Zn in Athenian Black Gloss Ceramic Slips: A Trace Element Marker for Fabrication Technology

The black‐colored pottery slips produced in Athens from the 6th to 4th centuries B.C., had a consistent composition achieved through processing and refinement of raw clay. Little direct evidence has been established as to what were these refinement methods. To better understand how the slip material was prepared, the major and trace elemental compositions of 19 slips from different ceramic vessels and their corresponding bodies of Athenian red‐figure and black‐figure vases were determined using laser ablation inductively coupled plasma mass spectrometry (LA‐ICPMS). Notably higher Zn concentrations were found in the slips (271–1959 ppm) than in their corresponding body ceramics (<361 ppm). The Zn concentrations in the slips were also found to be above the natural background for typical clay (between 10 and 300 ppm) suggesting an unintentional anthropogenic enrichment of this metal. Based on the abnormally high Zn content of the slip, it is speculated that the clay was treated using vitriol (concentrated acid mine runoff which is rich in Zn), to induce flocculation and remove carbonate mineral phases from the raw material that, if present, would prevent the slip from vitrifying. This same signature of elevated levels of Zn with a corresponding Ce anomaly is also observed for black glosses produced in Corinthian and Etrurian (Italy) workshops indicating that these trace element signatures were imparted to the material by means of shared methods of manufacturing instead of being indicative of a single unique source for this material.     

Some Sources of Residential Satisfaction in an Urban Slum

Urban renewal planning has assumed that social benefits would accrue to the former residents of slums. But the meanings that the slum areas have for their residents and the consequent effects that relocation would have for them have not been adequately understood. Prior to being located from Boston's West End redevelopment area, most residents experienced profound satisfaction from living in the area. Their satisfaction derived, in large part, from the close associations maintained among the local people and from their strong sense of identity to the local places. In turn, people and places provided a framework for personal and social integration.     

Modern landscape architecture: monuments and icons

In November, 2005, The Journal of Architecture (Volume 10, Number 5) published Criticality in between China and the West by Jianfei Zhu: there followed extensive critical responses to this paper (on the architectural web in China; an extended seminar was held at Tongji University) which are detailed at the end of this section. Published here are two commentaries submitted to The Journal of Architecture, Tao Zhu's in direct response to the original essay, and Jianfei Zhu's response to Tao Zhu.     

Methodology for quantifying the volatile mixing state of an aerosol

Mixing state refers to the relative proportions of chemical species in an aerosol, and the way these species are combined; either as a population where each particle consists of a single species (‘externally mixed’) or where all particles individually consist of two or more species (‘internally mixed’) or the case where some particles are pure and some particles consist of multiple species. The mixing state affects optical and hygroscopic properties, and quantifying it is therefore important for studying an aerosol's climate impact. In this article, we describe a method to quantify the volatile mixing state of an aerosol using a differential mobility analyzer, centrifugal particle mass analyzer, catalytic denuder, and condensation particle counter by measuring the mass distributions of the volatile and non-volatile components of an aerosol and determining how the material is mixed within and between particles as a function of mobility diameter. The method is demonstrated using two aerosol samples from a miniCAST soot generator, one with a high elemental carbon (EC) content, and one with a high organic carbon (OC) content. The measurements are presented in terms of the mass distribution of the volatile and non-volatile material, as well as measures of diversity and mixing state parameter. It was found that the high-EC soot nearly consisted of only pure particles where 86% of the total mass was non-volatile. The high-OC soot consisted of either pure volatile particles or particles that contained a mixture of volatile and non-volatile material where 8% of the total mass was pure volatile particles and 70% was non-volatile material (with the remaining 22% being volatile material condensed on non-volatile particles).

© 2016 American Association for Aerosol Research     

Magnetically controlled shape-memory effects of hybrid nanocomposites from oligo(ω-pentadecalactone) and covalently integrated magnetite nanoparticles

The covalent integration of inorganic nanoparticles in polymer matrices has gained significance for improving the structural properties of polymer-based materials. Here we report on the performance of poly(ω-pentadecalactone) networks with magnetite nanoparticles as netpoints in their magnetically-controlled shape-memory capability. Hybrid nanocomposites with magnetite nanoparticle content ranging from 5 to 11 wt% were prepared by reacting two types of oligo(ω-pentadecalactone) (OPDL) based precursors with terminal hydroxy groups, a three arm OPDL (³AOPDL, M_n = 6000 g mol⁻¹) and an OPDL (M_n = 3300 g mol⁻¹) coated magnetite nanoparticle (∅ = 10 nm), with a diisocyanate. Homogenous hybrid nanocomposites were obtained independent from the weight content of the OPDL decorated nanoparticles in the samples. At 100 °C (T > T_m-OPDL) the covalent integration of the nanoparticles increased the mechanical strength with increasing weight content whereby the elasticity remained almost constant. In magnetically-controlled one-way dual-shape experiments the shape fixity decreased from 95% to 90% but the shape recovery increased slightly from 95% to 97% when the nanoparticle content was increased. In magnetically-controlled reversible dual-shape experiments the nanoparticles had a restraining effect and the maximum shape-change of 65% for hybrid nanocomposites with 5 wt% magnetite nanoparticles was reduced to 36% when the particle content was increased to 11 wt%. These results show that the performance of hybrid nanocomposites can be tailored by nanoparticle content, however in terms of their applicability either mechanical strength or actuation capability should be focussed in the material selection.     

Impact of the Cd2+ treatment on the electrical properties of Cu2ZnSnSe4 and Cu(In,Ga)Se2 solar cells

The present contribution aims at determining the impact of modifying the properties of the absorber/buffer layer interface on the electrical performance of Cu₂ZnSnSe₄ (CZTSe) thin‐film solar cells, by using a Cd²⁺ partial electrolyte (Cd PE) treatment of the absorber before the buffer layer deposition. In this work, CZTSe/CdS solar cells with and without Cd PE treatment were compared with their respective Cu(In,Ga)Se₂ (CIGSe)/CdS references. The Cd PE treatment was performed in a chemical bath for 7 min at 70 °C using a basic solution of cadmium acetate. X‐ray photoemission spectroscopy measurements have revealed the presence of Cd at the absorber surface after the treatment. The solar cells were characterized using current density–voltage (J–V), external quantum efficiency, and drive‐level capacitance profiling measurements. For the CZTSe‐based devices, the fill factor increased from 57.7% to 64.0% when using the Cd PE treatment, leading to the improvement of the efficiency (η) from 8.3% to 9.0% for the best solar cells. Similar observations were made on the CIGSe solar cell reference. This effect comes from a considerable reduction of the series resistance (R_S) of the dark and light J–V, as determined using the one‐diode model. The crossover effect between dark and light J–V curves is also significantly reduced by Cd PE treatment. Copyright © 2015 John Wiley & Sons, Ltd.     

Inversion of the Neugebauer equations

The Neugebauer equations are considered as the basic physical model for printing systems and, hence, they have often been used either in their original form or in any adapted version to model color printers. The main problem with printer models is that they relate color as a function of colorant values. In practice, however, the inverse relation is needed and, hence, the printer model needs to be inverted. This is done by making use of iterative techniques and, as a result, only one colorant combination will be obtained to achieve a given color. However, in this publication it is shown that, in the case of the Neugebauer model for three colorants, there are up to six solutions with which a given color can be reached. Between these solutions there may be a number of pairs that are complex conjugated. Mathematical formulas to find all these solutions are given. The extension of this inversion technique for more than three inks and for the localized Neugebauer equations is presented. © 1996 John Wiley & Sons, Inc.