Application of K2CO3 catalysts in the coal gasification process using nuclear heat

Conventional gasification processes use coal not only as feedstock to be gasified but also for supply of energy for reaction heat, steam production, and other purposes. With a nuclear high temperature reactor (HTR) as a source for process heat, it is possible to transform the whole of the coal feed into gas. This concept offers advantages over existing gasification processes: saving of coal, as more gas can be produced from coal; less emission of pollutants, as the HTR is used for the production of steam and electricity instead of a coal-fired boiler; and a lower production cost for the gas. However, the process has the disadvantage that the temperature is limited to the outlet temperature (950 °C max) of the helium cooling gas of the HTR. Therefore the possibility of catalytic steam gasification was examined. Model calculations based on experimental results show that use of 3–4 wt% relative to coal of K²CO³ catalyst increases the throughput of a large scale nuclear gasification plant by ≈65%, while gas production costs decrease by ≈15%. Corrosion by catalysts is not significant at low concentration (< 5 wt%) and low temperature (< 900 °C).     

Nuclear specific heat of thallium

We have measured the nuclear specific heat of a 0.79 mole thallium sample of 5 N+ purity in the temperature range 70 µKT20 mK and in magnetic fields from 20 mTB228 mT. The experimental results agree with the theoretical expectation for the specific heat of a nuclear paramagnet with the properties of Tl. Our results for the nuclear specific heat imply that the static properties of bulk Tl seem to differ from the dynamic, surface-sensitive properties of Tl samples investigated in former nuclear magnetic resonance experiments.     

Korrosion von ölgefeuerten Zentralheizungskesseln

Corrosion of oil-fired domestic boilers Depending on the surface temperature of the flue gas side the corrosion of oil fired domestic boilers proceeds either mainly by acid corrosion or by oxygen corrosion:

• – At surface temperatures of 60°C and higher the corrosion mechanism of acid corrosion prevails and the corrosion rates amount to 0.1–0.3 mm/year (values referred to continuous burner operation). The corrosion products consist of soluble iron(II)- and iron(III)sulfates. Higher corrosion rates can be attributed to an appreciable catalytic formation of sulfur trioxide on the corrosion products formed on the convective heating surfaces.
• – At surface temperatures of 40°C the mechanism of oxygen corrosion already dominates and the corrosion rates are about ten times higher (1.5–3 mm/year, referred to continous burner operation). The high portion of ioron oxide hydrates, especially goethit (α-FeOOH), makes the corrosion products difficult to remove.
• – Distinctly reduced service lives are also expected for the so called reduced temperature boilers (“Niedertemperaturkessel”) and low temperature boiers (“Tieftemperaturkessel”): According to the manufacturers these boilers may be operated at boiler water temperatures well below 60°C, as they are equipped with constructive measures to enhance the surface temperature on the flue gas side. However, these measures are only fully effective under stationary conditions.

Some of the results were obtained from weight loss measurements on test specimen made from St 35.8 and gray cast iron, that were exposed to the flue gases of an oil fired experimental boiler. Other important results come from field measurements of the sulfuric acid content of about 30 boilers that are in practical use.     

Effect of substrate surface roughness on the adherence of NiCrAlY thermal spray coatings

The adherence of plasma sprayed NiCrAlY bond coats can be improved by an appropriate substrate surface finish. The interface fracture energy for crack propagation along the coating/substrate interface has been measured for different surface roughness by means of a specially designed four-point bending test. An increase of the interface fracture energy of about 15% was observed for a three times higher surface roughness. In addition, four-point bending tests with the coating on the side face of bending specimens were performed to analyze the fracture and spalling behavior of the coatings both under large tensile and compressive substrate deformations.     

In-focus electron microscopy of frozen-hydrated biological samples with a Boersch phase plate

We report the implementation of an electrostatic Einzel lens (Boersch) phase plate in a prototype transmission electron microscope dedicated to aberration-corrected cryo-EM. The combination of phase plate, C_s corrector and Diffraction Magnification Unit (DMU) as a new electron-optical element ensures minimal information loss due to obstruction by the phase plate and enables in-focus phase contrast imaging of large macromolecular assemblies. As no defocussing is necessary and the spherical aberration is corrected, maximal, non-oscillating phase contrast transfer can be achieved up to the information limit of the instrument. A microchip produced by a scalable micro-fabrication process has 10 phase plates, which are positioned in a conjugate, magnified diffraction plane generated by the DMU. Phase plates remained fully functional for weeks or months. The large distance between phase plate and the cryo sample permits the use of an effective anti-contaminator, resulting in ice contamination rates of <0.6 nm/h at the specimen. Maximal in-focus phase contrast was obtained by applying voltages between 80 and 700 mV to the phase plate electrode. The phase plate allows for in-focus imaging of biological objects with a signal-to-noise of 5-10 at a resolution of 2-3 nm, as demonstrated for frozen-hydrated virus particles and purple membrane at liquid-nitrogen temperature.     

Topology optimization of a cantilevered piezoelectric energy harvester using stress norm constraints

Vibrational piezoelectric energy harvesters are devices which convert ambient vibrational energy into electric energy. Here we focus on the common cantilever type in which an elastic beam is sandwiched between two piezoelectric plates. In order to maximize the electric power for a given sinusoidal vibrational excitation, we perform topology optimization of the elastic beam and tip mass by means of the SIMP approach, leaving the piezoelectric plates solid. We are interested in the first and especially second resonance mode. Homogenizing the piezoelectric strain distribution is a common indirect approach increasing the electric performance. The large design space of the topology optimization approach and the linear physical model also allows the maximization of electric performance by maximizing peak bending, resulting in practically infeasible designs. To avoid such problems, we formulate dynamic piezoelectric stress constraints. The obtained result is based on a mechanism which differs significantly from the common designs reported in literature.     

A knowledge-based approach to manage information systems interoperability

Interoperability is a key property of enterprise applications, which is hard to achieve due to the large number of interoperating components and semantic heterogeneity. The inherent complexity of interoperability problems implies that there exists no silver bullet to solve them. Rather, the knowledge about how to solve wicked interoperability problems is hidden in the application cases that expose those problems. The paper addresses the question of how to organise and use method knowledge to resolve interoperability problems. We propose the structure of a knowledge-based system that can deliver situation-specific solutions, called method chunks. Situational Method Engineering promotes modularisation and formalisation of method knowledge in the form of reusable method chunks, which can be combined to compose a situation-specific method. The method chunks are stored in a method chunk repository. In order to cater for management and retrieval, we introduce an Interoperability Classification Framework, which is used to classify and tag method chunks and to assess the project situation in which they are to be used. The classification framework incorporates technical as well as business and organisational aspects of interoperability. This is an important feature as interoperability problems typically are multifaceted spanning multiple aspects. We have applied the approach to analyse an industry case from the insurance sector to identify and classify a set of method chunks.     

Immunoglobulin 1 (IgG1) Fc-glycosylation profiling of anti-citrullinated peptide antibodies from human serum

In several autoimmune disorders, including rheumatoid arthritis (RA), autoantibodies are thought to be the driving force of pathogenicity. Glycosylation of the Fc-part of human Igs is known to modulate biological activity. Hitherto, glycosylation of human IgG-Fc has been analyzed predominantly at the level of total serum IgG, revealing reduced galactosylation in RA. Given the pathogenic relevance of autoantibodies in RA, we wished, in the present study, to address the question whether distinct Fc-glycosylation features are observable at the level of antigen-specific IgG subpopulations. For this purpose, we have developed a method for the microscale purification and Fc-glycosylation analysis of anti-citrullinated peptide antibodies (ACPA). ACPA represent a group of autoantibodies that occur with unique specificity in RA patients. Their presence is associated with increased inflammatory disease activity and rapid joint destruction. Results indicate that ACPA of the IgG1 subclass vary considerably from total serum IgG1 with respect to Fc-galactosylation, with galactosylation being higher on ACPA than on serum IgG1 for some patients, while other patients show higher galactosylation on serum IgG1 than on ACPA. Using this method, studies can be performed on the biological and clinical relevance of ACPA glycosylation within RA patient cohorts.     

Effect of a physical phase plate on contrast transfer in an aberration-corrected transmission electron microscope

In this theoretical study we analyze contrast transfer of weak-phase objects in a transmission electron microscope, which is equipped with an aberration corrector (C(s)-corrector) in the imaging lens system and a physical phase plate in the back focal plane of the objective lens. For a phase shift of pi/2 between scattered and unscattered electrons induced by a physical phase plate, the sine-type phase contrast transfer function is converted into a cosine-type function. Optimal imaging conditions could theoretically be achieved if the phase shifts caused by the objective lens defocus and lens aberrations would be equal to zero. In reality this situation is difficult to realize because of residual aberrations and varying, non-zero local defocus values, which in general result from an uneven sample surface topography. We explore the conditions--i.e. range of C(s)-values and defocus--for most favourable contrast transfer as a function of the information limit, which is only limited by the effect of partial coherence of the electron wave in C(s)-corrected transmission electron microscopes. Under high-resolution operation conditions we find that a physical phase plate improves strongly low- and medium-resolution object contrast, while improving tolerance to defocus and C(s)-variations, compared to a microscope without a phase plate.