Electrical properties of Zn+-doped (AlGa)As prepared by molecular beam epitaxy and its use in shallow junction solar cells

In conventional molecular beam epitaxy the p-type dopant zinc cannot be incorporated into GaAs because of its high vapour pressure. In the present work, zinc atoms were ionized to increase the sticking coefficient and zinc-doped p-type (AlGa)As was prepared by molecular beam epitaxy for the first time. The p-type layer with hole concentrations of $\text{10}{}^{16}\text{?10}{}^{19}\text{cm}{}^{\mathrm{?3}}$ is readily produced by this technique. Measurements of the Hall effect, the impurity distribution profile and the photoluminescence showed that Zn⁺-doped GaAs and (AlGa)As layers have a good quality comparable with that of layers doped with other impurities such as magnesium and beryllium. The epitaxial p-GaAs thin films were used to prepare shallow junction solar cells. The electrical characteristics showed a reduction of the surface recombination effect, and an energy conversion efficiency of up to 12.6% was obtained.     

Properties of nanocrystalline SiC:Ge:H alloy deposited by hot-wire chemical vapor deposition using Organosilane and Organogermane

Nanocrystalline hydrogenated silicon carbide: germanium alloy (nc-SiC:Ge:H) films have been deposited by hot-wire chemical vapor deposition at a low substrate temperature of about 300 °C. Germanium incorporation into the films and film structure based on cubic silicon carbide were confirmed by X-ray photoelectron spectroscopy and X-ray diffraction. Optical absorption spectra of the films with a germanium mole fraction of about 2% shifted to lower energies by about 0.2 eV compared with that of nanocrystalline cubic silicon carbide films.     

Preparation of various DLC films by T-shaped filtered arc deposition and the effect of heat treatment on film properties

Different types of diamond-like carbon (DLC) films (ta-C, a-C, ta-C:H and a-C:H) were prepared on super hard alloy (WC-Co) substrate using a T-shape filtered arc deposition (T-FAD) system. At first, the film properties, such as structure, hydrogen content, density, hardness, elastic modulus, were measured. Ta-C prepared with a DC bias of −100 V showed the highest density (3.1 g/cm³) and hardness (70-80 GPa), and the lowest hydrogen content (less than 0.1 at. %). It was found that the hardness of the DLC film is proportional to approximately the third power of film density. The DLC films were then heated for 60 min in an electric furnace at 550 °C in N₂. Only the ta-C film hardly change its structure, although other films were graphitized. The 200-nm thick ta-C film was then heated for 60 min through the temperature range from 400 to 800 °C in N₂ with 2 vol.% of O₂ and the film structure found to be stable up to 700 °C. The substrate was oxidized at 800 °C, indicating the ta-C film had a thermal barrier function up to that temperature.     

Removal of COD and color from livestock wastewater by the Fenton method

The Fenton method was applied to the removal of chemical oxygen demand using chromate (CODcr) and color from high-strength livestock wastewater in which the initial CODcr was 5000-5700 mg/L. The optimum ratio of H2O2 (mg/L) to the initial CODcr was 1.05 and the optimum molar ratio of H2O2/Fe2+ was 2. The optimum initial pH and the optimum reaction time were 3.5-4 and 30 min, respectively. Under optimal conditions, the removal ratios of CODcr and color of the supernatant after static precipitation of the produced sludge were 88 and 95.4%, respectively. Addition of Fenton's reagents in several aliquots did not affect the efficiencies of CODcr and color removal.     

Oxide-encapsulated vertical germanium nanowire structures and their DC transport properties

We demonstrate the p-type doping of Ge nanowires (NWs) and p-n junction arrays in a scalable vertically aligned structure with all processing performed below 400?°C. These structures are advantageous for the large scale production of parallel arrays of devices for nanoelectronics and sensing applications. Efficient methods for the oxide encapsulation, chemical mechanical polishing and cleaning of vertical Ge NWs embedded in silicon dioxide are reported. Approaches for avoiding the selective oxidation and dissolution of Ge NWs in aqueous solutions during chemical mechanical polishing and cleaning of oxide-encapsulated Ge NWs are emphasized. NWs were doped through the epitaxial deposition of a B-doped shell and transport measurements indicate doping concentrations on the order of 10(19)?cm(-3).     

Removal of o-xylene using biofilter inoculated with Rhodococcus sp. BTO62

Rhodococcus sp. BTO62 was isolated from activated sludge from a wastewater treatment plant as an o-xylene-degrading microorganism. BOT62 degraded not only o-xylene, but also benzene, toluene, ethylbenzene, m- and p-xylenes and styrene (BTEXS). A laboratory scale biofilter packed with Biosol as packing material, which is made from foamed waste glass mixed with corrugated cardboard, was inoculated with strain BTO62 and operated to remove relatively high loading of o-xylene at different space velocities under non-sterile and sterile conditions. The o-xylene elimination capacity to maintain more than 90% removal efficiency was 41g/m3/h under sterile condition, but it enhanced to 160g/m3/h under non-sterile condition. This indicates possibilities of the role of other contaminants for degradation of o-xylene and the degradation of intermediate products of o-xylene by contaminants. Quick recovery of o-xylene degradation was observed after shutdown of o-xylene gas supply and mineral medium circulation for 10-30 days.     

Site-selective blocking of PCR by a caged nucleotide leading to direct creation of desired sticky ends in the products

In order to terminate the polymerase reaction at a desired position, a caged thymine derivative--4-O-[2-(2-nitrophenyl)propyl]thymine--was incorporated into PCR primers. In the PCR cycles, the elongation of the nascent strand (5'-->3' direction) by polymerase was site-selectively terminated at the 3'-side of T(NPP). Accordingly, predetermined protruding ends were obtained after the removal of the protecting group by short UVA irradiation. Recombinant vectors coding the GFP gene were successfully prepared by direct ligation of these light-assisted cohesive-ending PCR (LACE-PCR) products with scission fragments obtained by use either of restriction enzymes or of artificial restriction DNA cutters and were used for transformation of E. coli.     

Reduction of lipophilicity at the lipophilic domain of RXR agonists enables production of subtype preference: RXRalpha-preferential agonist possessing a sulfonamide moiety

Retinoid X receptor agonists (RXR agonists, rexinoids) are interesting candidates for the treatment of cancers such as tamoxifen-resistant breast cancer and taxol-resistant lung cancer. However, well-known RXR agonists possess a strong lipophilic character. In addition, although RXR has three subtypes, no subtype-selective RXR agonists are known. Thus we aimed to produce less-lipophilic and subtype-selective RXR agonists. By designing sulfonamide-type RXR agonists, 4-[N-methanesulfonyl-N-(5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-2-naphthyl)amino]benzoic acid (8 a) was found to prefer RXRalpha over RXRbeta and RXRgamma, although the potency is less than the potencies of well-known RXR pan-agonists. Moreover, our results suggest that the reduction of lipophilicity at the hydrophobic interaction region of RXR agonists enables production of RXR subtype preference. Our finding will be useful for the creation of more potent and less-lipophilic subtype-selective RXR agonists aimed at the reduction of undesirable side effects.     

Reversible and hierarchical composite gels with CdSe nanocrystals

To synthesize composite solid materials of metal salt and CdSe nanocrystals by a simple one-step method has been described. These solids can form stable gel in some organic solvent, such as benzene, cyclohexane and 1-butanol, especial in n-decane even below 0.1 wt/vol.%. Furthermore, these gels appear strong fluorescence which can be easily adjusted by the gel concentration. Temperature-dependent fluorescence spectra of composite gels suggested that the CdSe NCs aggregate together in gel state which would induce the energy transfer between nanocrystals and these aggregates could be reversibly disintegrated when gel was heated to form sol. TEM observations provided the further evidence of the energy transfer and suggested that the CdSe NCs were enchased regularly not only on the surface of self assembly of metal salt, but also embedded inside of self assembly in composite gel with small size nanocrystals. In contrast, in composite organogel with large nanocrystals they were only enchased on the edge of self assembly.     

Terahertz MMICs and Antenna-in-Package Technology at 300 GHz for KIOSK Download System

Toward the realization of ultra-fast wireless communications systems, the inherent broad bandwidth of the terahertz (THz) band is attracting attention, especially for short-range instant download applications. In this paper, we present our recent progress on InP-based THz MMICs and packaging techniques based on low-temperature co-fibered ceramic (LTCC) technology. The transmitter MMICs are based on 80-nm InP-based high electron mobility transistors (HEMTs). Using the transmitter packaged in an E-plane split-block waveguide and compact lens receiver packaged in LTCC multilayered substrates, we tested wireless data transmission up to 27 Gbps with the simple amplitude key shifting (ASK) modulation scheme. We also present several THz antenna-in-packaging solutions based on substrate integrated waveguide (SIW) technology. A vertical hollow (VH) SIW was applied to a compact medium-gain SIW antenna and low-loss interconnection integrated in LTCC multi-layer substrates. The size of the LTCC antennas with 15-dBi gain is less than 0.1 cm³. For feeding the antenna, we investigated an LTCC-integrated transition and polyimide transition to LTCC VH SIWs. These transitions exhibit around 1-dB estimated loss at 300 GHz and more than 35 GHz bandwidth with 10-dB return loss. The proposed package solutions make antennas and interconnections easy to integrate in a compact LTCC package with an MMIC chip for practical applications.