Characterization of the Polishing‐Induced Contamination of Fused Silica Optics

In this work, the polishing‐induced contamination layer at the fused silica optics surface was studied with various interface analysis techniques: Secondary Ion Mass Spectroscopy (SIMS), Electron Probe Microanalysis (EPMA), X‐Ray Photoelectron Spectroscopy (XPS), and Inductively Coupled Plasma—Optical Emission Spectroscopy (ICP‐OES). Samples were prepared using an MRF polishing machine and cerium‐based slurry. The cerium and iron penetration and concentration were measured in the surface out of defects. Cerium is embedded at the surface in a 60 nm layer and concentrated at 1200 ppmw in this layer while iron concentration falls down at 30 nm. Spatial distribution and homogeneity of the pollution were also studied in the scratches and bevel using SIMS and EPMA techniques. We saw evidence that surface defects, such as scratches, are specific places that hold the pollutants. This overconcentration is also observed in the chamfer. These new insights into the polishing‐induced contamination of fused silica optics and it repartition have been obtained using various characterization methods. Advantages and disadvantages of each one are discussed.     

Updated Correlation Between Aircraft Smoke Number and Black Carbon Concentration

Aircraft emissions of black carbon (BC) contribute to anthropogenic climate forcing and degrade air quality. The smoke number (SN) is the current regulatory measure of aircraft particulate matter emissions and quantifies exhaust plume visibility. Several correlations between SN and the exhaust mass concentration of BC (C _BC) have been developed, based on measurements relevant to older aircraft engines. These form the basis of the current standard method used to estimate aircraft BC emissions (First Order Approximation version 3 [FOA3]) for the purposes of environmental impact analyses. In this study, BC with a geometric mean diameter (GMD) of 20, 30, and 60 nm and filter diameters of 19 and 35 mm are used to investigate the effect of particle size and sampling variability on SN measurements. For BC with 20 and 30 nm GMD, corresponding to BC emitted by modern aircraft engines, a smaller SN results from a given C _BC than is the case for BC with 60 nm GMD, which is more typical of older engines. An updated correlation between C _BC and SN that accounts for typical size of BC emitted by modern aircraft is proposed. An uncertainty of ±25% accounts for variation in GMD in the range 20–30 nm and for the range of filter diameters. The SN–C _BC correlation currently used in FOA3 underestimates by a factor of 2.5–3 for SN ≤15, implying that current estimates of aircraft BC emissions derived from SN are underestimated by the same factor.

Copyright 2013 American Association for Aerosol Research     

Characterization of a Cyclic Nucleotide‐Activated K+ Channel and its Lipid Environment by Using Solid‐State NMR Spectroscopy

Voltage‐gated ion channels are large tetrameric multidomain membrane proteins that play crucial roles in various cellular transduction pathways. Because of their large size and domain‐related mobility, structural characterization has proved challenging. We analyzed high‐resolution solid‐state NMR data on different isotope‐labeled protein constructs of a bacterial cyclic nucleotide‐activated K⁺ channel (MlCNG) in lipid bilayers. We could identify the different subdomains of the 4×355 residue protein, such as the voltage‐sensing domain and the cyclic nucleotide binding domain. Comparison to ssNMR data obtained on isotope‐labeled cell membranes suggests a tight association of negatively charged lipids to the channel. We detected spectroscopic polymorphism that extends beyond the ligand binding site, and the corresponding protein segments have been associated with mutant channel types in eukaryotic systems. These findings illustrate the potential of ssNMR for structural investigations on large membrane‐embedded proteins, even in the presence of local disorder.     

Distribution of soap in a membrane reactor in the production of fame from waste cooking oil

A continuous‐flow membrane reactor was constructed for the production of fatty acid methyl ester (FAME) from waste vegetable oil with high free fatty acid (FFA) content. FAME was produced via base‐catalysed transesterification with methanol at two FFA levels: 4.8 and 10 mass%. The effect of the ceramic membrane pore size on the separation of soap and triglycerides from the FAME in the reactor was investigated. In all cases, the triglyceride was completely retained in the reactor, yielding free and total glycerine contents in the produced FAME significantly below the maximum limits of the ASTM D6751 standard. The soaps produced in the reaction mixture were not completely retained in the reactor and did not affect the FAME production process. © 2012 Canadian Society for Chemical Engineering     

Influence of very long aging on the relaxation behavior of flame‐retardant printed circuit board epoxy composites under mechatronic conditions

Very long aging times, up to 15,100 h (629 days) at 110°C, were achieved on flame‐retardant printed circuit board laminates commonly used in automotive design. This composite was fabricated from glass fibers embedded in an epoxy resin. Aging was performed in an oven under an air atmosphere at a temperature lower than the glass‐transition temperature. Temperature‐modulated differential scanning calorimetric analysis was used to investigate the influence of such aging on the glass‐transition phenomena. A new amorphous phase appeared during aging. By extending the analysis to samples collected at different thicknesses, we demonstrated the existence of a time‐dependent gradient of the properties. A skin–core structure was evidenced, and this slowed down oxidation and allowed physical aging to occur in the bulk sample. An exponential law described the variations of the glass‐transition of the new external compound. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 786‐792, 2013     

Dendritic Cells and Multiple Sclerosis: Disease,Tolerance and Therapy

Multiple sclerosis (MS) is a devastating neurological disease that predominantly affects young adults resulting in severe personal and economic impact. The majority of therapies for this disease were developed in, or are beneficial in experimental autoimmune encephalomyelitis (EAE), the animal model of MS. While known to target adaptive anti-CNS immune responses, they also target, the innate immune arm. This mini-review focuses on the role of dendritic cells (DCs), the professional antigen presenting cells of the innate immune system. The evidence for a role for DCs in the appropriate regulation of anti-CNS autoimmune responses and their role in MS disease susceptibility and possible therapeutic utility are discussed. Additionally, the current controversy regarding the evidence for the presence of functional DCs in the normal CNS is reviewed. Furthermore, the role of CNS DCs and potential routes of their intercourse between the CNS and cervical lymph nodes are considered. Finally, the future role that this nexus between the CNS and the cervical lymph nodes might play in site directed molecular and cellular therapy for MS is outlined.     

Fatty Acid Profile of Cardiac Muscle Phospholipid and Triacylglycerol in MDX Mice and C57BL/10ScSnJ Controls

The mdx mouse is a model for Duchenne muscular dystrophy (DMD), a debilitating disease affecting striated muscle. It is established that the fatty acid (FA) composition of skeletal muscle phospholipid (PL) is altered in mdx mice, but it is not known if cardiac muscle is similarly affected by dystrophin-deficiency. We tested FA profiles in PL and triacylglycerol (TAG) in cardiac muscle of 12-week old mdx and control (con) mice. Of 22 different FA, similar to our previous finding for skeletal muscle, the most abundant FA in heart PL were palmitic, stearic, cis-vaccenic, linoleic, and docosahexaenoic acid, while for TAG the most abundant FA were palmitic, oleic, cis-vaccenic, and linoleic acid. In comparing mdx and con, no significant group differences were detected for any FA in PL or TAG. Thus, unlike skeletal muscle, FA composition in cardiac muscle PL is not different between mdx and con at the age studied. The results can be understood in the context of tissue-specific disease severity in mdx mice, as pathology is quite modest in cardiac compared with skeletal muscle.     

In‐line monitoring of the injection molding process by dielectric spectroscopy

In recent years, electrical techniques like microdielectrometry have increasingly been utilized for their ability to continuously monitor, in a nondestructive way, the advancement of the reaction of thermoset resins under cure. This paper discusses an extension of this technique for the “in‐situ” monitoring of the crystallization of thermoplastics applied during an injection molding process. Electric sensors were positioned at the walls of the mold cavity so that an analysis of the volume dielectric properties of material during the filling, the post‐filling, and the cooling steps could be carried out. Poly(vinylidene fluoride) was chosen for this study. A correlation between the evolution of the dielectric parameters and the succession of the steps in this process was undertaken. The dielectric response was sufficiently sensitive to identify the steps of the closing of the mold, filling, post‐filling, cooling, and ejection of the part. In addition, information concerning the crystallization phenomenon near the wall or in the middle of the sample was collected. The gradual filling of the cavity of the mold was also identified by dielectric measurements. The temperature dependence of dielectric properties of the sample was beneficial in evaluating the increase of the temperature of the mold with the succession of injection cycles. The influence of the packing pressure has been clearly identified and confirms the usefulness of the dielectric method as a probe for detecting the shrinkage of the part during the optimization phase of the machine parameters. The dielectric method detailed herein provides a new non‐invasive technique and could be applied to a closed‐loop control of the injection molding process.     

Toughening of polylactide by melt blending with linear low‐density polyethylene

Melt blending of polylactide and linear low‐density polyethylene (LLDPE) was performed in an effort to toughen polylactide. In addition, two model polylactide‐polyethylene (PLLA‐PE) block copolymers were investigated as compatibilizers. The LLDPE particle size and the impact resistance of binary and ternary blends were measured to determine the extent of compatibilization. For the amorphous polylactide (PLA), toughening was achieved only when a PLLA‐PE block copolymer was used as a compatibilizer. For the semicrystalline polylactide (PLLA), toughening was achieved in the absence of block copolymer. To decrease the variability in the impact resistance of the PLLA/LLDPE binary blend, as little as 0.5 wt % of a PLLA–;PE block copolymer was effective. The differences that were seen between the PLA and PLLA binary blends were investigated with adhesion testing. The semicrystalline PLLA did show significantly better adhesion to the LLDPE. We propose that tacticty effects on the entanglement molecular weight or miscibility of polylactide allow for the improved adhesion between the PLLA and LLDPE. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3757–3768, 2003     

Effect of GABA,a Bacterial Metabolite,on Pseudomonas fluorescens Surface Properties and Cytotoxicity

Different bacterial species and, particularly Pseudomonas fluorescens, can produce gamma-aminobutyric acid (GABA) and express GABA-binding proteins. In this study, we investigated the effect of GABA on the virulence and biofilm formation activity of different strains of P. fluorescens. Exposure of a psychotropic strain of P. fluorescens (MF37) to GABA (10⁻⁵ M) increased its necrotic-like activity on eukaryotic (glial) cells, but reduced its apoptotic effect. Conversely, muscimol and bicuculline, the selective agonist and antagonist of eukaryote GABA_A receptors, respectively, were ineffective. P. fluorescens MF37 did not produce biosurfactants, and its caseinase, esterase, amylase, hemolytic activity or pyoverdine productions were unchanged. In contrast, the effect of GABA was associated to rearrangements of the lipopolysaccharide (LPS) structure, particularly in the lipid A region. The surface hydrophobicity of MF37 was marginally modified, and GABA reduced its biofilm formation activity on PVC, but not on glass, although the initial adhesion was increased. Five other P. fluorescens strains were studied, and only one, MFP05, a strain isolated from human skin, showed structural differences of biofilm maturation after exposure to GABA. These results reveal that GABA can regulate the LPS structure and cytotoxicity of P. fluorescens, but that this property is specific to some strains.