thermoplastic resin was greatly improved by using a small amount of olefin resins. As we showed, this thermoplastic resin (3‐pentadecylphenoxy acetic acid (PAA)‐bonded cellulose diacetate (CDA): PAA‐bonded CDA) exhibited high practical properties such as bending strength, heat resistance, and water resistance. However, its impact strength was insufficient for use in durable products. We improved the impact strength of PAA‐bonded CDA by adding hydrophobic olefin resins, such as polyethylene or polypropylene, while maintaining good bending strength and breaking strain. Furthermore, the application of olefin resins also increased water resistance and fluidity. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39829.     

Improvement in impact strength of modified cardanol‐bonded cellulose thermoplastic resin by adding modified silicones

The impact strength of cellulose diacetate (CDA) bonded with a modified cardanol (3‐pentadecylphenoxy acetic acid: PAA) was greatly improved up to 9 kJ/m² by adding a relatively small amount of modified silicones while suppressing a decrease in bending strength. In our recent research, this thermoplastic resin (PAA‐bonded CDA) exhibited high rigidity, glass transition temperature, and water resistance. However, its impact strength was insufficient for use in durable products. Therefore, silicones modified with polyether, amino, and epoxy groups were investigated as possible ways to improve the impact strength. The results show that adding polyether‐modified silicone (polyether silicone) with moderate polarity relative to PAA‐bonded CDA resulted in shearing deformation greatly enhances its impact strength while maintaining other properties, including glass transition temperature (T_g), water resistance, and thermoplasticity. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40366.     

Dynamic Changes in Reactive Oxygen Species in the Shoot Apex Contribute to Stem Cell Death in Arabidopsis thaliana

In monocarpic plants, stem cells are fated to die. However, the potential mechanism of stem cell death has remained elusive. Here, we reveal that the levels of two forms of reactive oxygen species (ROS), superoxide anion free radical (O2·−) and hydrogen peroxide (H₂O₂), show dynamic changes in the shoot apex during the plant life cycle of Arabidopsis thaliana. We found that the level of O2·− decreased and disappeared at four weeks after bolting (WAB), while H₂O₂ appeared at 3 WAB and showed a burst at 5 WAB. The timing of dynamic changes in O2·− and H₂O₂ was delayed for approximately three weeks in clv3-2, which has a longer lifespan. Moreover, exogenous application of H₂O₂ inhibited the expression of the stem cell determinant WUSCHEL (WUS) and promoted the expression of the developmentally programmed cell death (dPCD) marker gene ORESARA 1 (ORE1). These results indicate that H₂O₂ triggers an important signal inducing dPCD in stem cells. Given that O2·− plays roles in maintaining WUS expression and stem cell activity, we speculate that the dynamic shift from O2·− to H₂O₂ in the shoot apex results in stem cell death. Our findings provide novel insights for understanding ROS-mediated regulation during plant stem cell death.     

Development of a new heterojunction structure (ACJ -HIT) and its application to polycrystalline silicon solar cells

A new solar cell structure named HIT (Heterojunction with Intrinsic Thin layer) has been developed based on new artificially constructed junction (ACJ) technology. In this structure a non-doped a-Si thin layer was inserted between the p(a-Si)/n(c-Si) heterojunction, improving the output characteristics and achieving a conversion efficiency of 18.1%. This structure was applied to cast polycrystalline silicon solar cells of a practical size. A high conversion efficeincy of 13.6% was obtained with a cell size of 10 cm × 10 cm using various technologies, including hydrogen plasma passivation.     

GPC Profile Change of Potato Starch with Extrusion Processing

Native potato starch (moisture content 15%) was treated by twin screw extruder under four operating conditions with varying barrel temperatures (110°C–230°C). These modified starch samples were compared to native and drum-dried starch. Starch sample solution for gel chromatography was prepared by the three methods (acidic, alkaline, and neutral methods). They were subjected to gel chromatography on Toyopearl HW-75, and some difference was found among the three gel chromatographic patterns obtained from the same starch solution. This discrepancy among GPC patterns suggests formation of some types of anhydro-bonds between chains of amylopectin and or amylose in the extrusion process. Elevating barrel temperature increases degree of depolymerization. The size of fragments formed with the treatment is bigger than that of oligosaccharides but smaller than that of amylose.     

Vitamin E reduces cholesterol esterification and uptake of acetylated low density lipoprotein in macrophages

The effects of vitamin E on cholesteryl ester (CE) metabolism in 1774 cells were examined. Pretreatment of 1774 cells with vitamin E at concentrations above 50 μM significantly decreased acetylated low density lipoprotein (LDL)-induced incorporation of [¹⁴C]oleate into CF in cells in a dose-dependent manner. This was partly due to vitamin E Also significantly inhibiting the uptake of [³H]CE-labeled acetylated LDL by 1774 cells. A trend existed toward suppression of acyl-CoA:cholesterol acyltransferase (ACAT) activity in the cell lysate at high vitamin E concentration, but there was no effect on hydrolysis of CE. These data indicate that vitamin E reduces the uptake of modified LDL and suppresses ACAT activity, resulting in less cholesterol esterification in macrophages; a novel mechanism underlying the antiatherogenic properties of vitamin E.