A new robust algorithmic for multi-camera calibration with a 1D object under general motions without prior knowledge of any camera intrinsic parameter

In computer vision, camera calibration is a necessary process when the retrieval of information such as angles and distances is required. This paper addresses the multi-camera calibration problem with a single dimension calibration pattern under general motions. Currently, the known algorithms for solving this problem are based on the estimation of vanishing points. However, this estimate is very susceptible to noise, making the methods unsuitable for practical applications. Instead, this paper presents a new calibration algorithm, where the cameras are divided into binocular sets. The fundamental matrix of each binocular set is then estimated, allowing to perform a projective calibration of each camera. Then, the calibration is updated for the Euclidean space, ending the process. The calibration is possible without imposing any restrictions on the movement of the pattern and without any prior information about the cameras or motion. Experiments on synthetic and real images validate the new method and show that its accuracy makes it suitable also for practical applications.     

Evaluation of graded-channel SOI MOSFET operation at high temperatures

This paper presents a comparative analysis between graded-channel (GC) and conventional fully depleted SOI MOSFETs devices operating at high temperatures (up to 300 °C). The electrical characteristics such as threshold voltage and subthreshold slope were obtained experimentally and by two-dimensional numerical simulations. The results indicated that GC transistors present nearly the same behavior as the conventional SOI MOSFET devices with similar channel length. Experimental analysis of the g_m/I_DS ratio and Early voltage demonstrated that in GC devices the low-frequency open-loop gain is significantly improved in comparison to conventional SOI devices at room and at high-temperature due to the Early voltage increase. The multiplication factor and parasitic bipolar transistor gain obtained by two-dimensional numerical simulations allowed the analysis of the breakdown voltage, which was demonstrated to be improved in the GC as compared to conventional SOI transistors in thin silicon layer devices in the whole temperature range under analysis.     

Distinguishing video quality through differential matrices

Multicast multi-layered communications must implement efficient control algorithms to address undesirable network behaviors. This paper proposes two multi-metric algorithms for computing the rates of the video layers and improve the global video quality of a multicast session. In fact, we show that a single-metric approach may degrade some network parameters without obtaining any substantial improvements. Our first algorithm combines three metrics and a set of weights in such a way that one metric can be prioritized. This leads to an improved quality of multicast sessions, as we show through a number of experiments. In networks where the available resources are highly variable, however, the stability of the video quality is compromised if absolute values of the metrics are adopted. We then propose a second algorithm that uses the relative values of the metrics on a per-entry basis. Computation of the global quality of the multicast session is based on a differential matrix that stores the metrics for each receiver. This scheme takes into account the dynamics of the available resources and the heterogeneity of receivers. The great benefit of this approach is that the global video quality is always improved for every loop of the algorithm.     

A comparative study of two proposed CCC-r charts for high quality processes and their application to an injection molding process

High-quality industrial processes, characterized by a low fraction of non-conforming items, require paying special attention to the statistical control methods employed since traditional Shewhart's control charts are no longer suitable. In this article, CCC-r charts are considered based on the cumulative count of conforming items inspected until r non-conforming items are observed. However, even though these charts have shown to be useful for high-quality processes, they are characterized by a biased average run length (ARL). In order to help engineers interested in this control methodology to select the best option, a computational study of statistical validation was performed to compare the two most outstanding procedures for the cases r = 2, 3, and 4. The performance was evaluated based on the ARL under control. The application of the CCC-r chart to a real process is shown with data from an automobile parts plant. Finally, analysis and discussion of the results are presented.     

An experimental evaluation of cross-layer routing in a wireless mesh backbone

Over the latest few years, cross-layer design in wireless networks has drawn great attention from the research community. One of the main arguments in favor of such techniques is that the hop-count metric alone is not enough to capture the specificities of wireless links (e.g., interferences, collisions, fading). In this paper, we address a simple yet fundamental question: What are the real improvements that cross-layering can bring to routing performance when compared to the simple hop-count metric? In our experiments, we consider the backbone of a real wireless mesh network composed of 12 routers deployed in an office building. We focus on the stability of routes and their persistence. In spite of the nature of cross-layer metrics that take into account information from different layers, lets them be very reactive to changes, we observe that using these metrics, pairs of nodes tend to mainly use the same set of two or three routes between them.     

Damage Model and Progressive Failure Analyses for Filament Wound Composite Laminates

Recent improvements in manufacturing processes and materials properties associated with excellent mechanical characteristics and low weight have made composite materials very attractive for application on civil aircraft structures. However, even new designs are still very conservative, because the composite failure phenomenon is very complex. Several failure criteria and theories have been developed to describe the damage process and how it evolves, but the solution of the problem is still open. Moreover, modern filament winding techniques have been used to produce a wide variety of structural shapes not only cylindrical parts, but also “flat” laminates. Therefore, this work presents the development of a damage model and its application to simulate the progressive failure of flat composite laminates made using a filament winding process. The damage model was implemented as a UMAT (User Material Subroutine), in ABAQUS^TM Finite Element (FE) framework. Progressive failure analyses were carried out using FE simulation in order to simulate the failure of flat filament wound composite structures under different loading conditions. In addition, experimental tests were performed in order to identify parameters related to the material model, as well as to evaluate both the potential and the limitations of the model. The difference between numerical and the average experimental results in a four point bending set-up is only 1.6 % at maximum load amplitude. Another important issue is that the model parameters are not so complicated to be identified. This characteristic makes this model very attractive to be applied in an industrial environment.     

Edible mushrooms: a potential source of essential amino acids,glucans and minerals

The main chemical and biochemical constituents of nine edible mushrooms were evaluated in this study. An enzymatic method was used to determine the α‐ and β‐glucan contents, and the amino acid (AA) profiles were evaluated by RP‐HPLC‐DAD. The recommended dietary allowance (RDA) of the nutrients was evaluated. Finally, principal component analysis (PCA) was used to group the mushrooms according to their AA, glucans and chemical composition. All mushrooms evaluated can be considered as a potential and alternative source of dietary fibre (24.4–46.62%) and protein (16.47–36.96%) in a diet, with low contents of fat (1.40–2.08%). Phosphorus, potassium, iron, copper and zinc were the main minerals found in the mushrooms, whereas sodium concentration was negligible. All essential AA were detected in the mushrooms, with Pleurotus ostreatus (black oyster) representing the main source of essential amino acids among the samples. The contents of β‐glucan ranged from 1.58 to 16.91 mg g^?1 of dry matter among the mushrooms and Pleurotus eryngii presented the highest amount of this component. Pleurotus ostreatus (black oyster) and P. eryngii were also grouped together due to similarities in their phosphorous and arginine contents. Among the main results, it can highlight the high concentration of dietary fibre and essential amino acids of the edible mushrooms.     

Molds and Resists Studies for Nanoimprint Lithography of Electrodes in Low-Voltage Polymer Thin-Film Transistors

A low-cost patterning of electrodes was investigated looking forward to replacing conventional photolithography for the processing of low-operating voltage polymeric thin-film transistors. Hard silicon, etched by sulfur hexafluoride and oxygen gas mixture, and flexible polydimethylsiloxane imprinting molds were studied through atomic force microscopy (AFM) and field emission gun scanning electron microscopy. The higher the concentration of oxygen in reactive ion etching, the lower the etch rate, sidewall angle, and surface roughness. A concentration around 30 % at 100 mTorr, 65 W and 70 sccm was demonstrated as adequate for submicrometric channels, presenting a reduced etch rate of 176 nm/min. Imprinting with positive photoresist AZ1518 was compared to negative SU-8 2002 by optical microscopy and AFM. Conformal results were obtained only with the last resist by hot embossing at 120 °C and 1 kgf/cm² for 2 min, followed by a 10 min post-baking at 100 °C. The patterning procedure was applied to define gold source and drain electrodes on oxide-covered substrates to produce bottom-gate bottom-contact transistors. Poly(3-hexylthiophene) (P3HT) devices were processed on high-κ titanium oxynitride (TiO _x N _y ) deposited by radiofrequency magnetron sputtering over indium tin oxide-covered glass to achieve low-voltage operation. Hole mobility on micrometric imprinted channels may approach amorphous silicon (～0.01 cm²/V s) and, since these devices operated at less than 5 V, they are not only suitable for electronic applications but also as sensors in aqueous media.