An evaluation of Ce-Pr oxides and Ce-Pr-Nb oxides mixed conductors for cathodes of solid oxide fuel cells: Structure, thermal expansion and electrical conductivity

Ceria doped with praseodymia and niobia has been studied in order to evaluate the possibility of applying these materials as cathodes for solid oxide fuel cells. The content of crystallographic phases and their lattice parameters have been determined by X-ray diffraction, the thermal expansion coefficient has been characterised by the dilatometry technique and the electrical conductivity has been measured by complex impedance spectroscopy and by the four probe DC technique. The results have shown the presence of one fluorite phase in binary compositions (CeO₂-PrO_2−x) for PrO_2−x concentrations up to about 20 mol% and two fluorite phases with different lattice parameters for higher PrO_2−x concentrations. The addition of 3 mol% NbO_2·5 has allowed the stabilisation of a single fluorite phase up to 50 mol% PrO_2−x. The thermal expansion coefficient varies between 0 and 30 × 10⁻⁶/K depending on composition and temperature. The electrical conductivity is mainly electronic and thermally activated. The conductivity exceeds 0·1 S/cm at 800°C for compositions with 40 to 50 mol% PrO_2−x.     

Fiber diffraction study of spicules from marine sponges

A synchrotron radiation fiber diffraction structural study of the axial filament of siliceous spicules from two species of marine sponges (the Demosponge Geodia cydonium and the Hexactinellid Scolymastra joubini) was carried out. The sharpness of the spots in the diffraction patterns indicated that the protein units in the filament of both samples were highly organized. A possible explanation is that the arrangement of the protein units is similar to that of the pores in highly ordered siliceous mesoporous materials. Nevertheless, the diffraction patterns are quite different for the two types of spicules. The pattern of G. cydonium is consistent with a regular 2D hexagonal lattice of protein units in the direction perpendicular to the spicule axis, with a repeating distance of 5.8 nm; the units are linked to form fibers along the axis. The pattern of S. joubini indicates the presence of two different 2D lattices in which the repeating protein units are inclined by +50 degrees and -50 degrees with respect to the elongation axis; the distance between the units increases to 8.4 nm. This 2D model is consistent with hexagonal packing of spirally oriented cylindrical protein units elongated along the filament axis.     

Liquid-crystallization induced reactions. Microstructure and morphology of copolyesters synthesized by transesterification of PET with some LCP monomers

The transesterification of poly(ethylene terephthalate) (PET) with a mixture of sebacic acid (S), 4,4′-diacetoxybiphenyl (B) and 4-acetoxybenzoic acid (H), carried out under conditions expectedly favoring the formation of a p(ET-SBH) random copolyester, produces biphasic materials with an isotropic matrix and a highly fibrous, liquid-crystalline dispersed phase. Spectroscopic, calorimetric, microscopic and diffractometric characterization of the fractions separated by solvent extraction has shown that the two phases consist of practically random copolyesters having different average composition. Interestingly, the degree of aromaticity of the matrix is even lower than that of PET, whereas that of the minor phase is appreciably higher than that calculated for the SBH copolyester that would be produced from the monomer mixture in the absence of PET. This unexpected result is interpreted on the basis of an enthalpy-driven progressive diffusion of aromatic-rich material toward the mesophase which segregates at an early stage of the polycondensation within the isotropic mixture of low molar mass oligomers initially produced by the PET acidolysis. Thus, an increasing differentiation, rather than an equilibration, of the composition of the two phases takes place. It is noteworthy that, despite the strong compositional difference, the two phases of these products show fairly good compatibility and interfacial adhesion.     

Correlation between friction of articular cartilage and reflectance intensity from superficial images

The lubrication mechanism of articular cartilage is characterized by an efficient performance. In this work, friction of articular cartilage was evaluated with in-site images of articular surface. The images were captured with the laser light reflected at the interface between a prism and articular cartilage. The attenuation of reflectance was associated with the increase of the contact of collagen network of articular cartilage. The light reflectance and friction coefficient for short sliding presented a significant positive correlation. Friction tests were also carried out for short (30 s) and long (300 s) preloading times. The results indicate that depletion of fluid film is responsible for the increase of friction and the recovery of the fluid film was observed for the long preloading after the early stage of sliding.     

Atomic force microscopy of protein films and crystals

A customized atomic force microscopy (AFM) instrument optimized for imaging protein crystals in solution is described. The device was tested on crystals and Langmuir-Blodgett (LB) films of two proteins with quite different molecular weights. This approach enables the periodicity and morphology of crystals to be studied in their mother liquid, thereby preserving the native periodic protein crystal structure, which is typically destroyed by drying. Moreover, the instrument appears to distinguish protein crystals from salt crystals, which under the optical microscope are frequently quite similar, the difference between them often being revealed only during x-ray analysis. AFM estimates of the packing, order, and morphology of the given single proteins appear quite similar in the LB thin film and in the crystals, which means that routine crystal measurements can be performed at high resolution. The AFM consists of a custom-built measuring head and a homemade flexible SPM controller which can drive the head for contact, noncontact and spectroscopy modes, thus providing the user with a high degree of customization for crystal measurement.     

Thermal AFM: a thermopile case study

In this work, an atomic force microscope (AFM) with an integrated thermal sensor has been used to obtain the local spatial distribution of temperatures in a micromachined thermopile with submicron resolution. In this communication, we will show how the dimensional, structural and functional characteristics of a thermopile suits well with the requirements for AFM thermal imaging, and how a deeper insight of the thermopile operation can be gained with the aid of these advanced scanning probe-based tools.