Permittivity and Conductivity Measurements of Building Materials at 5.8 GHz and 41.5 GHz

The results of various experiments performed to characterize electromagnetic properties of typical building materials at BRAN (Broadband Radio Access Networks) and MVDS (Multipoint Video Distribution System) bands are presented and compared. Transmission and reflection coefficients were measured as functions of the angle of incidence, using a wideband sounder based on the swept frequency technique. A high precision angular positioning system was built and used in co-ordination with the measurement equipment.The dielectric constants (_r) were estimated by comparing values predicted with a multiple successive internal reflection model and measured transmission and reflection coefficients. It has been found that the variation of the dielectric constant value with the frequency does not necessarily follow the same trend for different materials. For example, the measured _r for plasterboard presents an increment withfrequency (2.02 at 5.8 GHz, 2.5 at 41.5 GHz – measured by theauthors –, 2.58 at 59.5 GHz, and 2.81 at 60.2 GHz – given byliterature –), while the values for glass follow a wanderingpattern (6.06 at 5.8 GHz, 5–10 at 10 GHz, 3.41 at 41.5 GHz, 7.51at 57.6 GHz, and 5.29 at 60.2 GHz). Moreover, the measured_r for a brick wall at 5.8 GHz (3.58) shows differenceswith values reported at 2 GHz (4.44).     

Automatic construction of multiple-object three-dimensional statistical shape models: application to cardiac modeling

A novel method is introduced for the generation of landmarks for three-dimensional (3-D) shapes and the construction of the corresponding 3-D statistical shape models. Automatic landmarking of a set of manual segmentations from a class of shapes is achieved by 1) construction of an atlas of the class, 2) automatic extraction of the landmarks from the atlas, and 3) subsequent propagation of these landmarks to each example shape via a volumetric nonrigid registration technique using multiresolution B-spline deformations. This approach presents some advantages over previously published methods: it can treat multiple-part structures and requires less restrictive assumptions on the structure's topology. In this paper, we address the problem of building a 3-D statistical shape model of the left and right ventricle of the heart from 3-D magnetic resonance images. The average accuracy in landmark propagation is shown to be below 2.2 mm. This application demonstrates the robustness and accuracy of the method in the presence of large shape variability and multiple objects.     

Embryonic fatty acid composition as a function of yolk fatty acid composition in eggs of the lesser spotted dogfish (Scyliorhinus canicula L.)

Yolk and embryonic total lipids were extracted from spotted dogfish eggs at two developmental stages. Total lipids were fractionated into neutral lipids (NL) and polar lipids (PL), and the fatty acid composition of each group was determined. Yolk lipid composition was found to be quantitatively different (NL/PL≊1) from embryo lipid composition (NL/PL≊0.5), for both stages of development. However, individual fatty acid composition did not differ from younger to older eggs for either yolk or embryo. There were significant differences (p<0.05) in major fatty acid groups from yolk and embryonic PL for saturated fatty acids, monounsaturated fatty acids (MUFA) and n−3 polyunsaturated fatty acids (PUFA) for younger eggs, and for MUFA and n−3 PUFA for older eggs. For NL, only MUFA composition from the oldest eggs showed differences between yolk and embryo. Results are discussed in terms of embryonic needs for highly unsaturated fatty acid (HUFA) biosynthesis, as well as to provide some explanations for the unusually high levels of 20∶4n−6 in both yolk and embryonic neutral lipids and polar lipids.     

Sine-Wave Signal Characterization Using Square-Wave and ΣΔ-Modulation: Application to Mixed-Signal BIST

This paper presents a method for extracting, in the digital domain, the main characteristic parameters of an analog sine-wave signal. It is based on a double-modulation, square-wave and sigma-delta, together with a simple Digital Processing Algorithm. It leads to an efficient and robust approach very suitable for BIST applications. In this line, some considerations for on-chip implementation are addressed together with simulation results that validate the feasibility of the proposed approach.Diego Vázquez was born in El Coronil, Sevilla, Spain, in 1966. He received the Licenciado en Física degree in 1989 and the Doctor en Ciencias Físicas degree in 1995, both from the University of Sevilla, Spain. Since 1990, he has been with the Departamento de Electrónica y Electromagnetismo, University of Sevilla, where he is a Associate Professor, and also with the Instituto de Microelectrónica de Sevilla, Centro Nacional de Microelectrónica (IMSE-CNM-CSIC), Sevilla, Spain. He has published about 100 papers in international journals, books and major conferences. In 1992 he won the Best Paper Award of the 10th IEEE VLSI Test Symposium. His research interests are in the fields of design, fault tolerance, test, and design for testability of analog and mixed-signal circuits.Gloria Huertas was born in Sevilla, Spain, in 1974. She received the Licenciado en Física degree in 1997 and the Ph.D. in 2004, both from the University of Sevilla, Spain. Since then, she has been with the Departamento de Electrónica y Electromagnetismo, University of Sevilla, where she is Assistant Professor, and also with the Instituto de Microelectrónica de Sevilla, Centro Nacional de Microelectrónica (IMSE-CNM-CSIC), Sevilla, Spain. Her research focuses on designing electronic mixed-signal circuits and systems including techniques for testability.África Luque was born in Zamora (Spain) in 1977. She received the Licenciado en Física degree in 2000 from the University of Sevilla, Sevilla, Spain. She is with the Departamento de Electrónica y Electromagnetismo, University of Sevilla, and also with the Instituto de Microelectrónica de Sevilla, Centro Nacional de Microelectrónica (IMSE-CNM-CSIC), Sevilla, Spain, where she is currently pursuing the Ph.D. degree. Her research focuses on the design and test of mixed-signal circuits including Silicon-On-Insulator technologies.Manuel J. Barragan was born in Sevilla, Spain, in 1980. He received the Licenciado en Física degree in 2003 from the University of Sevilla, Sevilla, Spain. He is currently pursuing the Ph.D. degree from the Instituto de Microelectrónica de Sevilla (IMSE, CNM) on the topics of test and design for testability of analog and mixed-signal circuits.Gildas Leger was born in St. Brieuc, Côtes dArmor, France, in 1976. He received the Ingénieur en Physique degree in 1999 from the National Institute of Applied Sciences (INSA) of Rennes, France.He is currently pursuing the Ph.D. degree from the Instituto de Microelectrónica de Sevilla (IMSE, CNM). His research focuses on designing electronic mixed-signal circuits and systems including techniques for testability, specially in the domain of analog to digital conversion.Adoración Rueda joined the Department of Electronics and Electromagnetism at the University of Seville in 1976 as Assistant Professor, and obtained the Ph.D. degree in 1982. From 1984 to 1996 she was Associate Professor in that Department, where now holds the position of Full Professor in Electronics. In 1989 she became researcher at the Department of Analog Design of the National Microelectronics Center (CNM), now Institute of Microelectronics at Seville (IMSE).She has participated in several research projects financed by the Spanish CICYT and by different programs of the European Community. She has published about 135 papers in international journals, books and major conferences. In 1992 she won the Best Paper Award of the 10th IEEE VLSI Test Symposium. Her research interests are currently focused on the topics of Design and Test of Analog and Mixed-signal Circuits, Behavioral Modeling of Mixed-signal Circuits, and development of CAD tools.Jose Luis Huertas received the Licenciado en Física degree nd the Doctor en Ciencias Físicas degrees in 1969 and 1973, respectively, both from the University of Sevilla, Spain.From 1970 to 1971, he was with the Philips International Institute, Eindhoven, The Netherlands, as a postgraduate student. Since 1971, he has been with the Departamento de Electrónica y Electromagnetismo, University of Sevilla, Spain, where he is a Full Professor. He is also the Director of the Instituto de Microelectrónica de Sevilla, Centro Nacional de Microelectrónica de Sevilla, Seville, Spain. His current interests include the design and testing of analog/digital integrated circuits, computer-aided IC analysis and design, fuzzy logic, nonlinear microelectronics, and neural networks.     

Multicast deflector

Technological evolution is leading telecommunications toward all-IP scenarios, where multiple services are transported as IP packets. Among these services is the broadcast of video. A possible mechanism for broadcasting multiple video channels over IP is to use IP multicast, and let each client decide about the reception of a channel. The secure IP multicast specified by the IETF MSEC working group is a candidate solution for securing these broadcast services. In this paper we propose a new solution for supporting the broadcast of multiple video channels which can be accessed only by authorized users; besides, when a video channel is not visualized in the last mile its transmission is temporarily suspended, so that the cable can be used for other services such as standard Internet access.     

Photovoltaic module reliability model based on field degradation studies

Crystalline silicon photovoltaic (PV) modules are often stated as being the most reliable element in PV systems. This presumable high reliability is reflected by their long power warranty periods. In agreement with these long warranty times, PV modules have a very low total number of returns, the exceptions usually being the result of catastrophic failures. Up to now, failures resulting from degradation are not typically taken into consideration because of the difficulties in measuring the power of an individual module in a system. However, lasting recent years PV systems are changing from small isolated systems to large grid‐connected power stations. In this new scenario, customers will become more sensitive to power losses and the need for a reliability model based on degradation may become of utmost importance. In this paper, a PV module reliability model based on degradation studies is presented. The main analytical functions of reliability engineering are evaluated using this model and applied to a practical case, based on state‐of‐the‐art parameters of crystalline silicon PV technology. Relevant and defensible power warranties and other reliability data are obtained with this model based on measured degradation rates and time‐dependent power variability. In the derivation of the model some assumptions are made about the future behaviour of the products—i.e. linear degradation rates—although the approach can be used for other assumed functional profiles as well. The method documented in this paper explicitly shows manufacturers how to make reasonable and sensible warranty projections. Copyright © 2008 John Wiley & Sons, Ltd.     

Crystal Size,Morphology, and Growth Mechanism in Bio‐Inspired Apatite Nanocrystals

Bio‐inspired apatite nanoparticles precipitated in the presence of citrate ions at increasing maturation times are characterized in terms of structure, size, morphology, and composition through advanced X‐ray total scattering techniques. The origin of the platy crystal morphology, breaking the hexagonal symmetry, and the role of citrate ions is explored. By cross‐coupling the size and shape information of crystal domains with those obtained by atomic force microscopy on multidomain nanoparticles, a plausible mechanism underlying the amorphous‐to‐crystal transformation is reconstructed. In the present study, citrate plays the distinct roles of inducing the platy morphology of the amorphous precursor and controlling the thickness of the Ca‐deficient apatite nanocrystals. These findings can open new scenarios also in bone mineralization, where citrate might have a broader role to play than has been thought to date.     

Practical Harmonic Cancellation Techniques for the On-Chip Implementation of Sinusoidal Signal Generators for Mixed-Signal BIST Applications

Harmonic cancellation strategies have been recently presented as a promising solution for the efficient on-chip implementation of accurate sinusoidal signal generators. Classical harmonic cancellation techniques consist in combining a set of time-shifted and scaled versions of a periodical signal in such a way that some of the harmonic components of the resulting signal are cancelled. This signal manipulation strategy can be easily implemented using digital resources to provide a set of phase-shifted digital square-wave signals and a summing network for scaling and combining the phase-shifted square-waves. A critical aspect in the practical implementation of the harmonic cancellation technique is the stringent accuracy required for the scaling weight ratios between the different phase-shifted signals. Small variations between these weights due to mismatch and process variations will reduce the effectiveness of the technique and increase the magnitude of undesired harmonic components. In this work, different harmonic cancellation strategies are presented and analyzed with the goal of simplifying the practical on-chip implementation of the scaling weights. Statistical behavioral simulations are provided in order to demonstrate the feasibility of the proposed approach.     

Mapping of Discrete Cosine Transforms onto Distributed Hardware Architectures

We present an algorithmically-aware, high-level partitioning methodology for discrete cosine transforms (DCT) targeted to distributed hardware architectures. The methodology relies on the exploration of alternate DCT formulations as part of the partition optimization process. To the best of our knowledge, no previously proposed DCT algorithm exists that is capable of consistently producing alternate regular formulations for an n-size DCT. Hence, a new Cooley-Tukey-like DCT factorization algorithm was developed to allow exploration of alternate formulations as part of the partitioning optimization process. The use of our factorization mechanism along with a greedy strategy to explore the space of equivalent DCT formulations yielded partitioning solutions with as much as 18% reduction in latency and 83% reduction in run-time as compared to previously proposed regular DCT formulations.

Analog circuits optimization based on evolutionary computation techniques

This paper presents a new design automation tool, based on a modified genetic algorithm kernel, in order to improve efficiency on the analog IC design cycle. The proposed approach combines a robust optimization with corner analysis, machine learning techniques and distributed processing capability able to deal with multi-objective and constrained optimization problems. The resulting optimization tool and the improvement in design productivity is demonstrated for the design of CMOS operational amplifiers.