氧化钨纳米颗粒和纳米线的选择合成及光致发光研究

采用无机盐辅助水热法选择调控合成了WO3纳米颗粒和纳米线.通过SEM,TEM,EDX和XRD等手段对产物进行了表征.研究了形貌和尺寸对WO3的光致发光性能的影响,并探讨了形貌和尺寸对WO3光致发光性能影响的机制.     

水下隧道穿越管道保护效果测试评价

本文通过对四川气田北干线涪江隧道穿越管道阴极保护电参数的现场测试，取得了实际可信的基础数据，验证了处于水下隧道洞内的穿越段管道，能得到陆上强制电流阴极保护系统的有效保护，保护电流所必经的岩石层和锚喷钢筋混凝土层对保护电流没有构成屏蔽的结论，对管道工程设计和运行管理具有指导作用。     

热处理对718塑料模具钢加工性能的影响

对718塑料模具钢经过不同工艺热处理后的加工性能进行了研究，分析了影响其加工性能的主要因素。采用TEM和Thermo-Calc软件对718塑料模具钢组织中的碳化物类型及其在钢中的溶解过程进行了试验研究和模拟计算，指出正火后高温回火对小截面该钢模块具有一定的实用性。     

Microstructures and properties of coating from cemented carbide by vacuum powder sintering

In this paper, the microstructures and properties of coating from cemented carbide of WC–Fe–Co–Ni on the substrate 45 steel are studied. The effects of sintering temperature on the microstructures of coating, the interface structures between coating and the substrate, the microhardness distribution and its wear resistance in the coating are investigated. The results indicate that the coating is strongly metallurgical bonded with the substrate by the mutual diffusion and penetration of Fe towards the coating and W, Co, Ni towards the substrate at sintering temperature ranging from 1280 °C to 1300 °C. The coating obtained exhibits compact structure and uniformly distribution of WC with fine grain and porosity free from defects, having high microhardness and preferable wear resistance.     

小截面送料双频电磁成形的试验研究

研究了金属熔体的小截面送料双频电磁成形过程。结果表明：屏蔽罩能够调节成形感应圈内的磁场分布，使成形感应圈内的熔体处于合理状态；两感应圈间必须保持一定距离，使预热感应圈的磁场不影响成形感应圈的磁场分布，利于成形稳定；在其他条件一定的情况下，有一适合的抽拉速度和电源功率匹配；并获得了表面质量良好的耐热不锈钢样件。     

回火过程应力场计算机模拟

回火过程应力场计算机模拟林家骝，杨振枢，于震宗，段贵明（清华大学）郭剑仁，史全兴，谢克仁（内蒙古第一机器厂）ＡＳｔｕｄｙｏｆＮｕｍｅｒｉｃａｌＳｉｍｕｌａｔｉｏｎｏｆＳｔｒｅｓｓＦｉｅｌｄｄｕｒｉｎｇＴｅｍｐｅｒｉｎｇ￥ＬｉｎＪｉａｌｉｕ；ＹａｎｇＺ...     

CCWELD:A CIM system for robotic arc welding

ＣＣＷＥＬＤ：ＡＣＩＭｓｙｓｔｅｍｆｏｒｒｏｂｏｔｉｃａｒｃｗｅｌｄｉｎｇ￥ＫＯＮＧＹｕ；ＤＡＩＭｉｎｇ；ＷＵＬｉｎａｎｄＨＵＡＮＧＤｏｎｇｓｈｅｎｇ（ＷｅｌｄｉｎｇＤｅｐａｒｔｍｅｎｔ，ＨａｒｂｉｎＩｎｓｔｉｔｕｅｏｆｔｅｃｈｎｏｌｏｇｙ，Ｈａｒｂ...     

煤焦油蒸馏的新产品-改质沥青的生产

论述了利用热缩聚方法对中温沥青进行改质处理来生产改质沥青 ,提高了沥青的软化点、β树脂含量及结焦值 ;并介绍了生产工艺的特点、主要工艺参数及产品的质量     

丙烯酸酯三元共聚物酸掺杂改性聚苯胺的研究

选择丙烯酸 (AA)、丙烯酸丁酯 (BA)和甲基丙烯酸甲酯 (MMA)三元共聚物对聚苯胺 (PAn)进行改性 ,研究了BA的用量和引发剂浓度对PAn导电率的影响 ,对样品进行DSC、FTIR和SEM测试。结果表明 ,丙烯酸酯三元共聚物酸对PAn有良好的掺杂改性作用 ,当共聚单体 (AA -BA -MMA)组成为 10∶45∶45 (质量比 ) ,引发剂浓度为0 0 5 48mol·L-1时 ,可制得电导率达 1 42 1S·cm-1的导电PAn。     

Preparation of high-strength and high-modulus poly(vinyl alcohol) fibers by crosslinking wet spinning/multistep drawing method

This study is mainly focused on the preparation of high-strength and high-modulus poly(vinyl alcohol) (PVA) fibers by crosslinking wet spinning and multistep drawing. High strength as well as high modulus can be achieved by introduction of the crosslinks into the oriented chains to reduce entanglement degree and slippage between chains. The relationships between mechanical properties and fine structure of the drawn fibers were examined based on results of measurements of tensile property, thermal property, dynamic viscoelasticity, crystallinity, and orientation. The strength and Young's modulus of the drawn fibers are approximated to 1.82 and 51.76 GPa, respectively. The fiber has a sharp melting peak temperature that appeared at 236.7°C in the differential scanning calorimeter (DSC) curve. Our results indicate the multistep drawing procedure is superior to the conventional one-step drawing procedure. These excellent mechanical properties can be directly attributed to their high orientation of the amorphous chains. © 1994 John Wiley & Sons, Inc.