Reduction of optical beat interference using gain-saturated RSOA in upstream WDM/SCM optical links

A new scheme for reducing optical beat interference (OBI) noise in optical network units is proposed for subcarrier multiplexing-based access network applications. The optical spectrum of the transmit lasers is broadened by using a radio frequency (RF) clipping tone with a modulation depth greater than one. This reduces the impact of the OBI noise. The distortions caused by an RF clipping tone are also suppressed by introducing a gain-saturated reflective optical amplifier, which shows the characteristics of high-pass filter. The proposed scheme has been verified by measuring the error vector magnitude of 16QAM signal with 20 Mbps. Error-free transmission has been achieved even when the light of OBI-noise-causing lasers is stronger than that of the signal laser by 7 dB     

Preparation and characterization of cuprous iodide nanoparticles

A new technique for the preparation of CuI nanoparticles from CuSO₄ and KI ethanol solutions has been developed. Preparation conditions were optimized through a series of experiments. Under these conditions, the yield of CuI reached 95.39%. The product was characterized and the reaction kinetics was studied. The results show that the product takes a roughly spherical shape with an average particle size of less then 50 nm. The activation energy of the formation of CuI is found to be E _a = 0.58 × 10² kJ/mol, and the preexponential factor in the Arrhenius equation is k ₀ = 7.43 × 10¹⁶ mol/(l s). The text was submitted by the authors in English.     

Optimised electromagnetic 3d field solver for frequencies below the first resonance

An optimised low-frequency solution algorithm is proposed that reduces the electromagnetic wave equation to a small number of scalar potential problems. The latter can be solved using black-box algebraic multigrid solvers. Within the framework of the finite integration technique, the reduction of the wave equation is accomplished by tree/cotree decompositions of primary and dual grids, which allow for highly efficient solutions of Ampere's and Faraday's equations. The example of a ferrite-loaded accelerator component demonstrates that the scheme is much more efficient than the direct approach using Krylov subspace solvers     

Netted radar sensitivity and ambiguity

The performance of netted radar is evaluated in terms of a netted version of the radar equation and the ambiguity function. A software simulation has been developed to allow assessment of netted radar sensitivity and ambiguity properties in both two-and three-dimensional space. Simulation results demonstrate that coherent netted radar sensitivity depends not only on the radar parameters, but also on the numbers, locations and specification of transmit and receive nodes. The netted radar ambiguity function is affected by a combination of many factors. In addition to those that determine the form of the monostatic ambiguity function, the locations of transmit and receive nodes as well as the position and velocity of the target all are shown to play an important role in evaluating system performance. As a result of these dependencies, it is shown that there is severe degradation of range and Doppler resolution when a target crosses sufficiently close to a transmit-receive baseline.     

Skew-cyclic codes

We generalize the notion of cyclic codes by using generator polynomials in (non commutative) skew polynomial rings. Since skew polynomial rings are left and right euclidean, the obtained codes share most properties of cyclic codes. Since there are much more skew-cyclic codes, this new class of codes allows to systematically search for codes with good properties. We give many examples of codes which improve the previously best known linear codes.     

The effect of solidification time and heat treatment on the fatigue properties of a cast 319 aluminum alloy

Solidification time and heat treatment are known to have a large effect on the microstructure of cast aluminum alloys. This study was conducted to quantify how the fatigue properties of a 319-type aluminum alloy are affected by solidification time and heat treatment. Both porosity-containing (non-hot isostatically pressed (HIP)) and porosity-free (HIP) samples in the T6 (“peak aged”) or T7 (“overaged”) heattreated conditions were tested. As the solidification time increased, the average initiating pore diameter increased and stress-controlled fatigue life decreased. Heat treatment was observed to have a large effect on fatigue properties of the HIP samples. However, in the non-HIP fatigue samples, heat treatment did not significantly change the fatigue life or fatigue strength of the cast 319-type alloy. The absence of an influence of heat treatment on fatigue response is attributed to the predominance of the microporosity in fatigue crack initiation in cast aluminum.     

Sandwich panels with Kagome lattice cores reinforced by carbon fibers

Stretching dominated Kagome lattices reinforced by carbon fibers were designed and manufactured. The sandwich panels were assembled with bonded laminate skins. The mechanical behaviors of the sandwich panels were tested by out-of-plane compression, in-plane compression and three-point bending. Different failure modes of the sandwich structures were revealed. The experimental results showed that the carbon fiber reinforced lattice grids are much stiffer and stronger than foams and honeycombs. It was found that buckling and debonding dominate the mechanical behavior of the sandwich structures, and that more complaint skin sheets might further improve the overall mechanical performance of the sandwich panels.     

Real-Time Three-Dimensional Occupancy Grid Modeling for the Detection and Tracking of Construction Resources

Awareness of the construction environment can be improved by automatic three-dimensional (3D) sensing and modeling of job sites in real time. Commercially available 3D modeling approaches based on range scanning techniques are capable of modeling static objects only, and thus cannot model dynamic objects in real time in an environment comprised of moving humans, equipment, and materials. Emerging prototype video range cameras offer an alternative by facilitating affordable, wide field of view, dynamic object tracking at frame rates better than 1?Hz (real time). This paper describes a methodology to model, detect, and track the position of static and moving objects in real time, based on data obtained from video range cameras. Experiments with this technology have produced results that indicate that video rate 3D data acquisition and analysis of construction environments can support effective modeling, detection, and tracking of project resources. This approach to job site awareness has inherent value and broad application. In combination with effective management practices and other sensing techniques, this technology has the potential to significantly improve safety on construction job sites.     

Deflection Calculation of FRP Reinforced Concrete Beams Based on Modifications to the Existing Branson Equation

Fundamental concepts of tension stiffening are used to explain why Branson’s equation for the effective moment of inertia Ie does not predict deflection well for fiber reinforced polymer (FRP) reinforced concrete beams. The tension stiffening component in Branson’s equation is shown to depend on the ratio of gross-to-cracked moment of inertia (Ig/Icr), and gives too much tension stiffening for beams with an Ig/Icr ratio greater than 3. FRP beams typically have an Ig/Icr ratio greater than 5, leading to a much stiffer response and underprediction of computed deflections as observed by others in the past. One common approach to computing deflection of FRP reinforced concrete beams has been to use a modified form of the Branson equation. This paper presents a rational development of appropriate modification factors needed to reduce the tension stiffening component in Branson’s original expression to realistic levels. Computed deflections using this approach give reasonable results with the right modification factor, and compare well with a more general unified approach that incorporates a realistic tension stiffening model. Comparison is made with the existing and past correction factors recommended by ACI 440 for predicting deflection of FRP beams. The method presently used by ACI 440 gives reasonable estimates of deflection for glass and carbon FRP reinforced beams. However, this method underestimates deflection of aramid FRP reinforced beams and is restricted to rectangular sections. A proposal is made for adoption of a simple modification factor that works well for all types of FRP bar and beam cross-sectional shape.